Software » Video Editors » TMPGEnc Video Mastering Works 7.0.30.33

Version 7.0.30.33 - November 2, 2023

Corrections Fixed: The rate control mode "VBR (Constant Quantization)" for the NVENC encoder did not work correctly.
Other corrections.


Version 7.0.29.32 - October 27, 2023

Improvements Improved: There are now seven performance presets available for the NVENC encoder.
Improved: Improved to suppress the the degradation of image quality as much as possible when the slice setting is set to 2 or higher on the x265 encoder.
* This improvement may result in a slight reduction in encoding speed compared to previous versions.
Changed: The Windows system sound is now disabled when deleting a job in TMPGEnc Movie Plug-in Commercial Candidates Detector.
Corrections Fixed: The NVENC encoder did not function properly in an environment with NVIDIA GeForce driver version 545.84 or later installed.
Fixed: Could not import certain WebM files recorded on specific devices.
Fixed: The high-speed thumbnail scrolling was not working smoothly with certain H.264/AVC files.
Fixed: Occasionally the MPEG file reader deadlocked when an error occurred while importing a file.
Fixed: Occasionally the x265 encoder would fail during export when using 2 Pass and Slice settings of 7 or above.
Other corrections.


Version 7.0.28.31 - June 27, 2023

Corrections Fixed: An error occurred at the start of output when using a specific external codec with 10 bit setting for the AVI encoder.
Other corrections.


Version 7.0.27.30 - March 9, 2023

Corrections Fixed: The AMD Media SDK decoder did not work correctly with the Adrenalin 23.2.1 or later driver.
Fixed: Playback stopped when clicking the Add Keyframe/Add Clip Split Point button during video playback in the Cut editing window.
Other corrections.


Version 7.0.26.29 - January 19, 2023

Improvements Improved: Measures were taken to address NVENC encoder field processing problems in NVIDIA driver Ver.520 and later.
Improved: When importing an MP4/MKV file with the MPEG File Reader, improved to import audio data as normally as possible even if it has an invalid AudioSpecificConfig.
Corrections Fixed: The current position of the high-speed thumbnails caused misalignment when editing an H.265/HEVC clip with the NVDEC decoder.
Fixed: Occasionally Set and Release operation of the Keyframe/Clip Split button in the Cut editing window did not work correctly when clicking the button on a keyframe or a clip split point.
Fixed: Occasionally the detection of stream structure did not work correctly when importing an MP4 or MOV file which contains monaural audio stream.
Fixed: The supported Intel Media SDK Hardware encoder was not available in certain Intel CPU environments.
Fixed: Could not correctly decode a Canon Cinema Raw 8K 23.976 fps video stream.
Fixed: The application hung up when importing a TMPGEnc Video Mastering Works 6 filter template with the Timelapse placed below the Picture Resize.
Other corrections.


Version 7.0.25.28 - March 18, 2022

Improvements Improved: The maximum number of subtitles that can be entered in the Subtitles filter changed to 99999.
Corrections Fixed: The AMD Media SDK encoder for H.265/HEVC output failed with the Adrenalin 21.12.1 or later driver version with an RDNA2 graphics board.
Fixed: The Metadata applied in the MP4 output settings was not displayed correctly in a supported player.
Other corrections.


Version 7.0.24.27 - December 14, 2021

Improvements Improved: The AMD Media SDK encoder now supports H.265/HEVC 8K encoding in a Radeon RDNA 2 architecture environment.
Corrections Fixed: The Intel Media SDK Hardware decoder for H.265/HEVC was not available in Intel UHD Graphics 770 environments.
Fixed: Occasionally noise occurred in the output audio when applying the Volume Uniformization with the Loudness in the Volume Adjustment filter.
Fixed: Occasionally the length or overlapping order of the clips was changed when dragging multiple clips while selecting them in Timeline mode.
Fixed: Occasionally the encoding time became gradually slower when outputting from a large number of still images at 1fps in the MP4 output.
Fixed: Occasionally some decoded frames were not reflected in the output video when outputting from 1fps source setting to video at 1fps with the x264 encoder.
Fixed: Could not import certain WebM files that have undefined cluster element length.
Fixed: MPEG-PS container files could not be imported into the MPEG Tool.
Fixed: Occasionally some parts of the clip editing window did not display correctly in an environment with 125% DPI.
Other corrections.


Version 7.0.23.25 - August 13, 2021

Improvements Improved: Optimized the mouse moving process for the 3-Way wheel in the Color Correction filter.
Corrections Fixed: The Intel Media SDK encoder for MPEG-2 did not work correctly in version.7.0.22.24.
Fixed: The AMD Media SDK encoder for H.265/HEVC output occasionally failed with the Adrenalin 21.6.1 or later driver version with an RDNA or later Radeon graphics board.
Other corrections.


Version 7.0.22.24 - July 13, 2021

Corrections Fixed: The output video would be corrupted when outputting an H.265/HEVC Main 10 video with the Intel Media SDK Hardware encoder on an Intel Ice Lake Core or later CPU environment.
Other corrections.


Version 7.0.21.23 - May 20, 2021

Corrections Fixed: A floating-point error occurred when switching to the filter editing window in certain Intel CPU and driver environments.
Other corrections.
Other Supports IPv6 license activation.


Version 7.0.20.22 - April 28, 2021

Corrections Fixed: Occasionally a floating-point error occurred when finishing cut editing in certain Intel CPU and driver environments.
Fixed: Occasionally output speed gradually decreased when outputting a project which had the audio noise reduction filter applied to the Windows Media Video format.
Fixed: The video was not outputted correctly depending on the environment when outputting a Windows Media Video file with the interlaced option.
Fixed: The "Clip Naming Convention" option was reset unintentionally when replacing an audio file via the TS analyzer from the Clip Properties.
Fixed: Occasionally an error occurred when outputting a project in which the size exceeds 2GB.
Fixed: The Add button in the filter stock was occasionally displayed incorrectly depending on the monitor DPI setting.
Fixed: The clip duration was not applied correctly when moving a clip which had the "Remove unselected range when splitting a clip" option applied from Timeline-mode to Normal mode.
Other corrections.


Version 7.0.19.21 - January 26, 2021

New Now supports H.265/HEVC hardware decoding utilizing the AMD Media SDK encoder.
Corrections Fixed: Could not import certain WebM files via the MPEG file reader.
Fixed: Occasionally the sort function, "Sort by Date Taken," in the slideshow window did not work correctly for specific files.
Fixed: Occasionally the "Delete In/Out Points Range then Close Gaps" option in the Timeline mode did not work correctly for the subtitles range.
Fixed: The created thumbnail image was not outputted correctly when using the thumbnail image creation option for output.
Other corrections.


Version 7.0.18.20 - November 25, 2020

Improved Improved: Newly supports importing a RAW movie file (CRM) shot by Canon "EOS R5".
Corrections Fixed: The VBR (Constant Quantization) QP option for the B frame of the NVENC H.265/HEVC encoder could not be used even in a supported environment.
Fixed: The Intel Media SDK Hardware for H/265/HEVC output was not available in certain Intel Tiger Lake CPU environments.
Other corrections.


Version 7.0.17.19 - October 4, 2020

Improved Improved: Now supports H.265/HEVC Main 4:2:2 10 Intra profile file import.
Improved: Could not correctly import an audio stream where the size of DecoderConfigDescriptor stored in the MP4 audio track is incorrect via the MPEG Reader.
Corrections Fixed: Occasionally could not decode video correctly via the NVDEC Decoder in an NVIDIA GeForce driver ver.456.38 or newer installed environment.
Fixed: When "Display using Output Format" is set in the Preview settings, and the resolution is different between the clip and the output settings, occasionally the Interpolation function of the Mask filter did not perform correctly.
Fixed: Numerical differences occurred in gamma conversion at low luminance area at the output when the color management settings were set to the BT.709 Gamma 2.4 color space.
Other corrections.


Version 7.0.16.18 - August 23, 2020

New Newly added the [Scale Layout Box to Text Size] option for the Text function in Timeline mode.
The Layout Box automatically enlarges or shrinks according to the whole size of the Text.
* This option is enabled as default in a new project. If you want to use the previous behavior, check off this option.
Newly added the [Use Image As Is] option for the Type of Effect in Mask filter. An image which is specified in the Layer Style will be displayed as is as a mask.
Improved Improved: Changed the Gamma value used for the color space of ITU-R BT.709 to 2.4 when the Color Management settings are enabled.
This value can be changed in the Preferences > Global Settings > Color Management Advanced Settings.
Improved: Newly added the [Adjust Output Settings Using Source Information] option to the Custom Output Template window in the Output Format Selection.
Improved: Changed the maximum size of the Video Resize filter to 8192 x 8192.
Improved: Newly added keyboard shortcuts for the displayed range (Orange/Blue) for the Source Monitor in Timeline mode.
CTRL+[Right] - Next range
CTRL+[Left] - Previous range
Corrections Fixed: The Intel Media SDK Hardware for MPEG-2 Decoder did not work correctly in a Skylake or later Intel CPU environment with a specific driver version.
Fixed: Occasionally the output data did not correctly reflect the output settings when using the AMD Media SDK encoder in a Navi core Radeon graphic board environment.
Fixed: In Timeline mode, occasionally some keyframes were not reflected from a clip that was separated in the timeline when using the [Copy Clip Keyframes to Timeline] option.
Fixed: When the parameter of the Transform function changed in the Timeline mode, occasionally the related key point of the Transform disappeared unexpectedly.
Fixed: The [Delete In/Out Points Range then Close Gaps] option did not work correctly on gaps between audio-only clips in the Timeline mode.
Fixed: Occasionally the first frame of the second or later output file would be deleted if the frame rate between the source clip and the output settings were different.
Fixed: The minimum bitrate value could not be changed when the output video stream is set as MPEG-1 or MPEG-2 Video in the output settings.
Fixed: The color conversion for output did not work correctly when selecting the JPEG format in the Sequential Still Picture Files Output settings if the color management settings were enabled.
Fixed: Occasionally the [Copy Selected Titles to Hard Disk Drive] option in the Source Wizard did not work correctly when importing an ISO file.
Fixed: The input caret forcedly moved to the beginning when pasting a string containing a linefeed code in the edit forms.
Fixed: Thumbnails of the Fast Thumbnail Preview in the Filter window did not reflect the results correctly when applying the Crop filter.
Fixed: The time-axis based viewpoint movement using the key point of the Panorama Expand filter was not reflected properly at output when using a still image source clip.
OtherChanged the compatibility of the project, filter template and asset files. Along with this correction, older versions cannot load these files saved with this version or later.
Other corrections.


Version 7.0.15.17 - March 31, 2020

Corrections Fixed: NVENC could not be selected for the H.264/AVC encoder in an NVIDIA Geforce Driver Ver.445.75 install environment.
Fixed: Stopped playing unintentionally when clicking the Clip Split button while playing in the Cut editing window.
Fixed: Occasionally selecting or doing other operations for a clip did not work in the Timeline mode when returning from the Output settings or Encode stage if the preview window was undocked.
Fixed: A CUDA error occurred when operating a 3-Way wheel in the Color Correction filter depending on the environment.
Fixed: Could not correctly import an audio stream contained in a Motion JPEG AVI file which was recorded on certain digital cameras.
Other corrections.


Version 7.0.14.16 - February 12, 2020

New Newly added five different kinds of pre-installed assets.
Improved Improved: Enhanced bitrate selection values for the Opus audio output.
Improved: Occasionally some decoded video frames were duplicated when importing certain invalid H.264/AVC video streams recorded on Insta360 EVO.
CorrectionsFixed: The number of loop counts was not applied correctly to its duration when importing an animation GIF or PNG file.
Fixed: The data rate settings were not reflected correctly to an output file when using the Intel Indeo video 5 codec in the AVI output settings.
Fixed: The information of the audio duration was not described correctly into the container when outputting an MP4 file.
Fixed: Occasionally outputted images became coarse when outputting a BT.2020 HLG color profile video file in an SSE4.1 run environment.
Fixed: Did not covert the color space of a clip correctly when importing a clip of the BT.2020 HLG color profile into the working color space where it was set in BT.2020 PQ.
Fixed: A superfluous "TMPGEncVMW7OutProcess.exe" launched when opening a clip editing window in which the VST filter was added.
Other corrections.


Version 7.0.13.15 - November 12, 2019

New Newly added eleven different kinds of pre-installed assets.
Improved The performance presets are available for the NVENC encoder.
* Please note that it shows little change depending on the source file.
Corrections Fixed: When using Windows Media Audio 10 Professional for the Windows Media Audio encoder, an error occurred in 48Hz and 5.1ch or above formats when starting the output.
Fixed: The NVENC encoder was not available after launching the application during the maximum instances of the NVENC encoder working on.
Fixed: Incorrectly recognized certain image files as an audio file.
Fixed: Could not correctly play each preview when the format of the playback device in Windows was set in 200 kHz or higher.
* Playback is possible, yet the sound is muted due to the specification of Windows.
Fixed: The Post-Output Process option at the Encode stage did not link correctly between one which exists in the right-click menu and another which exists in the bottom of the window.
Other corrections.


Version 7.0.12.14 - August 4, 2019

Improved Improved: The chunk order of the output Linear PCM audio has been changed to avoid an error which occurred while outputting a Blu-ray project in Encore CS6.
Corrections Fixed: Occasionally the output pictures became green when outputting by a specific resize algorithm with CUDA filtering.
Fixed: Could not save the opacity effect setting correctly when saving a subtitles file in the Subtitles filter.
Fixed: An error occurred when importing a LUT file if Window's decimal point is set as "Comma".
Fixed: Could not launch TMPGEnc Movie Plug-in Commercial Candidates Detector correctly in an environment other than that of DPI 100%.
Fixed: The chapters of an outputted MP4 file did not work correctly in specific players on macOS.
Other corrections.


Version 7.0.11.12 - June 25, 2019

Improved Improved: When playing an MPEG-2 file with the MPEG File Reader, improved to play audio or video data as normally as possible even if it has corrupted data.
Corrections Fixed: An error occurred if the CUDA utilization rate reached over a certain amount while outputting when a blur-contained filter was applied and the output aspect ratio was set as display 4:3.
Other corrections.


TMPGEnc Video Mastering Works 7.0.9.10 Preview

Pegasys Inc., the company that takes video to the next level, announces the upcoming release of TMPGEnc Video Mastering Works 7, the successor to TMPGEnc Video Mastering Works 6, on June 25 (PST), 2019. TMPGEnc Video Mastering Works 7 features support for many input and output formats, detailed parameter settings, fast and precise cut-editing, video format conversion, compression, material creation, and much more. This is the high-quality encoding choice of video enthusiasts - this is TMPGEnc Video Mastering Works 7.

