Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.


What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:


DVD Player Hacks Updated Add
Pacific DVD-1002 17 user region code/hacks July 29, 2009 Post region code/hack comment
Region code hack posted by chilli, January 09 2003:

PACIFIC 1002 - XMAS STOCK AT ASDA MULTI REGION HACK

1. PUT A REGION 2 DISC IN PLAYER

2. WHEN IT IS LOADING UP PRESS "SETUP"

3. PRESS "7" FOR MULTI REGION

4. PRESS "PAUSE/STEP"

5. PRESS PREVIOUS " |> "

6. PRESS SETUP

YOUR PLAYER IS NOW MULTI REGIONAL.. IS YOU WANT TO SET THE REGION IN STEP 3 PRESS 1 FOR USA OR WHATEVER YOU REQUIRE....




Region code hack posted by asa, February 10 2003:

i bought this model at asda on the6 feb 03 and no other hacks worked on this model. i cant belive this worked. it should only work on a warfdale 750 but here goes.
switch on.on the remote press "open/close",0,1,2,3,open/close and it plays straigt away. but nothing is shown on the screen.

originaly from www.gavsterzone.freeserve.co./ukdvdhack.
hope this works for you good luck



Region code hack posted by NJK, March 23 2003:

It's true - a quality DVD player from Asda for 59.95. Highly recommended. This 1359 hack worked with my Pacific 1002 purchased March 03.
Note. There is no on screen display or any indication on the machine when entering the hack.

Switch machine on and using the remote control only:
1. Press 'open/close' button (the draw should be left open).
2. Press the 'clear' button.
3. Press '1'.
4. Press '3'.
5. Press '6'.
6 Press '9'.
7. Press '0' (zero for multi-region).
8. Press 'open/close' button.
End.

You now have the best multi-region bargain in the UK!





Region code hack posted by Dean, June 07 2003:

I performed the
Open, Clear, 1, 3, 6, 9, 0, Close hack to make the player Region Free.

I then performed the
Open, Clear, 4, 5, 6, 1, 0, Close to remove the macro.

Both hacks took seconds and worked fine



Region code posted by Keith Brooks, September 01 2003:

I have applied the hack

open
clear
4
5
6
1
0
close

and the macrovison was removed.



Region code hack posted by rOtTiNgFoXbReAtH, October 27 2003:

the macro hack DOESNT work.
it only works on certain discs,and you have to change the region of the discs to the exact region to get it to work.i.e:region2 discs,the player must be set to region 2.
apart form that,some versions of this player,the code is a little different:-

make sure theres a disc in the drive(preferably one that wouldnt work before,like a region 1 disc).
Step 1 Press "SET UP"
Step 2 Press 7 for all region codes
Step 3 press "PAUSE/STEP"
Step 4 Press "PREVIOUS
Step 5 Press "NEXT"
Step 6 Press "SET UP"

if this doesnt work,just open the tray with the disc still in it,and upon pressing setup for the last time,simply close the drawer,making the disc load.

this was tried today(27,10.03),with one of the new 1002W's that i purchased for a family member.

one of the dvd players wouldnt let me hack it with the 1369 code,the other wouldnt let me play dvd+Rs.
but this code worked on the player when 1369 didnt work.





Region code hack posted by Shaun, December 07 2003:

I have tried all the above hacks, and I cannot get any of them to work, after trying several times! I have found a hack though, that worked first time, and took about 10seconds! This will make your player region free!

1. switch on dvd with remote (leave drawer closed)
2. Press: setup
3. press: 7 (note nothing will happen)
4. press: pause/setup button (again nothing will happen)
5. press: previous/I<< button (nothing will happen)
6. press: Next/>>I button (nothing will happen)
7. press: setup

Ok, now all you have to do is press your open/close button insert a disc and close drawer, your player will now load any region dvds! This I guarantee, but as you do it nothing will happen on your screen so dont be alarmed, It does work, good luck,and have fun!!



Region code hack posted by Dave, December 18 2003:

I`ve had a 1002 for about a year never bothered about region hacks before until i bought a dvd which my player never supported.
I triedv the open/close 13690 open/close hack it never worked..
i then tried this one
make sure theres a disc in the drive(preferably one that wouldnt work before,like a region 1 disc).
Step 1 Press "SET UP"
Step 2 Press 7 for all region codes
Step 3 press "PAUSE/STEP"
Step 4 Press "PREVIOUS
Step 5 Press "NEXT"
Step 6 Press "SET UP"

if this doesnt work,just open the tray with the disc still in it,and upon pressing setup for the last time,simply close the drawer,making the disc load.


This works a treat good job all the people who work these things out...

Thanks

Dave




Other hack posted by Ant-HJ, February 15 2004:

Depending on when you purchased you Pacific DVD and which batch its from depends on the hack that will work for you..

ALSO you may find that your player is reigon free anyway as i found with the many my friends and relitives have purchased from our local ASDA (Stoke-on-Trent,UK)

Another thing i've noticed is that some of these players when you insert a Data-CD displays a menu where you can access the disks folders, where as some (usually the older batch) dont..





Region code hack posted by Danny, May 03 2004:

Press open close then hold clear while the draw is open and press 0,1,2,3 and keepin hold of clear put ur disk in and press close and u wil b able 2 use it 2 play pc games with the remote and play any region dvd



Region code hack posted by stuhar, January 20 2005:

note I have found the hack for the pacific phc 203 home theater it will work for sure if you follow these instructions

found the hack for this player. here it is

1. press power on your remote to start the player.

2. press open on your control to open the disc tray.

3. Press the the volume button to maximum.

4. whilst it still displays the word maximum press language.

5. an onscreen display will apear.

6. prees up or down to choose your selected region, and then pree enter.

jobs a good un, enjoy.




Region code hack posted by rob, March 04 2005:

new model pacific 1002mk2 (ASDA) using remote.;
press open on remote
press clear
press 1-3-6-9 Then 0(for multiregion)

Press close

It's important to note that you will not see anything happen on screen or display!
The buttons are small,so you'll have to be precise.



Region code hack posted by Geoff, May 07 2005:

Phantom of the Opera (Region 2)DVD will not play sound when MultiRegion is set
Open/Close Clear 1369 0 Open/Close
To get the sound re-set to Region 2
Open/Close Clear 1369 2 Open/Close




Region code hack posted by leanne, April 19 2006:

regional hack code



Region code hack posted by jaspersherry, June 13 2008:

Pacific 1002MK2



Region code hack posted by ThuhPickle, July 24 2008:

Ok look, If you just want to simply make your DVD player multi regional then do the following using the remote-


First- Open, Clear, 1, 3, 6, 9, 0, Close

Then- Open, Clear, 4, 5, 6, 1, 0, Close

Both hacks take seconds and work fine.

I can now watch my New Zealand dvds on my Scottish DVD Player!



Region code hack posted by azcalumxx, July 29 2009:

post region code




1 DVD Hack hits, Showing 1 to 1 DVD Hacks
 - 

New hacks = New region code/hack comments since your last visit.
Search   Contact us   About   Advertise   Forum   RSS Feeds   Statistics   Tools   

Site layout: Default Classic Blue

Affiliates: codecs.com   VSO Software

©1999-2014 videohelp.com