Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.


What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:


DVD Player Hacks Updated Add
Durabrand DVD1002 21 user region code/hacks March 18, 2010 Post region code/hack comment
Region code hack posted by JASK40, July 18 2006:

I bought 3 of these under the Durabrand DVD1002 name, they where bought in July 2006 but manufactured in May 2006. It depends on when in May it manufactured as to which hack will work. Try both listed here. Good Luck

switch on.
open lid.
press STOP on remote.
enter code 2379 on remote.
region code list will appear on screen, using the UP/DOWN buttons on remote select required region (9 is multi-region).
press OK on remote.
close lid.
press STANDBY on player. ALL DONE!.

PLEASE NOTE....when selecting your region you will need to be quick as the info on screen will only display for a few seconds if no buttons are pressed.

-----------------------------------------------------------

1. Power ON
2. Open Tray
3. on the remote use the code.
359735
4.Use region 0 to make player region FREE.




Region code hack posted by Si, August 13 2006:

Great stuff. The second hack worked with a DVD player from Walmart on 10-Aug-2006.



Region code hack posted by acl, August 14 2006:

The second hack worked with a DVD1002 bought today at Wal-Mart in Brazil.



Region code hack posted by The7Dwarfs, August 20 2006:

Verified the following region free hack on Duraband DVD1002 today.

1. Power ON
2.Open Tray
3.Using the remote enter 359735
4. Set to region "0"




Region code hack posted by ash-man, January 07 2007:

2nd hack mentioned by JASK40 (and also by The7Dwarfs) worked on durabrand 1002 purchased in jan 2007. Thanks guys!!



Region code hack posted by Beargarden, January 27 2007:

This hack also works for the Durabrand DVD-1005.
Bought from Asda (UK) Jan 2007. Same model as on sale in Walmart (US).
Switch On.
Open lid.
Press STOP on remote.
Enter code 2379 on remote.
Region code list will appear on screen - use the Up/Down buttons on remote to select region (Region 0=multi-region).
Press OK on remote.
Close lid.
Press STANDBY on player.

Your player may already be set to region 0 if you bought it from Asda, so will play non region 2 disks with no hack required.



Region code hack posted by Hans, March 06 2007:

I used the 2nd hack by JASK40(also by The7 Dwarfs) to make the player bought at Walmart on March 5, 2007 region free. I bought this specific player because I watch DVDs from all over the world and these hacks are listed on your site and they did not involve any complicated steps.



Region code hack posted by firyembers, May 28 2007:

I used the 2nd hack by JASK40(also by The7 Dwarfs) to make the player bought at Walmart in USA on May 28th,2007 region free.
Manufacture date December 2006



Region code hack posted by Juan Gonzalez, May 29 2007:

I have one DVD 1002 manufactured on March 2007, purchased on May 2007, I try both hacks and didn't worked.



Region code hack posted by Roman, June 24 2007:

power on.
open lid.
press STOP on remote.
enter code 9753 on remote.
region code list will appear on screen.
using the UP/DOWN buttons on remote select required region (0 is multiregional).
press OK on remote.
close lid.




Region code hack posted by MadMax, July 18 2007:

I just bought A DVD1002 from Walmart, Manufactured April, 2007 and this hack by Roman (posted above) worked for this one.

power on.
open lid.
press STOP on remote.
enter code 9753 on remote.
region code list will appear on screen.
using the UP/DOWN buttons on remote select required region (0 is multi-regional).
press OK on remote.
close lid.

Thanks Roman!





Region code posted by Bender, August 14 2007:

Success here too from Roman's hack!!! Thank you so much!!!



Region code posted by ebbnflow, September 02 2007:

Roman's worked but I had to try it it a few times. This DVD player will not play DVD's without a menu. If you remove the menu from your dvds when you burn them, this player will NOT play them.