This version supports previewing, editing and outputting in the HDR (High Dynamic Range)* color space, and also supports H.265/HEVC 8K 10 bit 4:2:2 output. This allows the user to import footage recorded by HDR cameras, then edit and export them with the full range of vividness captured by the camera. Furthermore, this version newly features the LUT (Lookup Table) application, 3-way Color Correction and more options that are specialized for color grading. Thanks to user feedback, all functions within the editing interfaces have been improved to enhance the convenience and efficiency of the editing workflow. Users can get even more creative with new animation and karaoke text functions, and improved and accelerated filters.

TMPGEnc Video Mastering Works 7 advances the concept of the ultimate all-in-one encoding solution, allowing users to experience the latest innovations with the flexibility they require.

* PQ and HLG supported.

Main New Features

Enhanced Input and Output Formats.
Supports 8K resolution output in the H.264/AVC and the VP9 formats in addition to the H.265/HEVC format.

Canon Cinema Raw file Input Support.

Apple ProRes Stream Import Support.

H.265/HEVC 10 bit 4:2:2 Input and Output Support.

WebM/MKV VP9 Output Support.

Opus Audio Output Support.

GoPro Cineform® Output Support.

Animation GIF/PNG Output Support.

More formats newly added to the Sequential Still Picture Files Output.

Supports Log Curves of Major Cameras.

PID Settings Support for MPEG-TS Container.

New HDR Editing and Outputting Support Features.
Supports Real-Time Switching of the HDR Display.

Working Color Space is Available - Color Management Function.

LUT (Lookup Table) Application Support.

Possible to Simply Setup the Output Color Profile.

HDR Metadata Output Support.

HDR Enhanced Color Correction Filter.

Linking with TMPGEnc Series Software Function.

More Sophisticated Editing Functions and Interface.
Timecode Display Editing Support.

Supports Project File Saving on Clip-Editing Window.

Project Recovering Function Installed.

Enhanced the Undo/Redo Adopted Range..

QR Code Clip Creation.

Title/Multi Stream Analyzer - Post-application supported.

Newly added Easing function to many animation effects like transition, transform, etc.

Normal Mode Has Become Even Easier to Use.
Output Clip Selection Support.

Multiple Clips Grouping Support.

Supports Audio Channel and Aspect Ratio Change via Clip Properties.

Newly Evolved Cut Editing Interface.
Faster Enhanced Drag Seeking. Even Faster with Index for Seeking.

Quick Cut Function - Instantly Cut at the Range Set.

Displays Current Frame Information in Real-time.

Player Controller Undocking Support.

Position Change of the Player Control Buttons Support.

Further Added and Enhanced Filters
Video Stabilizer Filter Newly Implemented.

Lens Correction Filter Newly Implemented.

Motion Tracking on the Mask Filter.

Frame Interpolation Filter Newly Implemented.

Glitch Noise Filter Newly Implemented.

Newly Added Loudness Standard to the Normalization Method for the Audio Adjustment Filter.

Audio Compressor Filter Newly Implemented.

Little Planet Video Creation Support.

Increase Creativity - Enhanced Timeline Editing Mode.
Newly Implemented Crop Mode on Preview.

Text with Animation Function Newly Implemented.

Karaoke Text Function Newly Implemented.

Source Monitor Function.

Newly Added Clip Properties/File History Functions.

Pre-Installed Assets.

More Increased Abilities - Output Settings.
Custom Aspect Ratio Support.

Vertical Video Settings Support.

Direct Access to the Output Preview.

Encode Log Export Function.

And more...

For more information, visit the TMPGEnc Video Mastering Works 7 webpage: http://tmpgenc.pegasys-inc.com/en/product/tvmw7.html


Version 6.2.10.37 - December 14, 2018
Corrections Fixed: Intel Media SDK functions did not work correctly in some environments where Intel Graphics Driver for Windows 10 ver.25.20.100.6444 was installed.


Version 6.2.9.36 - September 11, 2018
Improved Improved: Supports importing Dolby Digital Plus audio which is multiplexed by the ATSC standard into a TS container.
Corrections Fixed: Occasionally selecting a clip by using the keyboard cursor in the Normal mode edit window did not work correctly.
Fixed: Occasionally an error occurred depending on the audio channel setting of a file when importing an MXF file which was created by Avid Media Composer.
Other corrections.


Version 6.2.8.35 - April 24, 2018
Corrections Fixed: Some parts of the layout of the application could not be displayed correctly in an environment where the DPI size setting was set to something other than 100%.
Fixed: During Timeline mode editing, occasionally a gap occurred when the [Bring all clips in this layer to the beginning] option was used.
Fixed: Occasionally the AMD Media SDK H.264 encoder could not output the framerate correctly depending on the output settings in an AMD Ryzen 2000 CPU series environment.
Other corrections.


Version 6.2.7.34 - April 1, 2018
Corrections Fixed: An error occurred when utilizing the AMD Media SDK H.264 encoder with an AMD Ryzen 2000 CPU series.
Fixed: Failed to launch in an environment which the [Force randomization for images] option of the Exploit Protection was enabled in a Windows 10 environment.
Fixed: During Timeline mode editing, occasionally a keypoint for the transform did not work correctly depending on the Start Time in the Source setting of the clip.
Fixed: During Timeline mode editing, occasionally adjusted clips overlapped 1 frame when the [Bring all clips in this layer to the beginning] option was used.
Fixed: During Timeline mode editing, occasionally the range of video of which the Time Remap was applied did not display correctly when the Start Time in Source setting of the clip was changed.
Fixed: Occasionally the layout selection list of the text editing window of the Subtitle filter was not displayed correctly depending on the mouse scroll settings.
Fixed: Occasionally the performance of opening or closing the clip editing window became slower when a VST plug-in was registered in the application.
Other corrections.


Version 6.2.6.33 - December 4, 2017
Improved Improved: Outputted H.265/HEVC files can now be played on MacOS High Sierra/iOS 11.
Improved: Improved not to insert the interpolation frame into the header of the output file when an imported source file's frame rate does not conform to the NTSC/PAL standard such as 29970/1000 or 23976/1000, etc.
* The first position of the interpolation frame places at 500000th frames when an imported source file's frame rate is 29.97fps (29970/1000) and output frame rate is 29.97fps (30000/1001), or an imported source file's frame rate is 23.976fps (23976/1000) and output frame rate is 23.976fps (24000/1001).
Corrections Fixed: The CUDA function could not be used when an invalid value was set in the CUDADevice data of the registry.
Fixed: Occasionally a peculiar judder occurred in the output video when outputting a H.265/HEVC video using the NVENC encoder with 10 bit depth color.
Fixed: During Timeline mode editing, occasionally a keypoint for the transform was added unintentionally or the setting was not reflected when the Start Time in the Source of the clip had been changed.
Other corrections.


Version 6.2.5.32 - September 28, 2017
Corrections Fixed: The fade effects for the subtitles in the split clips other than the header clip could not be performed correctly when splitting a clip which has the fade effects for the subtitles and the subtitle text was set to the end of the clip.
Fixed: Character corruption occurred for the chapter name when importing a MOV or MP4 file which was exported by Final Cut Pro X.
Fixed: An error occurred when importing a FLV(H.264) file which contains several Stream IDs.
Other corrections.


Version 6.2.4.31 - August 29, 2017
Corrections Fixed: The AMD Media SDK H.265/HEVC encoder was not available in a Crimson ReLive Edition 17.7.2 or later driver version environment.


Version 6.2.3.30 - August 24, 2017
New Now supports H.265/HEVC hardware encoding utilizing the AMD Media SDK encoder.
* This function requires a supported GPU (Polaris core generation) and a supported driver installed in the environment.
Now the YUV Full Range setting is available for the NVENC and Intel Media encoder's video settings.
Now the YUV Color Space Matrix Coefficients setting is available for the NVENC and Intel Media encoder's video settings.
Now supports importation of IMX MXF files.
Improved Improved to reduce noise which occasionally occurred at clip connection points when applying the Audio Pitch Shift filter.
Added the Previously Outputted Project to the Open Recent Project list in the Option of the Main window.
CorrectionsFixed: Could not set the Level 4.2 option in the H.264/AVC encode settings when using the Intel Media SDK in a SandyBridge/Ivy CPU core environment.
Fixed: Occasionally an error occurred depending on the audio bitrate settings during the encoding of a DivX HEVC file.
Fixed: A frame of the end of the transition effect range was lacked.
Fixed: The accelerator option of the Subtitle Stream settings in the Clip Properties did not work correctly.
Fixed: Did not sort the imported text correctly in chronological order when importing the Subtitle filter settings from a TMPGEnc Video Mastering Works 5 project.
Fixed: Some gaps occurred for the Background color depending on the length of ruby text in the Subtitle filter settings.
Fixed: An error occurred when inserting a higher value to the {fs} tag in the Subtitle filter settings.
Fixed: The Background was wrongly adjusted to 0.02% when importing a subtitle file which set the size to 0%.
Fixed: The deleted range became a full mosaic when the mask range in the Timeline Mode window was deleted.
Fixed: The current Post-Output Process setting display was hidden by the Output Preview when the Post-Output Process setting was set.
Fixed: A warning dialog window appeared when launching the application in GeForce GM108 and GP108 dai GPU environments in spite of the fact that these GPUs can not use the NVENC encoder.
Fixed: Occasionally the application could not respond immediately when applying the Time-Remap filter to a split clip depending on the speed setting.
Other corrections.


Version 6.2.2.29 - March 14, 2017
Corrections Fixed: An error occurred when adding keyframes to a TS analyzed clip with the "Insert keyframes to the nearest I frames when possible" option by the Advanced Keyframe Tool.


Version 6.2.1.28 - March 7, 2017
Corrections Fixed: An error occurred when clicking the Expander buttons in the Advanced settings of the MPEG File Output.
Fixed: The Guide line snap function of the Timeline Preview window did not work correctly.
Fixed: An error occurred when the "Post-Output Process" of the main application and Batch Encode Tool was set to something other than "None" after the output completion.
Fixed: Could not recognize the file size correctly when importing a RIFF format WAV file where the size exceeds 4GB.
Fixed: Could not import specific DPX files which have a 0xffffffff value defined as the header size.
Other corrections.


Version 6.2.0.27 - February 28, 2017

New Supports the auxiliary controller, "TMPGEnc Smart Tap Controller ". This controller allows you to control the cut-editing operations of TMPGEnc Video Mastering Works 6 from your iPhone or iPad.
Improved the Panorama Expand filter's functions.
- Newly added Samsung Gear 360 as a supported device.
- Displays the 3D positions of the sphere in the preview.
Now supports importation of MXF container files. Also supports analyzing for multiple streams in a container and audio channel map editing, which helps you import videos more easily.
Now supports H.265/HEVC Main 10 hardware encoding utilizing Intel Media SDK (QSV).
* This function requires an Intel Kabylake core CPU and supported driver-installed environment.
Now supports H.265/HEVC Main 10 hardware encoding utilizing the NVENC enocder.
* This function requires a 1000-series or later GPU (Pascal core generation) and supported driver installed environment.
Now supports importation of DPX format image files.


Version 6.1.5.26 - May 23, 2016

New Added the aspect ratio and video format settings to the AMD Media SDK encoder output settings.
Now supports High Tier for NVENC encoder supported profiles in the H.265/HEVC output settings.
Improved Improved: x265 encoder updated. Also, added and revised some parameters of the x265 encoder in the H.265/HEVC advanced output settings.
Corrections Fixed: In the Diorama filter, the focus range could not be changed by using the guideline of the preview when the blur angle was set to 90 or 270 degrees.
Fixed: Could not display the transpaparent range correctly of the Mask filter when selecting 24 fps mode in the Deinterlace filter.
Fixed: Misdetected dual monaural audio channel as stereo channel when importing a file via the TS title selection or the Batch Filter Tool.
Fixed: Occasionally could not playback audio correctly when importing an MKV file which contains certain FLAC audio streams.
Fixed: The content of the layout settings changed to that of Layout 1 unintentionally when clicking the layout list in the Layout Edit window of the Subtitles filter.
Fixed: Occasionally an exception 0xc0000008 error occurred during encoding by the x265 encoder.
Fixed: Occasionally the application would hang up when importing a file which was larger than a fixed resolution while using the Intel Media SDK H.265/HEVC Hardware decoder.
Fixed: Could not describe the number of frames in an MKV container correctly when outputting an MKV file which contained a H.265/HEVC stream by the Intel Media SDK Hardware encoder.
Fixed: When importing an output template with the x265 encoder settings which was created by version 6.0.7.9 or older, some options of the advanced output settings would be disabled.
Other Other corrections.


Version 6.1.4.25 - April 26, 2016

Corrections Fixed: In the subtitle filter window, the width of the subtitle number display column could not be changed, which made the subtitle number unreadable depending on the environment.
Fixed: Occasionally the application was shut down when applying the [All above] option for adding a subtitle of the Templates menu in the subtitle filter window.
Fixed: Fixed to display the error dialog so that you can recognize in advance when checking a title which is copy protected and unreadable content in the DVD/BDMV/BDAV title selection window.
Fixed: The clip naming method list in the Preferences was duplicated every time the [Reset to Default] button was clicked.
OtherOther corrections.


Version 6.1.3.24 - February 11, 2016

New Now supports retrieving "genre" in the MP3 ID3 tag.
Now supports importing the MP3 ID3v2.2.0 tag.
Corrections Fixed: Outputted a MP2 audio stream even if MP3 audio was set as the output audio stream in the MPEG file output (including MP4, MKV and FLV).
Fixed: Failed to launch in an environment which the Air Display driver was installed.
Fixed: Could not export the correct position of keyframes when Deinterlace filter – "24 fps" was set.


Version 6.1.2.23 - February 4, 2016

Corrections Fixed: Occasionally the application failed to launch when the onboard graphics did not connect with a display in an Intel HD Graphics 4xxx series environment.
Fixed: Could not keep the extension settings in the Preferences after the application restarts.
Fixed: Could not export the correct position of keyframes when Deinterlace filter - Deinterlace Always (Double Framerate) was set.
Other Other corrections.


Version 6.1.1.22 - February 1, 2016

Corrections Fixed: Occasionally the NVENC encoder exported OpenGOP H.264/AVC files depending on an environment which might cause some problems when seeking.
Fixed: Occasionally the MPEG reader could not import the duration correctly when importing certain audio streams which have an unnecessary date in the header.
Fixed: An error occurred when splitting a clip in the Clip editing window during the Time-line mode.


