Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.

What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:

Our website is made possible by displaying online advertisements to our visitors. Consider supporting us by disable your adblocker or try DVDFab and copy, convert or make Blu-rays and DVDs! :)

DVD Player Hacks Updated Add
Sony DVP-NS930

12 user region code comments

February 22, 2007 Post region code/hack comment
PostRegion code hack posted by ksaunam, August 17 2003:


The Sony NS-series remote control hack also works for this player, just tested and made mine region-free. Enter 11 22 33 44 55, player says "SUCCESS", and again 11 22 33 44 55.

Search for other NS-series players hacks in here to get further instructions.



PostRegion code hack posted by Alexander, October 22 2003:


I tried 11 22 33 44 55 hack with sony.ccf file and TV Remote installed on IPaq Pocket PC. Nothing happened.
I have region 5 player.



PostRegion code hack posted by James Potkukelkka, November 25 2003:


This code works, but remember to dip the swith to interlaced at the back of your player.



PostRegion code hack posted by Neil McRae, December 29 2003:


I used the PALMOS Omniremote http://dev0_2000.tripod.com/
Took a few goes but it worked! UK PAL model.

Neil



PostRegion code hack posted by Matthias Schmieder, January 09 2004:


codes for the philips pronto or similar:

(Device Code: 26.73 Function: 127)
0000 0068 0000 0015 0060 0018 0030 0018 0030 0018 0030 0018 0030 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 01AE

(Device Code: 26.73 Function: 101-Angle)
0000 0068 0000 0015 0060 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 01F6

(Device Code: 26.73 Function: 85-Video Off)
0000 0068 0000 0015 0060 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 01F6

(Device Code: 26.73 Function: 95-SACD/CD)
0000 0068 0000 0015 0060 0018 0030 0018 0030 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 01C6

(Device Code: 26.73 Function: 21-Power Toggle)
0000 0068 0000 0015 0060 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 020E

It seems, that this remote hack works on all Sony DVP-NS Players!


you´ll have to push the buttons once 1-2-3-4-5 and then after a short time again ->codefree

-------------------------------------------------------
Sorry, but I was not able to verify the codes. Someone should test it and review the results at this forum.



PostOther hack posted by Parker, January 29 2004:


What about UOP setting to OFF?



PostRegion code hack posted by JHS, February 23 2004:


Here is how I got it region free after several tries.

If you have tried add hack code from http://dev0_2000.tripod.com/, you should reset your player from display menu(choose setup and reset), after reseting press clear so setup program does not run. Shutdown your player from Sony's remote control. Press 1,2,3,4,5 and player shows "SUCCESS", then press 1,2,3,4,5 again and player will shutdown. In the back of player my dip setting was Selectable.

I think main reason why adding region hack failed was that I had some settings already in sony's memory.

I hope those who has not succeed yet.



PostRegion code hack posted by marcush, May 11 2004:


function of the remote from the DVD player (it doesn't matter which functions you train, for example Play).

Export this category out of OmniRemote into the Memopad of the PDA. Sync your PC and PDA. Go into your PDA software on the PC and open the exported category file. The code that worked for me is found on these forums (see below):

Button name-1
0000 0068 0000 0015 0060 0018 0030 0018 0030 0018 0030 0018 0030 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 01AE
Button name-2
0000 0068 0000 0015 0060 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 01F6
Button name-3
0000 0068 0000 0015 0060 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 01F6
Button name-4
0000 0068 0000 0015 0060 0018 0030 0018 0030 0018 0030 0018 0030 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 01C6
Button name-5
0000 0068 0000 0015 0060 0018 0030 0018 0018 0018 0030 0018 0018 0018 0030 0018 0018 0018 0018 0018 0018 0018 0030 0018 0018 0018 0030 0018 0030 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 0018 0018 0018 0030 0018 0018 020E

Now replace the series of numbers found under each Button name in the exported category file with the codes listed above (just simply copy and paste the new code).

Now sync your PDA and PC again to copy the edited file back to the PDA.

Import the category file back into OmniRemote. The buttons you made initially should now contain the hex code.

Make one more button in OmniRemote and train it with the Power On/Off function of the DVD remote. Use this button to see if you have your PDA aligned correctly and that you are using the right distance to the DVD player in order to send signals from the PDA. If you can switch the DVD player on and off with the OmniRemote button keep your PDA in this position to send the other codes.

Now press the buttons in exactly this order 1,1,2,2,3,3,4,4,5,5 (you have to press the buttons twice, pressing them only once did nothing on my player)

The player should display SUCCESS in the display window and power on.

