Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.

What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:

DVD Player Hacks Updated Add
Samsung DVD-V5500

7 user region code comments

February 05, 2006 Post region code/hack comment
PostRegion code hack posted by shaddo, May 01 2005:

To convert the Samsung DVD-V5500 player to Multi-Region playback make sure you have
no disc or tape in and then Turn it on. When the display shows "no disc"...

1. Press the DVD button on your remote control so the Samsung DigitALL logo appears on the screen

2. Press the SUBTITLE button on your remote control

3. Using your remote control enter the code: 7, 6, 8, 8, 4

4. The current region should be displayed on the screen. (eg "4") If this doesn't happen then turn off
and then on and try again

5. Press the 9 button on your remote control for Region free

6. Press the SUBTITLE Button on your remote.

7. Press the Open button on your player

8. Close Tray.

9. Power the unit off, then power the unit on again

10. Enjoy DVD as it should be, Region Free :-)

PostRegion code hack posted by mike stark, May 17 2005:

Tried the first listed hack with no joy. however, worked with the following:

no dvd or tape in machine.
press dvd so samsung digitall appears with 'no disc'

press subtitle, then 5 7 5 3 8
your region should appear at top corner.
press number for desired region, or 9 for multi.
press subtitle.


PostRegion code hack posted by Sternhammer, August 31 2005:

I can confirm that the procedure posted by shaddo works on my Australian
Region 4 Samsung DVD-V5500. If you bought this unit in another region you
might try some of the other Samsung codes, such as:

Region 1 coded type: 2 9 3 3 4
Region 2 coded type: 3 8 7 6 7
Region 3 coded type: 5 6 7 3 2
Region 4 coded type: 7 6 8 8 4
Region 5 coded type: 5 3 8 1 4
Region 6 coded type: 2 4 4 6 2

(I found these codes on the Samsung DVD-S224 hacks page: .)

PostRegion code hack posted by dhm, September 03 2005:

New Samsung DVD-V5500 purchased 9/3/2005 at Fry's in Southern California does not respond to [Subtitle]##### or [Angle]4327 hacks. Version number on motherboard is DVD-V5500/XAA Rev01 AK41-00334A

PostRegion code hack posted by george, October 21 2005:

V5500 purchased in Australia Oct 2005

I had problems with hack given by shaddo, until I turned on Screen Messages. The default is Screen Messages off and no hack would work.

Turn on Screen Messages using Menu Setup Screen Messages.

Then follow hack steps for a region free player!

PostRegion code hack posted by Uchina, December 08 2005:

I purchased Samsung DVD-V5500 from circuit city in Southern California in December, 2005. Tried all the hacks and failed! I had more research on the web and found the remote control is in the US (Model#: 00021C) and Australia (Model#: Unkown) is different!! (If you look at the user manual for Australia and the US on the Samsung site, you can tell the differences)I believe that is why the hacking code is in Australia works but not in the US..
Also I found my DVD-V5500 Model Number is DVD-V5500/XAA. I want to know Australia mode number!
I believe that the people is in the US need to find out own hacking code..
I will try..

PostRegion code hack posted by jan, February 05 2006:

I can verify mike stark's hack. Used it on a Samsung DVD-V5450 with success!

It was a region 2 player (Sweden).

(I now just have the rca -> toslink conversion left...)

1 DVD Hack hits, Showing 1 to 1 DVD Hacks

New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!
Search   Contact us   Privacy Policy   About   Advertise   Forum   RSS Feeds   Statistics   Software   

Site layout: Default Classic Blue