Version 6.1.0.21 - January 31, 2016

New Now supports H.265/HEVC hardware decoding and encoding utilizing Intel Media SDK (QSV).
* This function requires a supported Intel CPU and driver installed environment.
Now supports H.264/AVC hardware decoding(UVD) and encoding(VCE) on an AMD supported graphics board.
* This function requires a supported AMD graphics board and driver installed environment.
Now supports H.265/HEVC hardware encoding utilizing high speed hardware encoder NVENC.
* This function requires a supported NVIDIA graphics board and driver installed environment.
Now supports H.265/HEVC hardware high speed decoding utilizing CUDA.
* This function requires a supported NVIDIA graphics board and driver installed environment.
Newly added RICOH THETA S as a supported device to the Panorama Expand filter.
Supports up to High Intra 4:4:4 for H.264/AVC importation.
* Only for the standard decoder.
Added High and 422 profiles to the output settings of the MPEG-2 standard encoder. Also supports importing files with the profiles.
Added ITU-R BT.2020 Non-Constant to the YUV Color Space Matrix Coefficients setting in the H.265/HEVC output settings.
Added "SMPTE ST 428-1" and "SMPTE ST 2084 10/12/14/16bit" to the YUV Color Space settings in the H.264/AVC output settings.
Added YUV Color Space settings to the H.264/AVC output settings when the Intel Media SDK Hardware is set to the encoder.


Version 6.0.7.19 - August 31, 2015

Corrections Fixed: In Windows 8 or later environments, an invalid pointer error occurred when dragging a file onto the Source Wizard window.
Fixed: The commercial candidates detection did not work in the Trial version.
Other corrections.


Version 6.0.7.18 - August 20, 2015

New Now supports retrieving the built-in cover art and meta data with MP4, MOV, FLAC, MKV and MP3 containers.
Improved Improved: Supports directly importing ISO files on Windows 7 environment. In a Windows 7 environment, the direct ISO image file importation requires ImDisk Virtual Disk Driver which is packaged with the application. A confirmation dialog will appear in order to install ImDisk Virtual Disk Driver when an ISO image file is imported for the first time. The ISO image file importation cannot be used when the driver is not installed.

ImDisk Virtual Disk Driver: Copyright (C) 2004-2015 Olof Lagerkvist. http://www.ltr-data.se
Improved: x264 encoder updated.
Improved: Supports importation for high-bit depth (up to 32bit) image files. * Internal processing is 12bit. * Uses 8bit processing depends on a video filter.
Corrections Fixed: Occasionally an invalid sample format error occurred when applying a filter template from TMPGEnc 4.0 Xpress by certain procedures.
Fixed: Occasionally flickering pixels occur in the output video when applying the High-Precision Deinterlace filter method with the CUDA acceleration.
Fixed: In the subtitle editing window including Time-line mode, occasionally the start time, duration and end time did not work correctly.
Fixed: Occasionally a different deinterlace method appeared when loading a filter template or project which was created by 6.0.4.14 or prior version and contains deinterlace filter - 24 fps mode.
Fixed: In the Time-line mode, when setting the transition of a clip to "none", the video of other clips disappeared from the Time-line.
Fixed: When replacing the audio by using the TS analysis mode in the clip properties window, the video source was also replaced with the audio source.
Fixed: When using the NVENC encoder for H.264/AVC output, the “Number of Slices” setting in the Advanced settings was not reflected to the output file.
Fixed: When using the NVENC encoder for H.264/AVC output, the “Constrained Intra prediction” setting was not reflected to the output file even if the setting was enabled.
Fixed: Occasionally, sound skipping occurred when importing certain FLAC files.
Fixed: Occasionally the current seek point returned to the first frame when moving to the Cut Edit window from the Filter window in the Clip editing window.
Other Changed the compatibility of the project file. Along with this correction, older versions cannot load project files saved with this version or later.
Other corrections.


Version 6.0.6.17 - July 29, 2015

Fixed Fixed: Could not output the correct name when the output file name which was set in the Encode stage contains a period.
Other Now officially supports Windows 10.


Version 6.0.5.16 - June 21, 2015

Fixed Fixed: The naming method function for TS would not work correctly via the TS title selection.


Version 6.0.5.15 - June 17, 2015

New Added new video filter "Panorama Expand."
This filter allows you to expand a 360 degree panoramic picture or video which was recorded by devices such as the RICOH THETA m15 and KODAK SP360, and can export a normalized video that anyone can playback on a common player.
Added new video filter "Perspective Correction."
This filter allows easy correction for video which was shot from the wrong angle, or includes an incorrectly tilted object.
Added new method "Interpolation - High Precision" for the Deinterlace Filter.
This new method is capable of reducing jaggies and flickering pixels with higher accuracy.
Now supports directly importing ISO files.
This new function allows you to import an ISO file, which is created from Blu-ray, DVD-Video and AVCHD authoring files, without mounting by just dragging and dropping or using the import wizard.
* This function cannot be used in Windows 7.
Improved Improved: Added the "Outside Video Area" setting to the preview background color change function. You can change the color from the right-click menu or the Preview Settings Panel.
Corrections Fixed: Occasionally high frequency noise occurred depending on the source file when a low sampling rate was set in the output format settings.
Fixed: When importing a MOV file which was created by the Apple ProRes 422 codec, it was incorrectly recognized as RGB 8bit full range as the color information.
Fixed: When importing a keyframe list file in the Cut-edit window, the imported keyframe position may shift 1 frame depending on the time position of the keyframe.
Fixed: Occasionally an output AVI file became invalid when the Hap codec was used for the output.
Fixed: Occasionally an error occurred depending on the settings when using the GoPro CineForm codec for an AVI file output.
Fixed: Could not correctly recognize a TS file which contained a HEVC stream, and was multiplexed by the individual method.
Fixed: An audio gap occurred when importing a DVB-T2 broadcast date which was recorded by Windows Media Center, and seeking the file in the Cut-edit window.
Fixed: The value of the timestamp might be invalid when outputting a HEVC stream in MPEG-2 Transport (CBR) system stream.
Fixed: A one pixel gap occurred when snapping clips to the 4-split guideline if the timeline settings was set as interlace.
Fixed: An error might occur when launching the Batch Encode Tool when massive jobs remained in the tool.
Other corrections.


TMPGEnc Video Mastering Works 6 Version 6.0.4.14 - April 29, 2015
New First trial released version

Main New Features:
Native Support for 64-bit Architecture.
Format Related:
H.265/HEVC Output Support.
DivX HEVC Video File Output Support.
XAVC S Output Support.
10-bit 4:4:4 H.264/AVC Output Support.
High-Speed Hardware Encoder "NVENC" Support.
WebM and Ogg Output Support.
FLV Container File Output Support.
Support for Capturing From the bluefish444 I/O Board.
Animated GIF Importation Support.
YouTube and Other New Output Templates.
MPEG-2 Encoding Function Added to "Intel® Media SDK (QSV)".
Editing Related:
Clip Editing Interface Supports up to 8K Video.
More Substantial Filters- Timelapse, Diorama, Chroma Key and more.
Further Enhanced Timeline Editing Mode .
Range Selection Support
Enhanced Transform Function
Time Remap Function
Snap to Guidelines
Narration Recording
Sub-Timeline Function and more.
Asset File Function
Pre-Rendering Function
Output Related:
More Intelligent Output Operation
Automatic Bitrate Detection.
Highly Detailed Settings.
Other:
Project Archiving Function.
Dynamic 3D Transition Effects.
And more...


TMPGEnc Video Mastering Works 5 Version 5.5.2.107 - November 6, 2014
Improved Improved: Changed to fix the value of qp_minus26 in H.264 video streams encoded by the x264 encoder. This revision increases compatibility with players.
Corrected Fixed: Fixed a problem in the Source Stage where the clip number was not updated when replacing a clip in the clip list.
Fixed: Did not display the correct resolution in the Preview window of the TS/PGMX title selection when a clip which exceeds 2K was imported.
Other corrections.


TMPGEnc Video Mastering Works 5 Version 5.5.1.106 - July 14, 2014
Improved Improved the seeking speed when reading an MKV file which has no SPS, PPS data other than the header position.
Changed to use the standard decoder instead of the CUDA decoder when playing a file which exceeds 2048×1152 resolution due to the fact that the CUDA decoder cannot decode it correctly.
Improved to reduce some errors which occur related to the encoder specifications of the Intel Media SDK Hardware encoder parameters.
*Depending on this correction, the selectable framerate value is limited to 4fps or more.
Corrected Fixed: Occasionally could not import ".srt" and ".subtitle" subtitle files because the character code detection could not work correctly.
Fixed: Could not correctly import a UTF-8 file with BOM when importing it as an xsubtitle in the Subtitle Edit window.
Fixed: Applied the mask filter to unspecified ranges when using the Mask filter's Auto setting.
Fixed: Noise appeared when applying the "Replication-simple" setting as the Deinterlace filter method depending on the source video file.
Fixed: The acceleration speed of the "Precision video denoise" filter was decreased in comparison with the 5.4.2.103 or earlier versions.
Fixed: Could not move to the Encode stage when "Uncompressed RGB" was selected as the video codec in the AVI output format settings.
Fixed: Could not display an imported DVB subtitle correctly in regards to its size or position.
Fixed: An error occurred when creating a proxy of a file which was imported via the TS/PGMX file title selection.
Other corrections


TMPGEnc Video Mastering Works 5 Version 5.5.0.105 - June 2, 2014
New Added new functions to the QuickTime 7 Reader as follows:
Supports the ".dv" extension.
Supports the Windows RAW (WRAW) format.
Supports Interlaced H.264/AVC data other than the PAFF structure. Utilizes the header information for the field order and aspect ratio when importing.
Corrected Fixed: An error occurred when optimizing the CUDA acceleration on a "Maxwell" core GPU (i.e. GTX 750).
Fixed: Decreased the quality of the 24fps de-interlace filter in the AVX2 environment.
Fixed: Some noises occurred when playing the outputted AAC audio on devices which do not support TNS compression algorithm.
Fixed: Some white(transparent) frames at the end of a video was displayed when playing an outputted MP4 file on a QuickTime Player.
Fixed: Occasionally could not correctly reflect the value of the Encode/Bitrate Settings in the Format window.
Fixed: [TMPGEnc Movie Plug-in Commercial Candidates Detector] Occasionally could not keep the results of the commercial candidates detection when changing the path of the project's source files.
Fixed: [TMPGEnc Movie Plug-in Commercial Candidates Detector] When the Commercial Candidates Detector application had been executed by an error during detection, such detected jobs could not be added and detected.
Fixed: Fixed the MPEG file reader as follows:
Could not correctly import certain FLAC files with cover art.
Could not represent the bitrate information correctly when importing an AAC which was more than 96000Hz 4ch.
Displayed the wrong position of the subtitles which were created for a Blu-ray by TMPGEnc Authoring Works 5.
Could not represent the total duration correctly on the TS title selection window.
Other corrections.


TMPGEnc Video Mastering Works 5 Version 5.4.2.103 - December 10, 2013
New Now supports TMPGEnc Movie Plug-in Commercial Candidates Detector for TVMW5 (Sold Separately).
Along with this support, the following functions are added:
Added [Move to previous(next) frame] in the right-click menu of the Keyframe list.
Added the One-time cut option for the split-ranges in the Cut-edit menu. It is capable of cutting all blue(CTRL+E) or orange(CTRL+R) ranges at once.
Added the output as split points option in the Advanced keyframe tool.
Increased the maximum number of the split points from 30 to 99.
Changed to select the corresponding keyframe when jumping to other keyframes on the seek bar by using the keyboard short-cut [CTRL+←→].
Improved Changed the maximum size to 4TB from 1TB when outputting a AVI 2.0 file.
Corrected Fixed: Occasionally could not read a specific AVI file correctly when the Media Foundation reader was used.
Fixed: Detected a specific normal flac file as an invalid file.
Fixed a problem where the background color would be changed to white when a specific transition was set in the Timeline mode.
Fixed: Fixed a problem where the values which were set in a clip's property was not reflected to the Preview in the Timeline mode in case a key point was added automatically by using the animation option.
Fixed: Occasionally the audio stream specification of the QuickTime 7 file reader did not work correctly.
Fixed: Occasionally could not save a project file correctly when the focus was on a selection control button or others.
Fixed: Could not remove a key point icon from the Timeline mode correctly by using the right-click menu in environments which could not use Direct 3D or the option was checked off.
Fixed: An error occurred when analyzing a TS file which the TS file reader could not retrieve the sample information of the file.
Fixed: Occasionally could not load the FLV1/4 file reader correctly when initializing.
Other corrections.


