Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.

What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:


Ordered by Name
1 DVD Hack hits, Showing 1 to 1 DVD Hacks
   
DVD Player Hacks Updated Add
Philips DVDR3380

8 user region code comments

September 01, 2009 Post region code/hack comment
PostRegion code hack posted by marky- mark, June 16 2006:


this hack is the same as any other newer philips recorders (eg; dvdr-3305)this hack is from this model 3305 posted earlier; just repeat these SIMPLE steps......

1/MAKE SURE NO DISC IS IN MACHINE SWITCH ON AND WAIT UNTIL DISPLAY SHOWS NO DISC ENTER 0009 AND PRESS OK THIS WILL DISPLAY THE REGION CODE THE MACHINE IS SET TO. open /close tray
2/ DISPLAY SHOWS NO DISC; ENTER 0086000 AND PRESS OK . again ....open /close the tray.
now region free ...to vary-fy region . use step 1 again
ENJOY......




PostRegion code hack posted by The Oz, September 03 2006:


Further to the earlier hack which I tried and found didn't work if you only did what was stated in that hack .....

While the Region does show as 0 after the hack is applied, trying to play a DVD from a different region fails.

What you need to do after applying the hack is to physically power off the machine, and then power it back on. It seems that the Region is stored in memory when the box is 'booted' and isn't overridden there when the patch is applied, but only when the re-boot takes place.

After that, DVDs from all regions are fine!



PostRegion code hack posted by Erlend Hoiland, November 01 2006:


1/MAKE SURE NO DISC IS IN MACHINE SWITCH ON AND WAIT UNTIL DISPLAY SHOWS NO DISC ENTER 0009 AND PRESS OK THIS WILL DISPLAY THE REGION CODE THE MACHINE IS SET TO. open /close tray
2/ DISPLAY SHOWS NO DISC; ENTER 0086000 AND PRESS OK . again ....open /close the tray.
now region free ...to vary-fy region . use step 1 again
ENJOY......
3/ Complete the upgrade by stopping the power to it an restarting it that way.
4/ Enjoy! :)



PostRegion code hack posted by Brenton Smith, September 04 2007:


I could not even get the screen to show the current region.
I even tried a few other Philips hacks, still no luck.
I suspect the fault lies with the remote controller or me!
I will again another time.



PostRegion code hack posted by Brenton Smith, September 06 2007:


I tried again later and found a slightly different way.
After power up and no disc showing, I entered 00009 then pressed the OK button, it came up with showing region zero.
I did not even have to open close the tray.
However I then did open and close anyway, then unplugged it from the wall. Replugged it and I was away with region free.



PostRegion code hack posted by riskman, February 29 2008:


Switch on (display shows no disc)
On remote control press
0086000 followed by
OK
Switch off using remote.
When you switch on again, DVD player is region free
(I found that this is all that is necessary - the other hack suggestions did nothing. eg 00009 etc)



PostRegion code hack posted by tony69, October 25 2008:


I tried the hack posted by riskman as it seemed simplest and it worked first time no problem. 1)power on (display shows no ''disc''. 2)press 0086000 then ok. 3)power off and back on with remote control and that should do it.



PostRegion code hack posted by Chartax, September 01 2009:


== ENSURE THERE IS NO DVD IN THE DVD TRAY!! ==

1 ) TURN ON THE DVD PLAYER
2 ) WAIT FOR THE "NO DISC" RESPONSE ON-SCREEN.
3 ) ON YOUR REMOTE CONTROL INPUT "00009".
4 ) THIS WILL DISPLAY YOUR REGION INFO (I.E. "REGION=2")
5 ) OPEN AND CLOSE THE DVD TRAY TO REFRESH THE MESSAGE.
6 ) ON YOUR REMOTE CONTROL INPUT "0086000".
7 ) THERE WILL BE NO RESPONSE FROM THE PLAYER.
8 ) OPEN AND CLOSE THE DVD TRAY TO BE SURE.
9 ) ON YOUR REMOTE CONTROL INPUT "00009".
10) IF IT SAYS "REGION=0" POWER ON AND OFF THE DVD-PLAYER WITH YOUR REMOTE.
11) IF IT DOES NOT SAY "REGION=0", TRY AGAIN.

Good luck and enjoy watching region-free!




1 DVD Hack hits, Showing 1 to 1 DVD Hacks
   

New hacks = New region code/hack comments since your last visit.
Search   Contact us   Privacy Policy   About   Advertise   Forum   RSS Feeds   Statistics   Software   

Site layout: Default Classic Blue

Affiliates: free-codecs.com

©1999-2022 videohelp.com