Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.

What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:


DVD Player Hacks Updated Add
Panasonic DP-UB820

2 user region code comments

June 27, 2022 Post region code/hack comment
PostRegion code hack posted by Region4, April 19 2020:


Region-free hack (for DVD playback only) performed using an older OneforAll remote model URC-3450/3451.

The procedure used is practically the same as for the DP-UB320. Tested on an Australian R4-locked unit.

On the OneforAll remote:

1. Press DVD
2. Press and hold the 'magic' button until the red power button flashes twice
3. Enter 0490
---------------
4. Press and hold the 'magic' button until the red power button flashes twice
5. Enter 994. The red power button should flash twice
6. Press the 'magic' button again (but don't hold it down). The red power button should flash once
7. Enter 00191
8. Press 1 (the power button will flash twice)
----------------
9. REPEAT STEPS 4-6
10. Enter 00120
11. Press 2 (the power button will flash twice)
----------------
12. REPEAT STEPS 4-6
13. Enter 00065
14. Press 3 (the power button will flash twice)
----------------
15. REPEAT STEPS 4-6
16. Enter 00180
17. Press 4 (the power button will flash twice)
----------------
18. REPEAT STEPS 4-6
19. Enter 00143
18. Press 5 (the power button will flash twice)
----------------
19. REPEAT STEPS 4-6
20. Enter 00155
21. Press 6 (the power button will flash twice)
----------------
22. REPEAT STEPS 4-6
23. Enter 00122
24. Press 7 (the power button will flash twice)
----------------
25. REPEAT STEPS 4-6
26. Enter 00117
27. Press 8 (the power button will flash twice)
----------------
28. REPEAT STEPS 4-6
29. Enter 00129
30. Press 9 (the power button will flash twice)
----------------
31. REPEAT STEPS 4-6
32. Enter 00123
33. Press 0 (the power button will flash twice)

The remote is now programmed.

-----------------

34. Turn on the disc player and wait for it to fully boot up. Make sure there isn't a disc inside.
35. On the OneforAll remote, press 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, with a slight pause between each button press.
36. The player should restart and now be region free for DVD playback.





PostRegion code hack posted by RFETN, June 27 2022:


Only known to work for Blu-ray playback of Zone B discs in a Zone A player purchased in the summer of
2022 in the USA.

1. Let the player attempt to play the Zone B Blu-ray.
2. It will fail with the words "STOP" in the front display.
3. Press the "Top Menu" button on the report control twice.
4. In a few seconds, the main menu will appear (skipping all the screens beforehand).

Similar hack will skip all the screens before the main screen for Zone A Blu-ray's too! When the
first screen appears, press "Stop" and let the disc spin down. Then pick up at step #3 for the same
result!




1 DVD Hack hits, Showing 1 to 1 DVD Hacks
   

New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!
Search   Contact us   Privacy Policy   About   Advertise   Forum   RSS Feeds   Statistics   Software   

Site layout: Default Classic Blue

Affiliates: free-codecs.com

©1999-2024 videohelp.com