TMPGEnc Video Mastering Works 5 Version 5.4.1.102 - October 14, 2013
New Now supports iPhone 5s/iPhone 5c/iPhone 4S and iPad(4th Gen) output templates in the Mobile/portable device MP4 file output format. For iPhone 5s, it further supports 1920x1080 60fps output.
Supports XAVC S files import.
XAVC, which is developed by Sony corporation, is a new standard format for 4K and HD videos. XAVC S is one of the standards mainly for consumer devices and softwares.
Improved MPEG-4 AVC (x264) encoder updated.
The PS Vita output template now supports 1920x1080 30fps output.
*Please use the latest firmware for the device.
Improved to add serial numbers as [01], [02], [03]... to chapters which have no chapter name when the "Output keyframes as chapter" option is being set.
Improved to reduce the memory usage properly when handling MPEG-4 AVC data.
Corrected Fixed: Occasionally the file-read-cache would turn off after updating from Version.5.3.x.x.
Fixed the MPEG file reader as follows:
Occasionally the application crashed when importing a broken FLV container file.
Occasionally the Linear PCM audio length was shortened after importing from an MPEG-2 PS/TS, MP4, MKV or other containers.
A part of the video in a MKV file which was created by the specific application became stop motion.
Could not import a MKV which contained an ADTS type AAC audio.
Fixed the Mediafoundation file reader as follows:
When applying the noise filter to audio, the sound became intermittent.
The MSVCR110.dll error occurred when importing a file which has different information described in the header from the actual data stream.
Fixed the QuickTIme7 file reader as follows:
Recognized an interlaced MOV file as progressive.
An error occurred when starting encoding if the Prefetch caches option was enabled.
Fixed: Thee application crashed when importing a bottom-field first interlaced video by the DirectShow/DivX and WebM file reader.
Fixed: Could not read a project file which used the BD file reader and was created by an older version.
Fixed: An erroneous conversion occurred when importing some specific subtitle data.
Fixed: The application crashed when importing BDAV data which had invalid system time point information.
Fixed: An error occurred when importing some specific BDAV data by using the Source Wizard.
Fixed: An error occurred when encoding in the batch tool by the invalid handling of the stand-by process for Dolby Digital.
Fixed: Occasionally an audio gap occurred when outputting a FLAC audio in the time line mode.
Fixed: Occasionally the Processor Affinity setting dropped while running the application.
Fixed: An error occurred during cut-editing some specific files when the AVX2 option was being enabled.
Fixed: The object handle of the preview with fast-rendering mode in the the time line mode was mispositioned under non-100% DPI display settings.
Fixed: In the Blu-ray/AVCHD MPEG file output, could not select the Intel Media SDK Hardware encoder under the Iris Pro Graphics environment.
Other Changed: Changed the compatibility of the project file. Along with this correction, older versions cannot load project files saved with this version or later.
Other minor corrections


TMPGEnc Video Mastering Works 5 Version 5.4.0.100 - June 27, 2013
New New: Added the VST plug-in filter for audio filtering as a function. *Supports only VSTe; VSTi/VST MIDI cannot be used.
New: Now supports the AVX2 instruction which is an extension for Intel 4th generation Core processors.
Also added SSE4.1/SSE4.2/AVX/AVX2 set options in the CPU/CPU settings window of the preferences. *This function is only supported in Windows 7 SP1 or later.
Improved Improved: Supports the MP@HPL(Level HighP) of the MPEG-2 video standard for MPEG file output settings. Related to this new option, 60fps is available when 1920 x 1080 is selected in the settings window.
Improved: Supports Level 5.2 of the MPEG-4 AVC standard for MPEG file output settings. Related to this new option, a maximum of 120fps is available when 1920 x 1080 is selected in the settings window.
*This option is not available in the MPEG-4 (AVC) file output, MKV file output and the Mobile device MPEG file output settings.
Improved: Improved to recognize a Dolby Digital audio stream which has several channel modes when the TS analyzer is used.
Improved: Supports importing .sgi(Silicon Graphics Image) and .tga(Truevision Targa) files by using the Image file reader.
Improved: Supports importing the original format type Blu-ray data (has Linear PCM audio) outputted by specific software.
*This option only applies for the Blu-ray title selection.
Improved: Supports importing QuickTime type MOV (MPEG-4 AVC/Linear PCM) files.
Improved: Made the file output speed faster in the 64-bit Windows environment.
Changed: Changed the interval to 500ms for the "At interval" of the Preview update in the Encode window.
Changed: Changed to remove the output file name cache when all clips are cleared in the Normal mode.
Improved: Supports importing a non-standard MP4 file recorded by specific smart phones.
Improved: Now capable of importing each resolution file if a Blu-ray title has several resolution files by using the Blu-ray title selection.
Improved: Improved to adjust a file level to the actual level if possible when importing a file which has a different level described in the header from the actual data stream in MPEG-4 AVC files.
CorrectionsFixed: The output speed slightly decreased when the Deinterlace, Picture resize and Noise reduction (time) filters were enabled in Ver.5.3.3.95 or later.
Fixed: An error occurred when outputting AAC audio with "4ch surround (2/2)" channel mode.
Fixed: A subheading was not applied to the clip name when importing a WTV/DVR-MS file.
Fixed: Did not import the specific DVD-video file even if the file list was displayed.
Fixed: An audio stream (Dolby Digital) could not be recognized when importing an MPEG file which was created by specific DVD authoring software.
Fixed: Part of Movie fragment-type MP4 files could not be recognized.
Fixed: An error occurred at 50% progress when outputting a source file which was being imported via the VFAPI plug-in with x264 VBR 2-pass settings.
Other IMPORTANT: If you own TMPGEnc Move Plug-in SpursEngine, please update to the latest version of the plug-in for TVMW5 before using this version. (You can download the latest version from your user account.)
Other minor corrections


TMPGEnc Video Mastering Works 5 Version 5.3.2.86 - March 14, 2013
New Functions Now compatible with TMPGEnc Status Messenger, http://tmpgenc.pegasys-inc.com/en/product/tsme.html


TMPGEnc Video Mastering Works 5 Version 5.3.1.85 - September 25, 2012
New Functions Now supports PlayStation® Vita and iPad® (3rd Gen) output templates in the Mobile/portable device MP4 file output format.
Supports FLAC audio file import and output (upon outputting, it is available only for MKV container).
Supports HE-AAC, HE-AAC v2 Audio output (available for the supported formats).
Improved MPEG-4 AVC (x264) encoder updated.
Optimized the preliminary process to initialize the exporter, therefore the preparation duration has become shorter.
For the Intel Media SDK encoding, removed the unsupported settings for MPEG-4 AVC output, and added the value of the Minimum bitrate according to the specification of the Intel Media SDK.
Made it possible to set the vertical size in multiples of 2 for MPEG-4 AVC output when the x264 encoder is used.
* Multiples of 4 are necessary for interlaced encoding.
Supports multiplexing MP2, MP3 and Dolby audio into a MP4 container.
* Some players could not play the multiplexed audio other than MPEG-4 AAC Low Complexity.
Enhanced the MPEG-2 transport output for the Blu-ray standard file output.
Added the audio formats ,e.g. multi-channel LPCM, to multiplex for MPEG-2 Transport (HDMV *for BDMV) file output.
Added the audio formats ,e.g. MPEG-2 AAC, to multiplex for MPEG-2 Transport (BDAV Common *for BDAV) file output.
Reduced the memory usage when decoding MPEG-4 AVC.
Improved the TS file importer. As a result of this, the clip naming method has been changed.
Improved the Blu-ray/AVCHD Reader, and changed the method of the distinction between playlist and clip.
Only displays clips when the content of the playlist and clips are identical.
Imports the time zone and recording time when the playlist contains them.
Does not display each m2ts file separately when a clip contains several m2ts files.
Improved the threading process speed of the 24fps deinterlace filter.
Improved the movement of the volume uniformization "Average" filter to get closer to a more average value. As the result of this, the prior version of the "Average" filter is displayed as "Average (legacy)"
Improved the picture series file reader so that it will not import them sequentially. The behavior can be changed from the Clip property window when such pictures are imported.
Improved the edit mode in the Timeline Layer mode. The following changes have been made:
The paste point from the clipboard became the current cursor position.
If possible, retains the positional relationship (Time/Layer/Transition) between each clip at the time of copying to the clipboard when pasting.
The Keyframe Tool can be used from the context menu by right-clicking with the mouse.
Corrected An error occurred on the Cut-edit window when using a specific driver version.
Other Changed the compatibility of the project file. Along with this correction, older versions cannot load the project files saved with this version or later. (This version can load the project files saved on previous versions without any problems.)
Other minor corrections.


TMPGEnc Video Mastering Works 5 Version 5.2.4.68 - April 23, 2012
Improved (Output) Now supports Intel® Media SDK 2012 for Intel Quick Sync Video and the hardware decoders.
Corrected (Playback, editing, filters) Fixed an issue where the application would sometimes freeze while playing a video on each preview window.
Corrected (Importation)Fixed an issue where noise would be added to the audio when reading 20/24bit PCM audio via the Media foundation Reader.
Fixed an issue where the application would sometimes freeze with when reading certain ISDB subtitles.
Other Other minor fixes.
Notice for users using the Intel Media SDK Hardware output:
When the Intel Media SDK Hardware is set as the encoder in an environment where the Intel HD Graphics driver is version 8.15.10.2618 to 8.15.10.2656, we have found that some of the following problems may occur:
The size of the output data set in "CBR" settings differ materially from the estimated size.
An error may occur at the start of output; this error has been found to occur for both "CBR" or "VBR" settings.
In these cases, we strongly recommend you install a driver version other than those listed above.


TMPGEnc Video Mastering Works 5 Version 5.2.3.66 - March 13, 2012
New Now supports MPEG-4 AVC encoding in the Blu-ray standard MPEG output format. In addition, supports file encoding for the AVCHD standard, which makes it possible to output an "AVCHD Progessive" stream in 1080/60p and 1080/50p. Because of this new feature, the following settings have been changed:
Important:
It is necessary to install the Intel Graphics Driver version 8.15.10.2361 or higher in order to enable usage of the Intel Media SDK Encoder for the Blu-ray (MPEG-4 AVC)/ AVCHD templates.
The output stream type should be set as a MPEG-2 Program (VBR) or Elementary (Video + Audio) stream when specifying MPEG-4 AVC with Linear PCM.
Added "Output stream type", "Profile & Level" and "Entropy coding" options to the Blu-ray standard MPEG file settings.
The default state for the "Output bitstream for editing (Closed GOP)" option is now unchecked in order to increase bitrate efficiency.
An AAC audio stream can be selected when BDAV (MPEG-2) is set in the Blu-ray standard MPEG file settings.
Maximum video bitrate limited to 35Mbps in the Blu-ray standard MPEG file settings. (To reserve a margin for output, previously saved projects will be revised to 35Mbps if they exceed the new maximum bitrate)
Added adjustment modes for each format in the MPEG-4 AVC Advanced settings of the MPEG output.
*The CUDA encoder cannot be used for the AVCHD standard MPEG output due to the specifications of CUDA.
*Please update to the latest version of the TMPGEnc Movie Plug-in SpursEngine before using it. (You can download the latest version from your User Account.)
Improved (Importation) Extended the search range of the MPEG file reader in order to apply it to TS files which have the start point of the stream far from the point of the data.
Added support for reading the S_VOBSUB subtitle format multiplexed in a MKV container.
Added support for reading Linear PCM audio and subtitles multiplexed in AVCHD 1080/50 or 60p files via the BD Reader.
Added new template options for the subtitle insertion, which are "Video frame & number of the edited clip", "Video frame number of the edited clip", "Time of the source clip" and "Video frame number of the source clip".
Improved the decoding speed for Dolby Digital audio.
Changed (Importation) Changed the compatibility of the project file.
Along with this correction, versions 5.1.1.52 and older can no longer load the project files saved on this version or later. (This version can load the project files saved on previous versions without any problems.)
When the QuickTime reader obtains the video format as YUV, the video will be handled as Compressed Range.
Corrected (Importation) Could not correctly retrieve the program name and the details obtained by TS analyzing.
Would not correctly load the BD output template saved on TMPGEnc 4.0 XPress.
Displayed a part of the video overlapped when reading a Type-1 DV file via the MediaFoundation Reader.
An error would occur when reading a non-compressed YUY2 file via the AVI file reader.
Could not read a DivX audio file correctly via the DivX file reader in a specific environment.
Could not correctly read a video which had been read via the QuickTime 7 file reader and the framerate was changed in the Clip properties window.
The Blu-ray/DVD/TS analysis reading function in the source wizard was corrected, and the following problems have been resolved:
An error occurred when reading a specific TS file after the TS file analyzing.
Took enormous amounts of time in order to read a file which contains invalid packet data.
Character corruption would occur when retrieving ISBD-TS subtitles contained in a TS file.
A part of the titles might not be displayed when reading a Blu-ray file which was saved in something other than NTFS.
The MPEG file reader was improved and the following problems have been resolved:
An error would occur when reading a MPEG-4 AVC file which had the end of the stream data in the middle of the file.
Could not read the full length of a WTV file which has a large size at a certain level when reading directly via the MPEG file reader and not the source wizard.
A sound gap or an error would occur when reading some specific files via the Windows Media file reader.
A sound gap might occur when reading a specific file via the DirectShow file reader.
Could not decode the end of the video stream when the Intel Media SDK software was set as the MPEG-4 AVC video decoder.
Could not correctly restrict reading the maximum number of subtitle streams up to 9999 in the Subtitle filter window.
An error would occur when reading a project file which contained over 200 clip registrations. Such file will no longer be loaded.
Could not correctly read a xsubtitle created by TMPGEnc Authoring Works 4.
When decoding a MPEG-4 AVC via the CUDA decoder, the bottom line of the video would be changed to a green color.
Changed (Editing) There was a possibility that a problem would occur on certain players where the output bitstream for editing (closed GOP) will be always checked in the MPEG-4 AVC/MKV file output and the Weighted prediction mode (P picture) will be always set as "Simple" when the x264 encoder was being used. (The settings will be corrected appropriately when previously saved projects or templates are loaded other than it moved or selected to the MPEG output.)
Corrected (Playback, editing, filters) Corrected the volume level meter to display correctly. Along with this correction, the lower value has been changed to "-40dB" on the meter.
A SEH error would occur when seeking on the preview window while the subtitle filter was enabled or when specific MPEG-4 AVC video data was input.
Could not display the subtitles of a specific TS file when seeking on the preview window.
In cases where Direct 3D was disabled for the audio wave and the thumbnail display, the scene change detector function (with the center mouse-click) worked very slow.
The Fast forward/backward on I picture option In the preferences would not work correctly.
In the timeline mode, the height and width values of a text clip would reset to its default when the clip was copy-pasted.
In the timeline mode, the clip length information would display the previous value even though the length had been changed.
An error would occur when a large value was entered into the timestamp setting in the keyframe mark editor of the timeline mode.
Improved (Output) Added Linear PCM 192 kHz/5.1ch and 96 kHz/7.1ch options in the MPEG output/Blu-ray (BDMV) standard MPEG file settings when the output stream type is set as elementary.
Changed (Output) The x264 encoder engine (x264) has been updated.
Added "full rate distortion optimization in all frames" option in the Sub-pixel motion estimation mode.
If there is a difference between the 1st pass and the 2nd pass cached content, the cache after that point will not be used during Multi pass MPEG-1/2 encoding.
Corrected (Output) Could not output a few frames of the end of a clip when the Intel Media SDK Hardware encoder was used.
The value of the "normal number of frames in a GOP" option would be smaller than the automatically set value which was used depending on the resolution and framerate selected in the output setting.
Displayed the Weighted prediction mode (P picture) option continuously in the Advanced settings window even though the level had been changed to Baseline.
In the Windows Media file output settings, the peak audio bitrate value sometimes would reset to its default even if it was set manually.
Corrected (Other) Other minor corrections