Region code hack posted by Zombie, September 19 2007:

Roman's hack was a success. However, before it would work I had to go to Setup, change TV System to AUTO, exit Setup, enter the hack, go *back* into Setup and change TV System back to NTSC.



Region code hack posted by nyakuro, December 03 2007:

None of the hack are working. I just bought the player last week. the manufacturing date is Sep 2007. I have another one i bought long time ago with a manufacuturing date of Dec 2006 and one of the hacks work on that one.

Does anyone know a hack that would work on the new production?



Region code hack posted by mikeguen, December 13 2007:

I bought a Duraband DVD1002 from Walmarts 10 Dec 2007. The Manufactured date is September, 2007 and the hack by Roman (posted above) worked for mine as well. I tried the earlier posted hack by JASK40, but JASK40 did not work on my unit.

This is the hack that worked on my unit:

1. Power on.
2. Open the lid.
3. Press STOP on remote.
4. Enter code 9753 on remote.
5. Region code list will appear on screen.
You only have a few seconds and it will disappear.
If it disappears, just turn the power off and start
again. This unit is very forgiving. You can do this
as many times as you like.
6. Using the UP/DOWN buttons on remote select required
region (0 is multi-regional).
7. Press OK on remote.
If you take too long, the unit will save the region
you have on the screen and exit menue by itself.
8. Close lid.
9. Go to step 3. to confirm the change was saved to memory.
10. Play any VIDEO / AUDIO disc you like.

Thanks Roman!

Mike



Region code hack posted by litlfeat, December 17 2007:

Just purchased the Durabrand DVD1002 from Walmart on December 17, 2007 and was manufactured in August 2007. Used the hack posted by Roman above, worked like a charm.

1. Power on.
2. Open the lid.
3. Press STOP on remote.
4. Enter code 9753 on remote.
5. Region code list will appear on screen.
You only have a few seconds and it will disappear.
If it disappears, just turn the power off and start
again. This unit is very forgiving. You can do this
as many times as you like.
6. Using the UP/DOWN buttons on remote select required
region (0 is multi-regional).
7. Press OK on remote.
If you take too long, the unit will save the region
you have on the screen and exit menue by itself.
8. Close lid.
9. Go to step 3. to confirm the change was saved to memory.
10. Play any VIDEO / AUDIO disc you like.

Thanks Roman!




Region code hack posted by dth33823, January 15 2008:

none of the codes listed are bringing up the region unlock screen. My durabrand 1002 was purchase Jan 4 2008 and manufactured July 2007. Any other help anyone can give me?



Region code hack posted by jan28, February 28 2008:

Bought my player from Asda, manufactured September 2007 and used the code 2379. Discovered the player already set to region 0 in selection panel so no need to do anything more.



Region code posted by lvlv52, June 23 2008:

By appearances, WalMart has stopped dealing this unit. I just bought mine from an Ebay seller called WORLD'S BEST DEALS who appears to have a s**tload of them. The box DOES say WalMart, but I'm clueless as to where to find the manufacture date (I'm a little slow), BUT...the 9753 code did the trick! This is probably the 4th or 5th time I've found hack codes on this site, but the 1st time I've stopped to say: THANK YOU! ALL OF YOU, who make this info available!! YOU ALL ROCK, and you're all going to heaven!



Region code hack posted by Grateful1, March 18 2010:

Have Durabrand DVD1002 mfg June 2006 for region 1. Tried 2nd region code hack by JASK40 and did not work. Then tried 1st region code hack by JASK40 and it worked but my menu did not have a region 9. I used region 0 instead and all is OK. That info may be of use to someone else. Thanks JASK40 for the hack.




1 DVD Hack hits, Showing 1 to 1 DVD Hacks
 - 

New hacks = New region code/hack comments since your last visit.
Search   Contact us   About   Advertise   Forum   RSS Feeds   Statistics   Tools   

Site layout: Default Classic Blue

Affiliates: codecs.com   VSO Software

©1999-2014 videohelp.com