Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.

What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:

Try DVDFab and copy all Ultra HD Blu-rays and DVDs / remove Cinavia protection! Download free trial !

DVD Player Hacks Updated Add
Mustek DVD-V562

16 user region code comments

September 30, 2003 Post region code/hack comment
PostRegion code hack posted by Luis Brenes, January 21 2002:


Region code ALL

SETUP
VOLUME +
VOLUME -
VOLUME +
VOLUME -
KEY DOWN
KEY UP
or
KEY LEFT
KEY RIGHT

Search until on the top right corner apears Ver. 255 that means region free





PostRegion code hack posted by J°rgen, January 21 2002:


Mustek V562 Hack

Press Setup
Press the volume + and - keys alternating until you see "VER #" (# is your current Region code)
Use the Cursor keys to choose VER 255 (Region free)
Press Setup

Bogota-Colombia
South-America


------------------------------------------------
I KNOW THIS IS THE SAME TRICK AS ON THE V560s,
but i found this on another forum! SOMEONE TRY
IT and post back here whetever it worked or NOT!
------------------------------------------------



PostRegion code hack posted by jim, January 21 2002:


urn player on with no disk in drive.

press setup

alternate volume '+' and '-' on the remote until the menu disappears and you get ver 2 in the top right

then press the left or right arrow keys on your remote to scroll through the different regions untill you get to the one you want then simply press setup to save. select ver 225 to set to all regions. this will save you having to set it manualy every time you put a different region disk in but may not play the new double region locked DVDs on the market now. to play them you should set to the specific region




PostRegion code hack posted by alladin, January 25 2002:


Region code ALL

SETUP
VOLUME +
VOLUME -
VOLUME +
VOLUME -
KEY DOWN
KEY UP
or
KEY LEFT
KEY RIGHT

Search until on the top right corner apears Ver. 255 that means region free


worked for skymaster supervision 2200 (relabeled)



PostRegion code hack posted by itswork :D, January 28 2002:


1. Turn on the DVD player WITHOUT any disc in the tray.
2. When the display says "NO DISC" press...

SETUP - NEXT - STOP - PAUSE - PREV - NEXT

...quickly, in that order.

You should now see a menu called LOOPHOLES (if you don't try again, faster!)
3. In the LOOPHOLES-menu goto REGION-ID, and select "BY PASS". Macrovision should be set to OFF.

Your Mustek DVD V560 is now region-free!


Posted by Daniel Bj÷rklund reported 2001-10-10 08:32:59



PostRegion code hack posted by XPAT, April 03 2002:


Password - In my manual there does not appear a password, however after a few seconds of playing around i found out that the password is 9999 . This particular unit was subcontracted from Mustek to Selectron.



PostRegion code hack posted by BillyBigun, April 12 2002:


Mustek DVD V562 Region Hack.
Just done my V562 with this and works OK

Press Setup
Press next
Press previous
Press next
Press previous

Select region 255 using direction keys (Left or Right)

Press Setup again to exit and the region free feature is enabled.



PostRegion code hack posted by tinfolley, April 20 2002:


To make it multi region :
press:
Setup
volume +
volume -
volume +
volume -
Change the region code with < (255 means all the regions)





PostRegion code hack posted by AKF, April 27 2002:


Make sure there is no disc in the player, then press "setup" on your remote. Then
NEXT
PREVIOUS
NEXT
PREVIOUS

After that you'll see "ver #"in the top right corner of the screen. Now use the left and right buttons on your remote to switch regions. You can just set the right region (1,2, etc.) or choose ver 255, wich is region-free.
This hack is the only one that worked on my Mustek v562.



PostRegion code hack posted by Carlos Bluemoon Mendoza, April 29 2002:


1. Turn on the DVD player WITHOUT any disc in the tray.
2. When the display says "NO DISC" press
SETUP on the remote
3. And then NEXT-PREV-NEXT-PREV on the Player.
4. Set it to V.255
5. Enjoy



PostRegion code hack posted by PoppaPumP (Jan) from Berlin, May 09 2002:


I tried all of the hacks in the internet but no worked.

But then i found out how it works:

1. Switch on the best DVD Player of the world "Mustek DVD-V562"
2. Be sure, that there is no DVD in the best DVD Player of the world
3. Press "SETUP"
4. Press "NEXT"
5. Press "PREV"
6. Press "NEXT"
7. Press "PREV"
8. Now you will see in the upper right corner an little Menu. With UP an DOWN you can swith between the entrys and with LEFT and RIGHT you can change them
9. Change your Regioncode with LEFT or RIGHT to 255 and it will be REGIONCODE FREE (e.g. from 2 to 255)
10. Change the entrys 3001 and 4001 to 3000 and 4000, and Macrovision 3 and 4 will be turned off

Lots of Phun with the BEST REGIONCODE FREE DVD Player of the WOLRD,

PoppaPumP from BERLIN



PostRegion code hack posted by DAD, May 16 2002:


For Mustek DVD-V562 with Winbond-Cip
and newest Firmware on Remotecontrol
press Setup,Next,Prev.,Next,Prev.
A hidden Menue appears with Ver.X.
X is your Regioncode.
Set Ver.X to 255 with Up or Down Keys
and yor Mustek is Regionfree.
Press Setup to leave the Menue.



PostRegion code hack posted by Rinderteufel, June 25 2002:


Well, on my 562 the Regioncodefree-hack is the following:

On the RemoteControl:

Press: SETUP
VOLUME +
VOLUME -
VOLUME +
VOLUME -

then, in the upper left corner there will be "ver. 2" (the 2 is fo europe, but it will be whatever your region is), this can be changed to any number or 255 for all regions with the LEFT and RIGHT Curser-Keys on the remote.
If you press UP or DOWN there will be the number 4001, you can change this to 4000...
Same thing for the nuber 3001...

First I thought it would turn Macrovision off, but it is still active, so I don't know what it does...



PostRegion code posted by Turbohase, July 11 2002:


do it as follows:

1. press "SETUP"
2. press "NEXT"
3. press "PREV"
4. press "NEXT"
5. press "PREV"

you should see Ver2 or Ver255 (region code)

6. press "arrow up"
7. press "arrow left"

you should see 4000

8. press "arrow up"
9. press "arrow left" until you see 3000
10. press "SETUP"

Now your Macrovision Code is disabeld

Have Phun



PostRegion code hack posted by P Beavan, January 13 2003:


Bearing in mind how finnicky the remote is on this unit, I tried all these without sucess but if you press set up on the remote and when you are in the set up screen, quickly press "next Previous next previous" ON THE UNIT ITSELF AND NOT THE REMOTE, it works, then just use left right to change numbers for region.

Frosty




PostRegion code hack posted by ....., September 30 2003:


DIVX




1 DVD Hack hits, Showing 1 to 1 DVD Hacks
   

New hacks = New region code/hack comments since your last visit.
Search   Contact us   Privacy Policy   About   Advertise   Forum   RSS Feeds   Statistics   Software   

Site layout: Default Classic Blue

Affiliates: free-codecs.com

©1999-2021 videohelp.com