TMPGEnc Video Mastering Works 5 Version 5.1.1.52 - October 6, 2011
Improved
The Precision denoise filter accelerates much faster and reduces afterimages better than the prior version. Note that it is possible the filtering will not use CUDA acceleration depending on your computer environment since CPU acceleration related to the filtering can be much faster than that of some CUDA devices. In the case that the CPU is faster than the CUDA device, the CPU will be used.
Reference Data:
Input Source Info: 720x480 29.97fps (MPEG-2/mp2) 2229 frames
Output Format: DVD standard 720x480 29.97fps (MPEG-2+AC3)
Precision denoise filter enabled, "standard, strength 100"
CPU: Core 2 Duo E6550 (2.33GHz), 2 cores, 2 threads
Encode time (Ver5.0.6.38): 7m 57s (when using CUDA GeForce9600GT: 4m 47s)
Encode time (Ver5.1.1.52): 4m 52s (when using CUDA GeForce9600GT: 3m 11s)
CPU: Core i7 920 (2.67GHz), 4 cores, 8 threads
Encode time (Ver5.0.6.38): 6m 36s (when using CUDA GeForce 285GTX: 1m 31s)
Encode time (Ver5.1.1.52): 1m 54s (when using CUDA GeForce 285GTX: 1m 30s)
Precision denoise filter enabled, "standard, protect details"
CPU: Core i7 920 (2.67GHz), 4 cores, 8 threads
Encode time (Ver5.0.6.38): 11m 59s (when using CUDA GeForce 285GTX: 3m 11s)
Encode time (Ver5.1.1.52): 2m 01s (CUDA not used)
Improved (Importation)
Some specific codecs that cannot decode interlaced MotionJPEG in AVI containers will no longer be used. This revision reduces the cause of the display picture being black upon entering the Edit / Filter windows.
When reading a Blu-ray via the Source Wizard, chapter names can now be read.
The framerate is now displayed for each title during TS file importation through the Source Wizard.
Corrected (Importation)
Could not get the program name when reading the file through the TS file reader.
Could not handle half and full-size-space characters correctly when reading ISDB type subtitles trough the TS file reader.
Would freeze when reading some specific FLV files.
On Windows XP, it could not decode some specific MPEG-4/AVC stream that didn't have a notification of the end of stream.
Took enormous amounts of time in order to read some specific MOV files when read though the QuickTime 7 file Reader.
When opening a project file and a "could not find source" error occurs, replacing the missing source file would not work properly. could not work correctly, in case of replacing with other materials since an error occurred such as could not find a clip or other materials, and also such the materials includes a image file or specifying video and audio separately.
Fixed a problem where video files read with the Media Foundation file reader would not display properly when fast-forwarding or rewinding in the cut-editor.
The QuickTime 7 file reader was improved and the following problems have been resolved:
Brightness changed from the middle when reading a MOV file made from the AVID DNxHD codec
Could not decode in the correct order of frames for MOV files shot with specific cameras.
A sound gap would occur when reading some specific MOV files.
Could not open MOV files containing only audio streams.
TMPGEnc Video Mastering Works 5 would freeze when reading an MOV file without the codec despite requiring the codec to play.
The Source Wizard's Blu-ray/DVD/TS analysis reading function was corrected, and the following problems have been resolved:
Could not correctly read specific character strings such as program information when reading a Blu-ray file (BDAV).
Could not correctly read data containing two or more STC sequences when reading a Blu-ray file (BDAV).
Would sometimes not perform correctly when getting the duration of the title when reading a Blu-ray file (BDAV).
A divide by zero error might occur if there was a lot of garbage data in the MPEG stream header when reading a Blu-ray file (BDAV).
Titles might not be included in the title selection when reading a Blu-ray file (BDAV) which contains 50p or 60p video data.
Upon reading Blu-ray (BDAV/BDMV) data, the operation might be overly intensive due to unnecessarily checking at the end of the file when reading the last subtitle data.
Could not read only a part of specific BDAV/BDMV data when reading a Blu-ray file (BDAV/BDMV).
The thumbnail image in the title list would not be displayed correctly when reading a Blu-ray file (BDAV/BDMV).
The MPEG file reader was improved and the following problems have been resolved:
When reading Dolby Digital Plus audio, a memory leak would occur.
When previewing Dolby Digital Plus audio from the file head, there would be no sound.
When opening an MPEG file which contains several types of audio formats, they would sometimes not be reflected in the list for the audio stream selection.
Would refer a wrong proxy file when specifying.
Would mistakenly recognize the size as 1920×1088 when reading a 1920×1080 H.264 MOV file.
When decoding AAC audio which switches the channel mode in the middle, a noise would occur at the switching point.
When reading specific FLV files, the picture would become black and the time would not display correctly.
When reading AAC audio which switches the channel mode in the middle, a audio gap would occur at the switching point.
When the audio packets did not include audio-data in the file head, the FLV file reader would incorrectly identify the type of audio.
Corrected (Output)
The MPEG-4 AVC (H.264) encoder engine (x264) has been updated.
Upon outputting JPEG files, the component Id within the SOF0 segment was not correctly marked.
Could not correctly display the error when the commit size approached the 4GB memory size during encoding with the x264 encoding engine.
When an exception would occur in the internal encoder, there would be no notification of the details of the exception.
Depending on the timing, it was possible that Memory Access Errors would occur when starting multiple simultaneous encodes from AAC audio or FLV files as the source materials.
Would output invalid files when outputting an H.264/AVC file using the Intel Media SDK encoder and the number of reference frames was set as "1".
If the source file was an H.264/AVC stream with a multi-slice picture field, it could not be multiplexed into an MP4/MKV.
Could not control the VBV buffer correctly when multiplexing some specific MPEG-2 video streams.
When the baseline profile was selected for MPEG-4/AVC output, some advanced settings that should be fixed were changeable.
When CUDA was enabled, the QuickTime file output would be choppy.
A QuickTime file encoded as a MOV was not displayed correctly in some environments.
The value of the average bitrate would change immediately in response to other numerical inputs even if it was changed in the encoding/bitrate settings for output such as MPEG or MKV.
Changed (Output)
When using the x264 encoder, the aspect ratio is now based on the 2005 H.264 standards instead of the 2009 standards since some players still cannot interpret the 2009 standard.
Corrected (Playback, editing, filters)
Noise would appear on a picture when the width/height was not a multiple of 16 when using the Precision Denoise Filter through CUDA.
The Mask filter's (type: Blur) set strength value would revert to the default value when the filter window was re-opened.
After selecting 24fps as the Deinterlace mode, an error would occur when the source aspect ratio was changed in the clip settings.
The vintage picture filter was unable to be used when SSE2 or later was enabled in the CPU settings. Also, an error occurred when it was used in an environment where multi threading acceleration for filtering was enabled.
In the subtitles filter, the characters would display at a shifted position when a specific layout setting was used.
The mask when added through the mask filter would not be deletable by using the DEL key or specifying the unmask range.
In the audio properties window of the clip properties, pressing the ESC key would apply changes to the channel mode setting.
Even though thumbnail would be disabled, the high-speed thumbnail navigation would still work with the Ctrl + number keys.
On a PC which had not been restarted for a long time, an error occurred at startup when trying to edit a project that was previously registered in the batch encode tool.
In the explore view function of the timeline window, a sample format error occurred when playing a source with a width or height of 2048 or more.
When inputting an MPEG-4 file into the Multiplexer(advanced) in the MPEG tool, the default output format would be MKV.
Corrected (Other)
A canceled job still remained in the batch encode tool when the tool was re-opened.
When editing a long clip in the timeline window at maximum magnification, making changes to the volume level caused an extraordinary increase in processing activity.
In cases where network hardware equipment had been replaced since the last license validation, a license validation prompt would be executed again.
An deadlock would occur in communication between TMPGEncVMW5Encoder.exe and the main exe.
On environments where there is an H67/Z68 chipset and dual monitors, the CUDA functions could not be used depending on the connection settings.
In cases where the batch encode tool had been reopened from the taskbar, the tool would not accept the adding of project files by drag-and-drop.
Even though the MPEG extension setting had been changed in the preferences, the setting would revert without being stored properly.
Other minor corrections.


TMPGEnc Video Mastering Works 5 Version 5.0.6.38 - May 11, 2011
Added Possibility to set 1 pass in the x264 encoder when in average bitrate mode. (The default number of passes can be set in the Preferences window)
Corrected (Importation) Some specific TS files could not be decoded by the Standard decoder (MPEG-4 AVC) and caused an invalid termination.
The audio sampling rate would be twice the actual sampling rate upon analysis of some specific TS files.
TS files having a faulty stream type can now be imported.
Stream analysis would fail and an error would occur when zero padding was included in an AVC stream.
MPEG-2 TS files generated by certain equipment and containing only I Pictures can now be correctly imported.
The bilingual filter would not function properly upon importing through the "From a Transport Stream file" option.
The ISDB standard subtitle display would not stop correctly when data said otherwise.
When importing subtitles through the BD reader, subtitles would not display with the correct color.
The thumbnail display would be slower in the Cut-edit window when a progressive source was imported through the BD reader.
Hang ups and errors would occur near the end of a clip when using the navigation function in the Clip editor for clips opened through the TS/BD reader.
Noise would appear on the right side of the picture when decoding a specific WebM file.
Non-WebM MKV files are no longer imported through the WebM reader because some unsupported MKV files would cause an error in the WebM reader.
Audio sampling rate could not be correctly retrieved when importing Type-1 DV files through the MediaFoundation reader.
Correct video time could not be retrieved and an audio gap would occur when opening a file with variable sample timecode through the MediaFoundation reader.
The MPEG reader would sometimes confuse normal AAC audio with HE-AAC audio.
Framerate analysis could not perform correctly for MP4 files generated by a specific device.
An error would occur when importing M4V files generated by specific software.
A timeout error would occur when applying a filter template on materials imported through the VFAPI reader.
File importation has been improved, bringing the changes listed below.

Drag'n dropping a folder containing data other than a DVD/BD volume now displays the list of found supported files.
When selecting several files, and the Source Wizard appears for some of the files, you have the option to exclude files that may be processed twice.
When files are VOB/MTS/M2TS in a DVD/BD volume structure, you now have the choice to import them directly or through the Source Wizard. You can also elect to always use the same importation method without going through the new method selector window.
When files are MTS/M2TS but not in a BD volume structure, you now have the choice to import them directly or through the Source Wizard's TS file importer. You can also elect to always use the same importation method without going through the new method selector window.
When files are VOB but not in a DVD volume structure, you now have the choice to import them directly or through the Source Wizard's DVD file importer. You can also elect to always use the same importation method without going through the new method selector window.



TMPGEnc Video Mastering Works 5 Version 5.0.5.32 - February 24, 2011
Corrected (Importation) The MPEG-4 AVC decoder would not correctly decode when there were 16 reference frames of data.
The VFAPI file reader could not correctly retreive the audio and/or video when several instances were used.
The AVI file reader no longer uses some of the ACM codecs that would cause a buffer overrun.
Can now import MPEG-2 TS files that some software generates without Access Unit Delimiter.
Can now import the LATM AAC audio format included in WTV files.
Correctly recognizes the bitrate from MPEG-2 Video streams with a broken or garbage-filled header.
Does not hang-up when importing corrupted AVC streams through the standard decoder.
Corrected (Output) In some cases, DVD-Video MPEG file output would output a GOP longer than the DVD-Video standard requirements.
In some cases, the Blu-ray MPEG file output's maximum GOP size value would be lower than the Blu-ray standard limit.
MPEG-4 (AVC) file output's YUV colorspace settings would sometimes be incorrect.
An error would occur in MPEG-4 (AVC) file output when moving to the Format stage while the first clip of a project would require setting values out of the Level 4.1 range.

* From now on, if the project header clip's characteristics require Level 4.1 or higher, the encoder settings are automatically rounded to Level 4.1 compliance. (ex.: In case of a 1920×1080 59.94p clip -upon applying Double framerate filter-, the encoder setting will be 1920×1080 30p. *Note you can manually change the Level and then set any arbitrary value.)

When using the Intel Media SDK or the SpursEngine for the MPEG-4 (AVC) file output in interlace display mode, the resulting framerate would be seen as double than what it should be.
When outputting in an MPEG related format, the encoder's Performance setting would sometimes reset to its default value if the Output multiplexer setting was changed from System (Video + Audio) to ES (Video + Audio) and then changed back to System (Video + Audio).
Corrected (Other) An error would occur when applying the CUDA version of the Precision video denoise filter on a clip with an original or resized specific size.
Subtitle playback timing and other related settings would become incorrect upon cut-editing a part where a scrolling effect was set in the Subtitles filter.
Mobile and portable device MPEG file output template folder name contained invalid characters.
Other corrections.


TMPGEnc Video Mastering Works 5 Version 5.0.3.29 - February 17, 2011
Improved MPEG-4 AVC (x264) encoder updated.
Added aspect ratio to the MPEG-4 AVC output (12:11 / 10:11 / 16:11 / 40:33 / 24:11 / 20:11 / 32:11 / 80:33 / 4:3 / 3:2 / 2:1) *Available aspect ratio options depend on the selected encoder.
Thumbnail creation for PSP added to the output. (Added in the "Other" tab of the Mobile/portable device MPEG file, MEPG-4 (AVC) file output, MKV file output, and MPEG file output templates.)
iPod/iPhone, etc. named chapter support. (Use the "Edit the keyframe name" option added to the Clip editor window's Cut-edit stage or Slideshow editor window's Preview stage's chapter list contextual menu.)
Demultiplexing of MPEG-2 AAC audio multiplexed in a MP4 container has been added to the MPEG Tools.
When outputting in MPEG-4 (AVC) or MKV, the source aspect ratio is automatically used as the encoder's default aspect ratio.
Maximum bitrate setting added to the SpursEngine output in VBR mode. Following this correction, a warning appears when the maximum bitrate in VBR mode is 1.5× larger than the average bitrate.
Added a "Clear history" contextual menu option in the Start window's Project history list.
Added an encode progress display in the application's task bar icon when reduced.
Blur option added to the Text's border effects in the timeline.
When importing an MPEG-2 video, gets a more precise displayed average bitrate in the Video properties window.
Added an "Apply a low-pass filter on the color channels" option in the SpursEngine file output template. (Enabled by default, disabling this option may reduce the outputted picture quality but increases the encoding process speed.)
Corrected (Importation) An error preventing the importation would occur when pointing the source to a specific BDAV data structure.
Updated the standard MPEG-4 AVC decoder, resolving the issues below:

* An insufficient memory error would occur when navigating through the content of an MPEG-4 AVC source encoded into a specific method;
* Some specific data would yield different results than the reference decoder;
* The recognized framerate would be double the actual framerate and prevent correct playback when importing some specific MP4 files;
* Video would not display correctly when importing AVC video from an M2TS file through the standard decoder;
* Audio noise would occur when importing some MOV files containing MPEG-4 AVC video and Linear PCM audio.

Reduced the TS reader memory usage. This should help avoid the appearance of an "Insufficient memory" warning when editing.
Appropriately imports files without trying to use Picture Timing SEI data (data that holds the picture display timing) which some capture devices do not generate correctly.
Updated the MPEG reader, resolving the issues below:

* Analyzing 192 byte packet TS files would take a lot of time and eventually fail;
* ISDB subtitles would not display correctly after navigating in the clip;
* Some specific characters would not display correctly in ISDB subtitles;
* Stereo audio from a DVD-VR source would be recognized as monaural;
* Improved the reader to handle files with an abnormal timestamp in the MPEG header packet to the best extent possible.

