Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.

What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:


DVD Player Hacks Updated Add
Oritron DVD200

9 user region code comments

January 21, 2004 Post region code/hack comment
PostRegion code hack posted by B, July 02 2001:


The latest oritron dvd players have changed their codes for vcd and all region play.
Do the following to get the hidden Vcd menu.
Insert a music cd
Press
Press <5>
Press , the tray should stay closed.
Press <1>
Press
Press
You will now see a menu
Press <1> to enable vcd play

Older ORITRON DVD200
----------------------
TO PLAY VCD's (VideoCD's):

Place a CD in the player and close the drawer.
Using the remote control:
Press [STOP]
press [MENU]
press [9]
press [1-ALL] (repeat key)
press [OPEN] (open the drawer)
You will now see a new menu which will allow you to turn on VCD.




PostRegion code hack posted by K-P, July 31 2001:


FOR ORITRON DVD200
----------------------
TO PLAY VCD's (VideoCD's):

Place a CD in the player and close the drawer.
Using the remote control:
Press [STOP]
press [MENU]
press [9]
press [1-ALL] (repeat key)
press [OPEN] (open the drawer)
You will now see a new menu which will allow you to turn on VCD.

TO CHANGE REGION TO "ALL"
Set player with "NO DISC"

press "MENU" key
press "9" key
press "TRAY OPEN" key
press "5" key
press "MUTE" key
press "OK" key
press "EXIT" key







PostRegion code hack posted by K-P, July 31 2001:


FOR ORITRON DVD200
----------------------
TO PLAY VCD's (VideoCD's):

Place a CD in the player and close the drawer.
Using the remote control:
Press [STOP]
press [MENU]
press [9]
press [1-ALL] (repeat key)
press [OPEN] (open the drawer)
You will now see a new menu which will allow you to turn on VCD.

TO CHANGE REGION TO "ALL"
Set player with "NO DISC"

press "MENU" key
press "9" key
press "TRAY OPEN" key
press "5" key
press "MUTE" key
press "OK" key
press "EXIT" key







PostRegion code hack posted by Rick, September 02 2001:


Region code for DVD200 purchased Sept 2001 (firmware 005?)

Open tray
press MENU
Press 1
Press 6
Press 7

Menu appears - select specific region 1-6 or
Press MUTE for ALL regions :)

Only needs to be done once.



PostOther hack posted by Refracto, the Wonder Tech, September 11 2002:


To Play VCD's
Place CD in player (I used audio CD)

Use your remote control only!

press [STOP]

press [MENU]

press [9]

press [1-ALL] this is the repeat key

press [tray open button] this is the remote key
that looks like a triange
with the apex pointing up

A menu will appear that will allow you to turn on
the play VCD function

Now, to switch to Region ALL

with no disk in player, player on, open tray

use the remote and press [MENU]

then press [9]

press the tray open key on the remote

press the number [5]

Menu will pop up that says region 1 - 6

press the mute button (it looks like a speaker with
an X thru it)

This will change the region to all!

Press exit...ENJOY!



PostRegion code hack posted by chris, September 17 2002:


This is what worked for me with DVD200 bought in Summer 2002 (version 5 FW):

REGION CODE
press open
press MENU
Press 1
Press 6
Press 7

Menu appears - select specific region 1-6 or
Press MUTE to select ALL for region

VCD ENABLE
With audio CD loaded (don't know if this is required or not)
press MENU
press 5
press open
press 1
press INDEX MENU button (looks like a tabbed folder icon next to the repeat button)
press open (menu appears)
press 1 (to enable VCD)




PostRegion code hack posted by Catalin, November 16 2002:


I have figured out a secret combination of keys on the front panel of the unit:

switch on the DVD player while pressing the PLAY key (on the front panel). You will see that the unit is starting a sort of test with all kinds of messages being shown up on the display.I guess this also works for Oritron DVD 200, 600 and other similar DVD player based on the STI558 chip (or so). You could to the same thing while pressing both play and stop buttons and check what is happening. MAYBE SOMEBODY OUT THERE CAN FIGURE OUT HOW TO DISABLE ONCE END FOREVER THAT ANNOYING MACROVISION



PostRegion code posted by Dani, January 04 2003:


Hello,

i have not tested this trick, but i hope it will work.
Unfortunately it is in german, but that should be no problem, is it?

Thanks to Martin


Abgeschickt von Martin am 26 November, 2002 um 17:47:16:

So kann man beim Tevion DVD-200 den lästigen Macrovisionsschutz abschalten:

1. DVD einlegen
2. STOP drücken
3. INDEX drücken
4. MENU drücken
5. Danach 5, 9, 7 drücken und dann EXIT

Es erfolgt zwar keine erkennbare Bestätigung seitens des Players aber es funktioniert!

Dieser Code müsste auch mit dem LT 7989, Oritron DVD-1030, Oritron DVD-200 und Matsui DVD-125 funktionieren.





PostRegion code posted by Rondog, January 21 2004:


The easiest way I have been dealing with Macrovision, has been for about 5 years, with perfect success, is to buy a Video Stabilizer from an electronics store, or maybe even ebay. You run the video through that, and I have never had to worry about macrovision for years now. I have owned this since before DVD's and used it when copyiing VHS tapes I rented, and now I use it on the DVD player, with perfect results. I have to replace the 9 volt battery about every 2 years or so, but its so much easier, and works with all players.

Hope this helps.




1 DVD Hack hits, Showing 1 to 1 DVD Hacks
   

New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!
Search   Contact us   Privacy Policy   About   Advertise   Forum   RSS Feeds   Statistics   Software   

Site layout: Default Classic Blue

Affiliates: free-codecs.com

©1999-2024 videohelp.com