Now repeat the sequence from above 1,1,2,2,3,3,4,4,5,5 and the player should power down.

After switching it on again, my player was region free.



PostRegion code hack posted by marcush, May 12 2004:


My apologies, for some reason the first part of my post got sliced off. Here is how it starts:


I could not get the hack found on http://dev0_2000.tripod.com/ to work with my Sony DVP-NS930V. Maybe my model (purchased in May 2004) has a new firmware on it, I don't know the exact reason.

What did work for me to make it region free is detailed below:

Tools used:
Sony Clie TG-50
OnmiRemote software

I made a simple interface with 5 buttons in OmniRemote, trained those buttons once with any function of the remote from the DVD player (it doesn't matter which functions you train, for example Play).



PostRegion code hack posted by erntebrot, October 16 2004:


region code hack for NS 330 posted by maca5631 feb. 15th 2004
W O R K S for NS 930
tried and tested october 15th 2004 with all-in-one-remote URC 7562



PostRegion code hack posted by Edward, March 20 2006:


I used the One-For-All 4 (URC-7740) remote to make my Sony DVP-NS930V region free. Just follow the steps below.

First, prepare the following (this makes sure your remote is configured for your sony DVD player):
1. Press the DVD button on the remote
2. Press and hold the magic button until the led flashes twice.
3. Enter the device code 0533

Now we need to program buttons 1 till 5 with the following codes, read below for instructions:
1 - 00189
2 - 00255
3 - 00095
4 - 00221
5 - 00079

This is how you program those numbers on the buttons 1 till 5 of the remote:
1. Hold magic button until the led flashes twice.
2. Press 994.
3. Press magic once (don't hold).
4. Enter 5 digit code from above.
5. Press button (1 till 5) where to program it, the led should flash for a longer period of time now. This indicates that the button has been programmed.
6. Repeat steps 1 to 5 for all keys.

Now, the actual hack of the DVD-player:
1. Remove disk, put player on standby.
2. Press 1,2,3,4,5 - SUCCESS is displayed and player starts up.
3. Press 1,2,3,4,5 - player shuts down and BINGO!

I can now play any region 1 and 2 DVD with or without RCE.



PostRegion code hack posted by Sony-dude, February 22 2007:


I used a hack described here:
http://www.selen.org/sonydvd.html

However, I used the IrDA port on my laptop and I thus want to add som extra comments here, sharing the success! :))

- Downloaded the winsamp software found here (thanks for an excellent software!):
http://www.veg.nildram.co.uk/remote.htm
- Downloaded the "remote.txt"-file found here:
http://www.selen.org/files/REMOTE.TXT

- I used my notebook's infrared port to transmit the IR-signals. Just be sure that the IrDA-port is activated (I hade to do this in the BIOS setup), no extra drivers needed on my OmniBook notebook.
- I transferred the program to a bootable floppy disk and rebooted the laptop with the disk.
- I had to run the command "winsamp c4", to start the program with the COM 4 port as the active port. No other ports seemed to work. It was not possible to use the COM 4 port in windows, only COM 3, so you have to do this from MS-DOS with the floppy!
- In addition, be sure to reset your DVD-player (display meny - setup - reset), otherwise you might nok succeed. In addition I had the SCAN SELECT button in "interlaced" mode. I am not sure if this is important, but just in case...

- Finally, when the DVD player was turned off with the remote, with no DVD in the tray, and with the "winsamp" program running on the computer, I imported the "remote.txt" file by pressing "r" on the keybord. The "buttons" 1-5 should then be filled with coding.
- Then, press the "buttons" 1-5 in the winsamp program by hitting the enter button on the computer with the infrared port directed to the DVD player, and the cursor to switch between the "buttons". After hitting the 5-button, wait for the "succeed"-message on the display (should appear after a second or two). Then press "buttons" 1-5 once more, and the DVD turns off after pressing the 5-"button".

- Now, my Sony DVD-NS930V are able to play at least both region 1 and 2, which originally was coded for region 2. Wheter other regions works as well, I don't know.

Thanks to other hack information that helped me! I hope I help others that want to use their laptop IrDA port with this message, du to that I had some trouble myself, figuring out how to use the IrDA port right. Good luck!




1 DVD Hack hits, Showing 1 to 1 DVD Hacks
   

New hacks = New region code/hack comments since your last visit.
Search   Contact us   Privacy Policy   About   Advertise   Forum   RSS Feeds   Statistics   Software   

Site layout: Default Classic Blue

Affiliates: free-codecs.com

©1999-2019 videohelp.com