Playback would not be smooth for FLV files with a framerate of 25 fps, etc.
Supports importation of some non-compliant FLV files.
The application would freeze when importing specific MKV files.
AVC streams contained in some MKV files could not be correctly demultiplexed.
The displayed HE-AAC audio sampling rate would be half the actual data.
The fast thumbnail would display a green border on the left of the preview with some specific source files.
An insufficient memory error would occur when encoding content imported through the Media Foundation file reader.
Corrected (Output) Corrected issues below related to the Intel Media SDK output:

* The outputted file's profile would be High when using the hardware encoder;
* When encoding in MPEG-4 AVC, levels that cannot be used by the standard (Level 5 / 5.1) would display anyway;
* For the PSP, files encoded through the software encoder using the "Somewhat slow" Performance option would not playback correctly on a PSP.

Corrected issues and improved the SpursEngine file output as below:

* An "Incorrect parameter" error would occur when performing a series of commands in a given order;
* Can no longer encode output with less than 4 frames as per the SpursEngine hardware specifications. When outputting a file with less than 4 frames, the last frame is duplicated until the total length reaches 4 frames and is then outputted

Corrected issues and improved the MPEG file output as below:

* No longer displays non-standard compliant motion search methods (Exhaustive search, Hadamard exhaustive search) and the "Weighted prediction mode (P Picture)" option when encoding video in interlace mode with the x264 encoder;
* When outputting chapters in MPEG-4 (AVC), a first chapter at 0 timestamp is automatically added to the list;
* Unusable channel structures were displayed when using the MPEG-4 (AVC) or MKV file outputs;
* In the MPEG file output, enabling the "Start closed GOP with a B Picture" option would sometimes result in the appearance of an "Invalid MPEG-Video stream" error depending on certain other settings;
* In the MPEG file output, changing the encoder changes the "Maximum number of frames in a GOP" option from 0 to 1023;
* In the MPEG file output, among others, changing the average bitrate setting in the Bitrate calculator now also changes the Maximum bitrate value;
* When selecting the Blu-ray standard MPEG file output, an invalid parameter error would occur due to non-processable settings.

When encoding in AAC audio, a 1 block/1024 sample delay would occur.
When an unexpected error forcing an abnormal ending of the encode occurred, a memory accsess error would then occur and the display would be affected.
Corrected (Other) Corrected issues and improved NVIDIA CUDA support as below:

* CUDA would not be usable when the host computer tries to use both CUDA and the Sandy Bridge internal GPU at the same time;
* Processing the Mosaic filter through CUDA would turn the tiles into green or blackish colors;
* When using the CUDA encoder, enabling the prefetch cache would make the encode process slower than when disabled;
* CUDA related warnings or messages would display when starting the encode process;
* Changed the CPU and CUDA usage rate displayed during the encode process. The CUDA usage rate now appears only when CUDA is actually enabled.
* CUDA performance optimization is now strictier. (With this correction, the performance optimization may take slightly more time than before.)

Corrected issues and improvements in the Cut-edit, Filters and Timeline windows as below:

* An incompatibility would occur for the "Vintage", "Sharpness", and "Smart sharpness" filters when combined with CPU settings that cannot use SSE2 or higher optimizations;
* Application would freeze when applying a Filter template containing a "Sharpness" filter setting;
* When an error would occur during clip editing, the Clip list item's "X" (Delete) button would not function anymore;
* A timeout error would occur when using the "Precision video denoise" filter with CUDA enabled, and could not be used. Also, its default Strength setting is now 100 instead of 300;
* In the "Speed" filter, enabling the "Apply Anti-flickering filter to interlace picture when necessary" option would actually apply the Anti-flickering filter even when not necessary;
* The audio waveform display would not entirely be consistent with our previous software;
* The navigation icon and speed meter would not display when using the "Mask" filter;
* When setting the preview navigation keyboard control to the "% scrollspeed" unit in the Preferences, the scrolling would not occur correctly in the Clip editor window when the scroll commands were used;
* When using filters (Color correction, Subtitles) in Timeline mode, the effect would be displayed twice in the preview;
* Upon moving the preview size slider in the timeline, the mouse wheel would not function anymore on the navigation bar or audio volume slider.

Updated the Batch encode tool, resolving the issues below:

* Upon stopping the batch processing, and re-starting it, the batch processing would suddenly cancel itself;
* When iconifying the Batch encode tool, its icon would still appear in the Task bar even when the iconification preference was set to "Display only in the task tray";
* The batch list information would not update when updating a batch from the main application in linked mode;
* In the Project editor window, entering an invalid output file name would cause an invalid character string error even when clicking the "Cancel" button.

The encoder preview display would not update during the encode.
Setting a keyframe at a timestamp position more than 2 hours in the timeline could not be possible.
In the Clip editor window, the thumbnail now updates when adjusting the thumbnail display and using the navigation keys or during the scene change detection.
Other corrections.


TMPGEnc Video Mastering Works 5 Version 5.0.2.22 - February 3, 2011
New First Released Version.

Take Your Video Further.

Do more with your video than ever before with powerful new features such as the incredible Timeline Editing Mode. Edit and combine your video clips faster than ever, then add transition effects, text, subtitles, and new filters to push it to the next level. New output and encoding options save time and widen your possiblities.
x264 powered H.264 encoding engine settings.

New H.264/AVC Encoding Engine.
Powered by the x264 Encoder.

In addition to the high image quality MPEG-1/2 output of the worldwide appraised, highly featured original "TMPGEnc Advance MPEG 1/2 Encode Engine", the H.264/AVC output uses the X264 high quality encode engine, the same encoder that YouTube, Facebook and many other websites have chosen for their video processing. Combining the Pegasys proprietary technology with the x264 high quality functions and numerous detailed parameters, we provide the user with the highest quality.

H.264 CUDA Encoding!
NVIDIA CUDA H.264 Encoding.
Not Just for Filtering Anymore.

In addition to CUDA-enabled filter processing and decoding, TMPGEnc Video Mastering Works 5 supports H.264/AVC file output using the CUDA technology provided by NVIDIA. The CUDA technology makes use of the GPU (graphic board CPU) with multi-core parallel processing to process complex calculation problems in a short time. By splitting the processes into parallel elements, and using the massive processing power, the program can run even more effectively. Using this function with a compatible graphic board improves processing acceleration when compared with CPU-only use in most cases.

Intel® Media SDK H.264 Encoding and Decoding.
Sandy Bridge Support.

TMPGEnc Video Mastering Works 5 also uses the Intel® Media SDK (2.0) to encode and decode H.264 content. This function, which will use the new Intel Sandy Bridge micro-architecture embeded in CPUs that are planned for release in the begining of 2011, enables hardware support of the encoding and decoding process. Tests conducted with TMPGEnc Video Mastering Works 5 showed an acceleration of almost 5 times faster when using the SDK compared to a Core i7.

Check out the full benchmarks!
Enhanced for Intel Core About 5 times faster
Dolby Digital Plus
Dolby Digital Plus Support
6 Channel Surround Sound.

Supports the next generation surround sound Dolby Digital Plus 5.1 channel format, widely used in Blu-ray discs, HDTV broadcasts, video distribution networks, and more. Import content that includes this audio format with confidence.

Integrated DV/HDV Capture.
Import Directly From Your DV/HDV Camcorder.

Includes a capture function allowing you to import video directly from your DV or HDV camcroder. You can now seamlessly edit video without using a third party application.

New MPEG-TS importer.
Blu-ray, AVCHD, and MPEG-TS Importation.
New TS File Analyzer.

This function allows you to select a specific import title clip within a Blu-ray (BDMV/BDAV) or AVCHD file. Using the thumbnail preview you can verify the content beforehand and avoid any mistakes. Furthermore, if several subtitles are also available you can select one of them. Regarding the MPEG-2 TS file, the function analyzes and lets you choose to the best extent possible, a multi-structured video file (containing several video, audio and subtitle streams) or video where the resolution changes mid-flow. *Encrypted or copy-protected files cannot be imported.

Timeline Layered Editing Mode.
Go Beyond Just Encoding.

In addition to the normal List mode, where clips are put one after the other, it is now possible to edit in Timeline mode. Of course, you can add several timeline layers. This function is not aimed at creating complex content, but is designed with the feedback and strong demand from our users in the domain of video encoding, who look for adding effects like picture in picture, etc. packed in a simple and effortless interface. Learn more...
The all-new timeline editing mode.

Add Transition Effects.
Over 170 Effects for Slideshows and Clips.

You can now add a transition effect between videos. More than 170 transition types can be combined to create impressive video. This function is also available within the Slideshow clips. Additionally, Slideshow clips can be animated with a zoom-in/zoom-out effect.
The Transition Effect editor. Zoom effects for slideshows.

Instant Clip Preview (Normal Mode).
Check Clip Content Instantly.

When importing several clips you might quickly lose track and have a hard time finding which one to edit. By using the Instant clip preview, you can verify the clip's content without having to open the Clip editor window.

Instantly preview a clip.
Mask Filter.
Add a Mosaic, Blur, or Color Overlay.

When uploading original video to YouTube or other community sites, privacy concerns may require you to blur some parts of the video while keeping it interesting. The new Mask filter makes this possible. It provides different masking types that can be applied to different scenes. Also, an "Automatic" mode allows you to apply the mask position while playing the video. You can even slow down the playback to safely keep track of the area to mask over.
The new Mask Filter.

MKV Output Container Support.
Create a Variety of Files.

Supports the MKV container format output, a format well known for its large freedom of content multiplexing capabilities. TMPGEnc Video Mastering Works 5 allows you to set MPEG-1, MPEG-2, or H.264/AVC streams within it.
The new mkv output settings.

Output One Project to Multiple Formats.
Save Time with Multiple Format Output.

With this function, it is now possible to output all formats that are set in the Output format list at one time, allowing you to output the same video for the Web, for Mobile devices, and PC formats. You can also use it to compare the quality between different settings of the same output format.


TMPGEnc 4.0 XPress Version 4.7.8.309 - September 15, 2010
Added AAC 5.1 support in the MP4 file reader.
Fixed MP4/AVCHD file reader updated. This update corrects an issue where some video data would not be decoded unless played frame by frame.
Fixed AVI file reader updated. This update corrects an issue where AVI files having a partially invalid header could not be opened.
Fixed 44.1 kHz Dolby Digital audio files would not be correctly decoded.
Fixed Multiple WTV files imported through the Source Wizard would not open correctly.
Fixed Improved the file MPEG-1/2 file importaion when the VBV buffer size value is smaller than what is expected from the file characteristics, but is still within the limits.
Fixed Other minor fixes


TMPGEnc 4.0 XPress Version 4.7.7.307 - June 16, 2010
Added CUDA - CUDA 3.0 support. (There is no functional difference in TMPGEnc 4.0 XPress when using CUDA 2.3 or 3.0).
This addition corrects the impossibility to launch TMPGEnc 4.0 XPress when a NVIDIA® GeForce GTX400 series video card (with a Fermi architecture graphic chip) is present.
*CUDA 3.0 support is available only for the GeForce GTX400 series video card. *Accessing the GeForce GTX400 series video card CUDA function requires the NVIDIA graphic driver ver. 197.13 or newer version.
Fixed AVCHD file reader updated. Some data would cause the continuous display of the same picture.
Fixed MPEG file reader updated, allowing the correction of the issues listed below.:

* TS files containing abnormal packets would be processed as normal packets, causing an error during the importation;
* Some TS files would be mistakenly recognized as a PS file;
* Linear PCM at 192 kHz would not be correctly processed.

Fixed FLV file reader updated.
Fixed Conversion to PS of some WTV files containing AAC audio would suddenly come to a stop.
Fixed DVD-Video with a VOB containing a lot of useless data would not be correctly imported.
Fixed When importing DVD-Video content through the DVD reader, if a problem occurs in a title, only this title is discarded instead of the whole DVD-Video.
Fixed Some transitions would not generate the proper effect.
Improved Some JPEG data would be imported with added noise.
Fixed Other minor fixes


TMPGEnc 4.0 XPress Version 4.7.6.304 - March 31, 2010
Added CUDA - CUDA 2.3 support.
Access to the CUDA function requires you update your graphic driver to version 190.38 or newer from NVIDIA. If you use a previous version, you will not be able to access CUDA.
Added MPEG-2 + AAC WTV file support (The audio part of a WTV file converted into a MPEG-2 PS file by the Source Wizard may not play correctly in Windows Media Player).
Improved Updated the MP4/AVCHD file reader. This new version:

* Allows the reading of some files that could not be imported before.
* Fixes a doubled playback speed issue.
* Fixes a pink video noise appearing in certain configurations.
* Fixes a bold stripe pattern noise appearing in certain configurations.

Improved Improved memory usage for when the memory is too low, "Insufficient memory," "Invalid sample format," or other errors would display. Because of this improvement:

* Memory usage has been dramatically lowered when setting the output mode to "Output all clips into one file (or set of files)".
* The negative affects of large memory address space usage are limited, especially in Windows XP.
* Memory usage has been lowered when registering a large amount of keyframes in a project.
* Limits the usage of the file importation cache when the host computer contains a large memory.

