What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
9 user region code comments
|April 08, 2022||Post region code/hack comment|
|Region code hack posted by Sallyj, December 04 2017:|
Using your remote control do the following:
1. Power ON without disc. Press OPEN TRAY
2. Press the BLACK button BELOW the yellow "C" button.
3. Press 7-6-8-8-4 (or your region code).
3. The current region code will display at the top left
of the screen.
4. Quickly Press 9 to change to free region.
Power off with RC
Power On with RC
|Region code posted by actinium89, January 06 2018:|
When I press the BLACK button on the RC of the BD-J5500/ZF, nothing happens.
|Region code posted by actinium89, January 07 2018:|
After having pressed the BLACK button on the RC of the player (model code: BD-J550/ZF), I entered the number 57538 but my current region code "2" was not displayed on the screen.
|Region code hack posted by kevinallein, January 09 2018:|
Hi, I have been trying to use that hack on a BD-J5500/EN purchased in Germany in January 2018. It lists, that the current firmware version is B-JM63BSPWWB-1018.0 and whatever I try, I cannot get it to display the region code number as described in the hack. Can you please report, which firmware version was on the player, where the hack worked ?
|Region code hack posted by Warren, October 15 2018:|
Using a slight variation of Sallyj’s instructions I was able to successfully reset the DVD player’s region code to “9”. Foreign DVDs that were previously rejected now play well. I have the Samsung remote control AK59-00149A, and Samsung DVD player model # BD-J5500/ZS, purchased in South America and originally set to region “4” (code 76884).
The procedure I used is as follows. Timing seems important. All button presses on the remote control should be done in series with no intervening delays.
Power on the TV and DVD player (no disk inserted)
On the remote control press the third button in the bottom row (same as “BLACK button BELOW the yellow "C" button” per Sallyj)
Enter your unit’s 5-digit region code.
A “9” then appears momentarily in the upper left quadrant of the screen. The procedure is successfully completed.
Thus in my case the entries on the remote control (steps 2-4) were:
[BLACK button] 7 6 8 8 4 9
all pressed in series without pausing.
|Region code posted by RobBeml, November 19 2018:|
Samsung BD J5500,
Region 2 (assume, bought in Germany)
Firmware 1022.0 (B-JM63BSPWWB-1022.0)
Tried region 4, DVD getting region error code.
Tried both variation above (with and without eject), pressed keys quickly without delay.
Current or new region never appeared on screen, Region 4 DVD was not able to play.
Tried download FW version 1017.1, could not downgrade.
|Region code posted by MrMerlin_61, April 13 2019:|
I tried it on samsung BD-J5500/xe in sweden and I cant get it to work. Suggestions?
|Region code hack posted by Mark, April 17 2021:|
Make dvd multi region
|Region code hack posted by Noe, April 08 2022:|
Me gustaría poder ver películas de
cualquier región en mi bluray
|1 DVD Hack hits, Showing 1 to 1 DVD Hacks|
= New region code/hack comments since your last visit.