Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.

What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:


DVD Player Hacks Updated Add
Pioneer DV-565A-S 15 user region code/hacks October 08, 2004 Post region code/hack comment
Region code hack posted by gabo, September 11 2003:

Is it possible to hack (need to get rid of macrovision and also need region free)it by the remote? Donīt know anybody who would do it. PLZ help. Thanx.
gabo



Region code hack posted by Erhard Fritz, October 11 2003:

Freecode for Europa -Germany



Region code hack posted by Softail, December 13 2003:

Iīve used a Pronto 890 with the following Code:

0000 0067 0000 0044 0155 00ac 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0404 0155 00ac 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0404

After the automatic switch off you have to switch on manually ---> now itīs Codefree !!!



Region code hack posted by DaDo, December 27 2003:

Yes, it really works!! I just unlocked my new DVD565A and now it is regfree player. I tested only one american DVD Lords of the Rings and it goes! With NTSC signal and fullscreen! Wow. So Im going to buy some favourite americans DVDs.

Thanx!

Who still dosnt know:
1. I made that trasmitter with two LEDs and one resistor.
2. Unlock with computer.
3. It really offs and it was multiregion.

I think, that was someone from Pioneer research. And he sold that code. What do you think?

DaDo



Region code hack posted by Kristian, January 16 2004:

Category-TV
Button name-Enter
0000 0067 0000 0000
Button name-0
0000 0067 0000 0044 0155 00ac 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0404 0155 00ac 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0404
Button name-7
0000 0067 0000 0000
Button name-8
0000 0067 0000 0000
Button name-9
0000 0067 0000 0000
Button name-4
0000 0067 0000 0000
Button name-5
0000 0067 0000 0000
Button name-6
0000 0067 0000 0000
Button name-1
0000 0067 0000 0000
Button name-2
0000 0067 0000 0000
Button name-3
0000 0067 0000 0000
Button name-Channel up
0000 0067 0000 0000
Button name-Channel dn
0000 0067 0000 0000
Button name-Last
0000 0067 0000 0000
Button name-Volume up
0000 0067 0000 0000
Button name-Volume dn
0000 0067 0000 0000
Button name-Mute
0000 0067 0000 0000
Button name-Power
0000 0067 0000 0000
Button name-Favorite
0000 0067 0000 0000


You most use a handheld computer like palm zire to unlock this code!



Region code hack posted by Daniel, January 20 2004:

I could confirm that the remote hack of Kristian worked
perfectly. I used a Palm V and a fresh Omniremote V2.10

Worked with one try! Thanx a lot.



Region code hack posted by Terje, February 21 2004:

Hi.'Thanks to Kristian. Work great. Used a Palm Zire 21 with Omniremote. Work at once.
Can sombody tell me how to adjust the signal output on this player. I guess the standard is auto regarding Pal/NTSC.
When I trie to play ntsc it goes black. Its useless to go via vcr. Must be a way too set PAL as standard ??????



Other hack posted by Kristian, February 22 2004:

Hi Terje!

If you want too change the settings from auto mode too pal, you most first
hit your dvd off with the standby button on the dvd it self, after that you most push the button rewind forward end hold it down and than press down the stanby button to start the dvd player while you still are holding down the rewind forward button, then the display will show auto or pal or ntsc, repeat this too you get it right, do not use your remote for this only the buttons on the front off your dvd, or look in your manual page 73.

Good luck!

Kristian




Region code hack posted by Fuji, March 15 2004:

Is it posable to hack this player with the remote. If not can some one tell me what pronto 890 is and what do you do with all these codes. I'm a newbee to this. Ta Fuji.



Other hack posted by frente, March 20 2004:

Can Kristian's hack be applied with IPAQ 4150? Which software (possibly freeware) I can use?



Region code hack posted by Fernando, March 25 2004:

tytyyt



Region code hack posted by sdspecy, May 23 2004:

No luck with my 565A-S. Bought in EU, 2 months ago.
After first try unit went off, but there were no changes.
Now it won't even go off again.
And OmniRemote 2.10 keeps changing imported code due to the different "OR's data rate". Exported code is completely messed up.

Any thoughts?
And where to get that ASCII codes??? (Pioneer directly?)

Thx!

(I think I'm going to give WinLIRC a try)



Region code hack posted by RetroSpeC, June 10 2004:

To sdspecy and all others with a Pioneer DVD player/recorder or home cinema.

i Just wanna inform you regarding firmware modification on Pioneer's dvd players/recorders.

When applying firmware to make the unit region free you actually perform a downgrade of the firmware. This firmware is the initially firmware programmed at the factory line, before the the specific region software is installed when is it determined where in the world the unit will be shipped to. And one ohter thing if you have problems after "downgrade" it can be updated if you send it to Pioneer's service department, however it will be treated as an out of warranty case and you have to pay for the "upgrade".



Other hack posted by pdavit, August 29 2004:

Can the codes posted here be accepted by a remote other than a PDA computer or a costly Pronto remote? Is there a cheap alternative remote that can accept those codes and if yes can we have a small list of those compatible to the above codes remotes? Thanks!





Region code hack posted by sdspecy, October 08 2004:

Sorry about my previous post, I was wrong. Like E. Fritz said above, looks like euro versions are codefree.

I sent my 565a to service and they said it's already opend for all regions (silly me). When I ask them about failure I have done, they told me everything is OK ??? (couldn't belive it, but it was true).

Looks like I did nothing to the unit (still strange). Now it works flawlessly. Later it proved that there were some DVDs, which were poorly burned (directly with Nero); all ohers were readable.

regards,
david




1 DVD Hack hits, Showing 1 to 1 DVD Hacks
 - 

New hacks = New region code/hack comments since your last visit.
Search   Contact us   About   Advertise   Forum   RSS Feeds   Statistics   Tools   

Site layout: Default Classic Blue

Affiliates: codecs.com   VSO Software

©1999-2014 videohelp.com