Improved The MPEG file reader can now import a PTS data-only MPEG file.
Improved The Dolby Digital decoder continues outputting audio even after encountering corrupted data.
Improved Some specific chapter thumbnail pictures from certain DVD-Video data could not be imported.
Improved Using NearestNeighbor or BiLinear to dramatically (50x) increase the picture size could rise an error.
Improved Drag and dropping a WTV file in the Source list now automatically displays the Source Wizard.
Fixed In certain configurations, the Preview buttons of the cut-edit window would not display correctly and the audio waveform would display a "No audio available" message.
Fixed In certain configurations, an error would appear at the end of a Windows Media Video output when the "Output keyframe as marker" option is enabled.
Fixed Some capture cards' data could not be correctly converted when converting a WTV file into MPEG-2 PS.
Fixed AVI 1.0 format outputted DivX file would not play correctly with the default Windows 7 decoder.
Fixed Changes to the audio noise reduction filter would not be correctly be taken into account after a preview.
Fixed Freezes would occur when applying a filter template containing audio noise reduction or audio fade-in/out to an audio-less clip.
Fixed In the batch encoder tool Project editor, leaving the Output file/folder information blank would prevent any reference or cancellation.
Fixed Other minor fixes


TMPGEnc 4.0 XPress Version 4.7.4.299 - January 11, 2010
Added AAC 5.1 ch (6 channels) import support. (Importation of an MPEG-2 TS file containing an AAC stream up to 5.1 channels is now possible.)
In addition, when importing an AAC stream you can manually set the number of channels in the "Clip properties" stage of the "Clip editor" window.
Added Multistream selector function in the MPEG file reader.
You now have the possibility to select a specific video and audio stream when the MPEG-1/2 source file contains several video and audio streams.
Added Support of the Microsoft TV recorder file format "WTV".
(WTV file importation is possible on the computer that recorded the file, or can create such files, and are not copy-protected.)
Improved MP4/AVCHD File Reader updated.
Should allow the importation of files that could not be previously imported, and solve the playback speed issue.
Improved YUV color space information contained in the source file is now taken in account when imported through the MP4/AVCHD File Reader. If no color space information is available, the BT.709 or SMPTE 170M color space is automatically selected according to the pixel rate.
Improved When outputting an MPEG-4 file, the YUV color space is selected according to the resolution and framerate, the color space is then converted to the selection before the encoding stage.
Improved When the Batch encode tool fails to retreive the automatically saved batch list it now displays an error message, erases the batch list and resets.
Improved Following a silence, the audio uniformization filter could highly increase the volume, resulting in an explosion-like effect. The improved filter reduces the occurence of such an issue.
Fixed An audio gap would appear when continuing to import a file through the DirectShow reader without seeking it.
Fixed The DirectShow Reader audio management has been adjusted, allowing the DivX Reader to correctly get the audio.
Fixed AAC decoding now resumes instead of stopping after some corrupted data has been encountered.
Fixed Some flawed header or trailer MPEG files are now importable through the MPEG File Reader.
Fixed The Windows Media Audio file output does not allow the registration of unexpected file extensions anymore.
Fixed The DivX file output basic mode would always set the level to Medium even when Low or High was selected.
Fixed In the DivX file output, reducing the profile would display a wrong framerate in the window.
Fixed In the DivX file output, it was possible to select a non-standard MP3 bitrate.
Fixed The Batch encode tool would sometimes display an error message when started, and not display it when restarted.
Fixed The WAVE file output advanced mode would note .1 ch even when no .1 ch was selected.
Fixed The Smart sharpness filter picture edge processing is stricter, reducing the occurence of possible problems.
Fixed The seek bar motion is now smoother in the Preview display window, or when disabling the thumbnail display in the Clip cut-edit window.
Fixed Other minor fixes.


TMPGEnc 4.0 XPress Version 4.7.3.292 - August 18, 2009
Added DivX® encoder/decoder updated to the latest version.
Added DivX® file output support extended to 1080p.
Added DivX® output offers an AVI container type selection. (1080p profile is AVI-2 container type only). Because of this addition, the "Partition" tab is renamed as "File" tab.
Added DivX® file output maximum bitrate is updated to support the new profile specifications (The GMC option is available when the profile is set to "none" and the resolution is no greater than 1024x768).
Improved Audio seek processing for DirectShow filter type source.
Improved Memory usage for the time-based noise filter is reduced.
Improved Output stage: output start, batch registration and preview can be activated through keyboard shortcuts:
Encode start/stop = CTRL + Shift + S
Batch registration = CTRL + Shift + B
Preview = CTRL + Shift + P
Improved The MPEG-4 AVC file output bitrate control mode 2 pass Constant bitrate is removed. (Project or output setting template containing the 2 pass Constant bitrate option is automatically ajusted to 1 pass Constant bitrate.)
Improved The MPEG-4 ISO file output has Maximum bitrate, VBV buffer and Quarter pixel options added, allowing improvement of the picture quality. Some settings of the "Video" tab are now in the "ISO" tab.
Improved DivX file output "File" tab displays a warning that used to appear when moving from the Format stage to the "Output" stage.
Fixed Some MPEG-2 TS file could not be imported correctly.
Fixed Some outputted non-standard DVD-Video or DVD-Video header containing garbage data could not be imported correctly.
Fixed Some out of standard MPEG-4 files could not be imported correctly.
Fixed Some filter processes could raise an exception and instead of correctly displaying an error would stop the encode process.
Fixed AVCHD files generated by a camcorder would not be imported entirely.
Fixed An insufficient memory error would occur when encoding the biggest WMV clip registered in the Source stage.
Fixed Using the Smart Sharpness filter in CUDA mode would sometimes slow down the processing speed.
Fixed Sometimes when starting a batch output in the Batch encode tool, an output setting importation error would arise, and the output would start with different settings.
Fixed Launching the Batch encode tool would display an error that would not appear after restarting the Batch encode tool.
Fixed When using CUDA, the GeForce driver version check would only retreive the display driver version.
Fixed When using CUDA, an invalid process could arise with the Contour filter.
Fixed When using CUDA, setting a positive value in the Audio gap correction would prevent the audio from playing in the clip header during a preview.
Fixed Other minor fixes.
SpursEngine* File Output
Added "Tighten up bitrate limit" option added. This option allows you to control the SpursEngine bitrate overflow. (Previous versions had this option always enabled).
Added The MPEG-4 AVC output VBV buffer size maximum value is increased frmo 2047 KB to 4094 KB.
Fixed During the SpursEngine plug-in device check, the SpursEngine board could not be correctly recognized when the drivers were not installed.
Fixed The VBR output would sometimes not function properly. This correction improves the picture quality. (Please install the latest version of the TMPGEnc Movie Plug-in SpursEngine).


TMPGEnc 4.0 XPress Version 4.7.1.284 - April 27, 2009
Added Support for the TMPGEnc Movie Plug-in SpursEngine.
Fixed Some specific MPEG-2 TS data (AVCHD data) would be be processed incorrectly.
Fixed Some specific MPEG-4 file would be be processed incorrectly.
Fixed Some specific audio data would not be correctly decoded by the AAC decoder and resulted in complete absence of audio.
Fixed MPEG-4 file output would sometimes be incorrect in interlace mode.
Fixed The picture would become green during an output using CUDA. If this problem occurs again an error arises.
Fixed Some MPEG files could not be read anymore.
Fixed In some cases, when multiplexing a MPEG-1 System stream or MPEG-2 Program stream, the PTS would not be placed in the adequate PES.
Fixed The framerate selector display would become invalid when selecting the "Playback 3:2 pulldown" option in the MPEG output settings.
Fixed Other minor corrections.
Changed CIF resolution selection can no longer be selected in the SpursEngine file output when automatic resolution setting is active for the Super resolution processing.
Changed CUDA - CUDA can now be enabled even when the driver version cannot be retreived from certain CUDA supporting video cards with usable CUDA. (Since the driver version can still not be retreived, problems may occur depending on the driver version used. When using CUDA, we recommend you always install the latest version of the driver available from the NVIDIA corporate website.)


TMPGEnc 4.0 XPress Version 4.6.3.268 - December 4, 2008
Fixed CUDA - CUDA usage would not display when at 0%.
Fixed CUDA - A color error would appear when using the video noise filter.
Fixed CUDA - "Simple duplication on stripes only" and "Inverse pulldown (reinforced anti-stripes)" deinterlace mode would not function properly.
Fixed When used in a Core i7 environment, the determination of the number of CPUs would become invalid.
Fixed An error would arise when rotating a picture in the Slideshow editor.


TMPGEnc 4.0 XPress Version 4.6.3.267 - November 19, 2008
Fixed CUDA - The deinterlace filter in Inverse pulldown mode did not yield a correct result when used with CUDA.
Fixed CUDA - The video Noise reduction/Noise reduction (time) filters would sometimes generate horizontal stripes when used with CUDA.
Fixed CUDA - An error would arise when using the Crop filter if the target picture width was below 8 pixels when used with CUDA.
Fixed CUDA - The resize filter in bilinear mode would not yield a correct result when used with CUDA.
Fixed CUDA - The deinterlace filter in "Replication - simple mode" did not yield a correct result when used with CUDA.
Fixed Output settings would sometimes not be correctly reflected in Windows Media Video output.
Fixed A temporary folder was created in random locations such as the desktop and an error would arise during a MPEG-4 2 pass output.
Fixed Using the video fade-in/out filter would slow down the output time.
Fixed Modifying the aspect ratio in the Clip properties would not be taken in account at the output stage when using the PV3 file reader.
Fixed An error would occur and the preview would be black when importing an AviSynth's AVS file.


TMPGEnc 4.0 XPress Version 4.6.2.266 - October 29, 2008
Added NVIDIA CUDA 2.0 support. Can be used with filters and the MPEG-1/2 decoder. CUDA-capable graphics card required. For more information on CUDA, CUDA supported video cards, and downloading the latest drivers, please see NVIDIA's website.
Fixed For AVI codec output quality, keyframe interval and bitrate would not function properly.
Fixed Deadlock could occur when using the VFAPI file reader.
Fixed Green blocknoise could sometimes appear when importing a MPEG-2 PS file through the MPEG file reader.
Fixed Some MPEG file aspect ratios could not be properly determined.
Fixed Imported AAC audio would be delayed by several milliseconds.
Fixed MPEG-2 TS file importation would fail when the stream header contains garbled data.
Fixed An error would occur during the output when joining several clips with different YUV colorspace.
Fixed The MPEG tool would output a LPCM file with a *.tlp extension when demultiplexing.
Fixed Other minor issues have been fixed.


TMPGEnc 4.0 XPress Version 4.5.2.255 - August 11, 2008
Fixed Sequential picture output in JPEG format has been reversed to the YUV colorspace.
Fixed Navigation in the second half of an AVCHD clip would not work properly.
Fixed Processing of pictures with subtitles added would sometimes become invalid.
Fixed When outputting in sequential pictures, certain types of sources would sometimes result in an invalid sample format error.
Fixed Some players would create noises when playing an audio file outputted in MP3 joint-stereo mode.


TMPGEnc 4.0 XPress Version 4.5.1.254 - June 26, 2008
New Includes a Blu-ray (BDMV, BDAV) MPEG-2 output template.
New Includes an AVCHD reader allowing the use of AVCHD sources from a camcorder.
New Can use the Sony AVCHD reader when installed on the application host computer.
Improved Supports full HD output (up to 1920×1080 @ 60 fps) in MPEG-4 AVC/H.264.
Improved Supports pixel aspect ratios other than 1:1 output in MPEG-4 AVC/H.264.
Improved Supports AAC audio (up to 2 channels) input through the MPEG reader. Also supports AAC audio input embedded within an MPEG-2 Transport Stream container.
Improved MPEG file output's Display mode setting offers Progressive (2:2 pulldown) option.
Improved Implemented a solution to correct a loss of CPU usage rate increase occuring when outputting more than one file in WMV format within a Windows Media Player 11 environment.
Improved Supports the WMF picture file format through an embeded WMF decoder.
Fixed Validation system updated to support content-regulated network environment.
Fixed An address violation error and possible application freeze occuring during the output when the source files are imported through the DirectShow reader.
Fixed Application would sometimes not respond when converting a DVR-MS file into a Program Stream.
Fixed FLV1 file would not import properly with some specific CPU environments.
Fixed Project file handling would not be done properly when opening a project file with the "Open a project file" option and manually point the source files not found in the Project.
Fixed An error would arise when starting the editing of a specific mp4 file imported through the QuickTime reader.
Fixed The source framerate could not be obtained properly for a file imported through the QuickTime reader.
Fixed 60 fps data could not be represented properly for a file imported through the QuickTime reader.
Fixed Some parameters were not correctly reflected in the MPEG-4 AVC/H.264 output window.
Fixed Limitations of the Level 2.1 parameters were incorrect in the MPEG-4 AVC/H.264 output window.
Fixed The timestamp correction in the MPEG reader would not function properly.
Fixed The VBV buffer size would be always lower than the maximum when outputting in HDV-HD1 with standard definition.
Fixed Noise could appear when applying the Time tone reduction filter on a monaural audio stream.
Fixed LPCM data information would not be handled properly in an LPCM source imported through the AVI reader when the quantization was different than 16 bit.
Fixed Encoding would sometimes become abnormaly slow when using the Dolby Digital encoder.
Changed Interlace display mode is no longer selectable in the MPEG-4 AVC/H.264 output settings window when in Baseline profile.
Changed MPEG-2 AAC audio format is no longer selectable in the MPEG-4 AVC/H.264 and ISO output audio settings window.
Changed The bitrate default value is automatically calculated based on the framerate, resolution, etc. in the MPEG-4 AVC/H.264 output settings window.
Changed Bitrate buffer size setting has an Automatic option in the MPEG-4 AVC/H.264 output settings window.
Changed Bitrate buffer size setting in kbits instead of bytes in the MPEG-4 AVC/H.264 output settings window.
Changed "Other" tab displayed in the MPEG-4 AVC/H.264 output settings window.
Changed File size and Authoring file size are now displayed in the format setting window when using the DVD, XDVD and BD templates.
Changed BD (25, 50 GB) file size added to the bitrate calculator media type parameter.
Changed File size and Authoring size added to the MPEG Encode/bitrate settings calculator when in DVD, XDVD or BD template output mode.
Changed The Average video bitrate display becomes blue when equal to the Minimum bitrate in the MPEG Encode/bitrate settings calculator.
Changed Calculates the overhead in the MPEG Encode/bitrate settings calculator when in MPEG-2 Transport Stream multiplexing mode.
Changed The "Update batch list file..." and "Save the batch list..." options in the Batch encoder preferences are enabled by default.
Changed "Delete the batch list when completed without error" option added to the Batch encoder preferences.
Changed Colorspace can be set for each codec in the Preferences' AVI settings panel.


TMPGEnc 4.0 XPress Version 4.4.2.238 - January 24, 2008
Fixed Subtitle SRT file importation could fail when the last line was not empty.
Fixed Subtitle SRT file importer now keeps the imported data up to the point where an error occured instead of discarding the whole data.
Fixed When outputting in 1 clip = 1 file mode, the clip number would not display correctly.


TMPGEnc 4.0 XPress Version 4.4.1.237 - December 18, 2007
Fixed Noise appearing when using a QuickTime source file.

Fixed Picture distortion appearing during fast playback of a QuickTime sourcefile.

Fixed An error could appear when outputting in H.264 through QuickTime 7.3.

Fixed Enabling Deinterlace by default could considerably slow the output under specific conditions.

Fixed Memory usage could become too high when processing a large number of projects in the Batch Encode Tool.

Fixed Inconsistencies could appear when using an AVI/Wave audio file in µ-law format.


TMPGEnc 4.0 XPress Version 4.4.0.234 - November 12, 2007
Added Optimized for Intel's Core™2 Extreme QX9650 processor and Xeon 5400 family of processors.
Added SSE4 routines optimization.
Added New text align option in the subtitle layout editor.
Fixed An Invalid Index error could occur in the Slideshow editor after adding a clip.
Fixed Freeze could occur at new clip creation when adding more than 200 pictures in the slideshow.
Fixed Clip reference could be lost during a picture addition in the slideshow, preventing a clip from being accessed for editing.
Fixed Help link corrected within the application.
Fixed Some specific QuickTime file format's framerate could not be retreived.
Fixed Cancelled clip importation from a project would not be removed from a project when such clip could not be found at project loading.
Fixed In HDV output mode, 1720x480/29.97 fps output setting would in fact outputs at 59.94 fps, resulting in an error.
Fixed 4096 bytes of data could disappear during the MPEG tool output.
Fixed Non-outputted project's thumbnail in the batch encode tool would not update when resizing the tool window.
Fixed Could not open wave files bigger than 2 GB.
Fixed When erasing a layout in the subtitle editor, subtitles using a higher ID number would become invalid.


TMPGEnc 4.0 XPress Version 4.3.1.222 - July 12, 2007
Fixed MPEG-4 output could produce an invalid file.
Fixed Including Author and Copyright information in the AVI output could create an unplayable file.
Fixed Using the Time signal reduction filter could cause an application hang-up during playback or output.
Fixed Importing a QuickTime file could cause an application hang-up during framerate analysis.
Fixed Setting a fade-out duration longer than the source file duration could disable the filter.
Fixed Displaying the audio waveform with video that is less than 1 fps could cause a memory access error.


TMPGEnc 4.0 XPress Version 4.3.0.220 - June 27, 2007
New Flash video (FLV1, FLV4) source file format support.
New Displays the picture properties for AVI sources.
Improved 2D/3D Noise reduction filter process speeded-up through multithreading.
Improved MPEG Video decoding.
Improved YUY2 video format resize.
Improved PNG file handling.
Improved QuickTime reader multitrack downscaling to stereo (requires QuickTime 7.1).
Improved QuickTime reader multichannel audio handling (requires QuickTime 7.1).
Fixed Multiple source file importation through DirectShow could cause a memory error.
Fixed Minor fixes.


TMPGEnc 4.0 XPress Version 4.2.10.211 - February 22 2007
New Windows Vista compatibility.


TMPGEnc 4.0 XPress Version 4.2.3.193 - October 18 2006
New Windows Media Player 11 Beta and Windows Media Video 9 Advanced Profile support.
New You are now able to select the display or source size in the Output preview window.
New PV3 HD capture card format is now supported through the PV3 Reader. (Requires the AviUtl plug-in EARTH SOFT DV.aui Ver 2.4.4)
Updated The maximum number of B Pictures is now limited to 3 in the Main profile, following the MPEG-4 AVC specifications.
Fixed You can no longer choose an unauthorized framerate for a specified DivX output profile.
Fixed An error where the aspect ratio of a 4:3 740x480 WMV source displayed as Other (xx) instead of 4:3 has been fixed.
Fixed In the subtitles filter editor, an error which occured when pressing the space bar while no text is selected has been fixed.
Fixed An error which occured when starting the Batch encode tool if QuickTime 7.1.3 is installed has been fixed.
Fixed The appearance of the "An error occured while structuring the clip edit window" warning has been fixed.
Fixed An error where the deinterlace filter in "Replication - simple" and "Replication - animation" mode inverts the lowest field has been fixed.
Fixed An error which may have occured during a picture resize has been fixed, and the the amount of memory used has been reduced.
Fixed Depending the display size, the Overlay display mode added a black line around the picture; this has been fixed.
Fixed Outputting a 16:9 source in PNG or JPG sequential pictures with the keep aspect ratio enabled displayed white top and bottom bars instead of black; this has been fixed.
Fixed Abnormal terminations which may have occured when opening a DVR-MS file with the DirectShow file reader have been fixed.
Fixed Outputting a resized DivX or MP4 while keeping the aspect ratio may have resulted in an abnormal aspect ratio and black framing; this has been fixed.
Fixed Using the DivX reader resulted in false aspect ratio values, framerate values, etc. displaying in the Clip properties window; this has been fixed.
Fixed MPEG-2�A720x480 2.21:1 in the Clip properties window are now correctly recognized.
Fixed DivX file output format non-standard parameters fixes:
--Non-compliant HDTV profile macroblock maximum limit in interlaced and progressive mode has been corrected;
--It is now possible to select an other aspect ratio than 1:1 in Home theatre profile;
--It is now possible to select the bidirectionnal encoding (B frame output) when using a profile with interlaced mode video type;
--It is now possible to select GMC/Quarterpixel search when using a profile;
--You can no longer select a non-compliant audio bitrate;
--A problem with some of the standard audio bitrate value selection has been fixed.
Fixed Miscellaneous fixes.


TMPGEnc 4.0 XPress Version 4.2.3.193 - September 27 2006
New Windows Media Player 11 Beta and Windows Media Video 9 Advanced Profile support.

New You are now able to select the display or source size in the Output preview window.
New PV3 HD capture card format is now supported through the PV3 Reader. (Requires the AviUtl plug-in EARTH SOFT DV.aui Ver 2.4.4)
Updated The maximum number of B Pictures is now limited to 3 in the Main profile, following the MPEG-4 AVC specifications.
Fixed You can no longer choose an unauthorized framerate for a specified DivX output profile.
Fixed An error where the aspect ratio of a 4:3 740x480 WMV source displayed as Other (xx) instead of 4:3 has been fixed.
Fixed In the subtitles filter editor, an error which occured when pressing the space bar while no text is selected has been fixed.
Fixed An error which occured when starting the Batch encode tool if QuickTime 7.1.3 is installed has been fixed.
Fixed The appearance of the "An error occured while structuring the clip edit window" warning has been fixed.
Fixed An error where the deinterlace filter in "Replication - simple" and "Replication - animation" mode inverts the lowest field has been fixed.
Fixed An error which may have occured during a picture resize has been fixed, and the the amount of memory used has been reduced.
Fixed Depending the display size, the Overlay display mode added a black line around the picture; this has been fixed.
Fixed Outputting a 16:9 source in PNG or JPG sequential pictures with the keep aspect ratio enabled displayed white top and bottom bars instead of black; this has been fixed.
Fixed Abnormal terminations which may have occured when opening a DVR-MS file with the DirectShow file reader have been fixed.
Fixed Outputting a resized DivX or MP4 while keeping the aspect ratio may have resulted in an abnormal aspect ratio and black framing; this has been fixed.
Fixed Using the DivX reader resulted in false aspect ratio values, framerate values, etc. displaying in the Clip properties window; this has been fixed.
Fixed MPEG-2�A720x480 2.21:1 in the Clip properties window are now correctly recognized.
Fixed DivX file output format non-standard parameters fixes:
--Non-compliant HDTV profile macroblock maximum limit in interlaced and progressive mode has been corrected;
--It is now possible to select an other aspect ratio than 1:1 in Home theatre profile;
--It is now possible to select the bidirectionnal encoding (B frame output) when using a profile with interlaced mode video type;
--It is now possible to select GMC/Quarterpixel search when using a profile;
--You can no longer select a non-compliant audio bitrate;
--A problem with some of the standard audio bitrate value selection has been fixed.
Fixed Miscellaneous fixes.


4.2.1.188
Compatible with the latest Intel® Core™2 Duo processor


4.1.0.179 Main feature
• H.264/MPEG-4 ISO (for Mobile Devices) support
• High Definition Video Support /template
• 19 audio/video filters
• High Speed Thumbnail Viewing and Scrolling
• Smart Scene Search
• MP3 input/output
• QuickTime output
• Multi core CPU support
• SlideShow creations
• DVD Video Subtitle support


TMPGEnc 3.0 XPress Ver. 3.3.8.117 - Jan 27 2006
Fixed [Project file]: Problem to open a project file, which includes a clip without audio.


TMPGEnc 3.0 XPress Ver. 3.3.7.116 - December 22 2005
Fixed [64-bit Windows]: Output of WMV format, with Windows Media9 Encoder (x64) installed.
*However notice that with this environment, Advance Profile cannot be used. Therefore, interlace outputting is not possible.
Improved [MPEG file reader]: The MPEG file reader now includes a timestamp correction function.
Fixed [MPEG2-TS]: MPEG2-TS with a large amount of Null packets in the beginning couldn't be opened.
Fixed [MPEG Output]: When SSE2/3 was enabled, if [Apply low-pass filter on color channels] was chosen in the "MPEG Output settings", then an address violation error occured.
Fixed [.dvr-ms]: Error "80004005", when importing dvr-ms files (Windows XP Media Center).
Fixed [.dvr-ms]: When importing dvr-ms files (Windows XP Media Center), invalid characters included in the names will be converted.
Improved [MPEG file reader]: It has been optimized so that seeking backward gets smoother.
Fixed [DVD-Video]: when importing a DVD-Video, an address violation error would occur, if several chapter entry points were used for the same frame.
Fixed [DVD-Video]: when importing a DVD-Video, if [Copy selected titles to the hard disc drive] was enable, the audio could'nt be recognized correctly in some cases.
Fixed [DVD-VR]: when importing a DVD-VR, if the beginning of the video was missing, an audio-synch problem would occur.
Fixed [AVI, WMV]: An error occurring when outputting to AVI or WMV with non-standard frame rates.
Fixed [Preview]: After having added video clips with different frame rates, the preview would stop halfway.
Added [CPU]: In the [Preferences]: display of the number of CPU Cores (support for Dual Core processors).
Added [CPU]: In the [Preferences], it is now possible to enable [Use multithread when filtering], in both multiple physical CPUs environment and multiple-core CPU environment.
Fixed [CPU]: In a Pentium 3 Dual Processor environment, if the "CPU Serial Number" was enable, the number of physical CPUs couldn't be identified.
Fixed [Key frames information]: The extension of the output "Key frames information" file, has been corrected from ".key frame" to ".keyframe" (the space between the 2 words has been deleted).
Fixed [Audio Noise Reduction]: When using the Noise Reduction, if "noise prints" couldn't be found, the processing was looped endlessly.
Changed [Audio]: When outputting "ES (Audio only)" in MPEG output, the key frame files won't be output.
Fixed [Output format template]: When loading custom "Output templates" via the [Browse...] button, the template was not reflected correctly.
Fixed [Filter template]: Filter templates made from version 3.0.4.24 couldn't be imported to newer version.
*We recommend you to discard templates that are already damaged.
Fixed [Output file]: In some cases, the output file was overwritten on the original file without prio prompting.
Fixed [Cut-edit window]: Repeated clicking on the seekbar or repeated strokes of the [PageUp] and [PageDown] , caused irregular jumpings of the cursor.


TMPGEnc 3.0 XPress Ver. 3.1.5.82 - March 23 2005
Fixed [Batch Encoder]: Some problems occurring during the Batch Encode have been fixed.
Fixed [others]: Some minor problems have also been corrected.


TMPGEnc 3.0 XPress Ver. 3.1.3.70 - October 18 2004
Added In [Proxy settings]: Input of ID and Password.
Fixed [License Verification]: Some problems have been fixed.
Added [ .dvr-ms]: Supports import of TV recordings ( .dvr-ms files )created with Windows XP Media Center . Metadata (TV show information) can also be imported.
Added [MPEG-2 TS]: Supports import of MPEG-2 Transport Stream (HD video) recorded with Victor GR-HD1 camcorder.
Improved [Windows Media Player 10]: Supports Windows Media Player 10 (including WMV9 Advanced Profile) installed environment.
Fixed [MPEG output setting]: When 3:2 pulldown playback and Output key frame information in a file were chosen, the framerate information was still set to 24 fps.
Fixed [Super Video-CD / NTSC Film]: The Video mode was set to 3:2 pulldown playback and not Interlace.
Improved [MPEG file reader]: It has been optimized so that seeking backward gets smoother.
Added In [Filter - Audio Correction]: Audio Noise reduction, optimized for analog TV broadcasting.
Added [MPEG output - Audio]: For Linear PCM output, the options 96 KHz and 20, 24 bit have been added.
Added [MPEG output - File size]: When the output file size can be calculated, it is displayed.
Improved [WMV output]: Supports the formats Windows Media Video 7 and 8.
Changed [project and template file format]: As new options / parameters have been added, the project file format and template file format have been renewed (the old version files can be still read).
Fixed In [Edit clip]: Problems concerning fast forward and fast backward have been fixed.
Improved [Set Output]: When there were many output format templates, it took time to display them. It takes now less time. However you will need to save them again in the new version format.
Fixed [Encode]: For elementary streams output (e.g. [m2v+wav] ), the overwriting check was not complete.
Changed [Set Output - DVD fomat - audio]: In Channel mode, the option Dual channel has been erased (as it is nonstandard ).
Fixed [PAL format]: When PAL format was chosen for output, video noises could occur in some cases.
Fixed [Audio encoding]: If a multi-channel audio (except 5.1 ch) was converted to another channel mode, an error occured when it was played.
Fixed [Splash window]: In some cases, when opening the program, after the splash window, the program ended.
Fixed [Security Software]: Some Security Softwares could interfere with the program, and it couldn't be launched.
Fixed [Edit Clip - Cut-edit]: If using Windows XP design (Luna) as theme (user interface), the selected portion, in the seek bar, was colorless.
Improved [Key frame list]: Thumbnail display in the Key Frame list has been sped up.
Fixed [Edit Clip - Clip info]: Even if the source was Progressive, it was possible to select the field order.
Improved [Source file]: Reading performance of AVI files with invalid super index has been improved.
Improved [Source file]: Import process for QuickTime Movie files has been .
Improved [Source file]: Decoding process of MPEG2 files has been sped up.
Improved [MPEG output]: Output stream data of MPEG-Video has been adjusted for better compatibility.
Fixed [MPEG output]: In particular conditions, when Apply low-pass filter on color channels was selected, video noises could appear in the bottom part of the footage.
Fixed [WMV output - Video codec]: When WMV9 VCM codec was chosen, all the video was converted in key frames, causing image degradation.
Changed [WMV output - Video Size]: The resolution (pixel size) can be set by units of 4 instead of 2.
Improved [WMV output]: Accuracy for the decision of the initial parameters (progressive / interlace) has been improved.
Improved [Audio encoding]: The encoding for MPEG-1 Audio Layer II has been sped up.
Fixed [Multithread]: When multithread functions were chosen, if during an MPEG encoding the process was cancelled, the system could hang up.
Fixed [Preferences - Batch encode tool export]: Even if it was selected, in some cases it was not operating.
Improved [VFAPI plug-in]: The structure has been modified for better compatibility.


2004.5.19 / Ver.3.0.4.24
First Release Version.