What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
| DVD Player | Hacks | Updated | Add |
| Sony DVP-NS765P | 2 user region code comments |
May 30, 2005 | Post region code/hack comment |
 Region code hack posted by seppfett, November 02 2004: | |||
Works with PDA and TV Remote control software that can be programmed with .ccf files. It is the same .ccf file as is being used for most of the other Sony DVD players and can be found in this forum (e.g. for the NS900). Only different trick with this one is that the five numbers need to be pressed while the system is switched on AND the DVD tray is open. You have to press the numbers in the following sequence: 1, 1, 2, 2, 3, 3, 4, 4, 5, 5. You will then see in the display "success" and the player will be region free. I just did it with my region 2 player! Good luck, Seppfett | |||
| Region code hack posted by Tomas, May 30 2005: | |||
I have successfully applied the Hack below posted by Ross on my DVP-NS765P. I tried the Laptop-IR hacke, couldn't get it to work, this hack if you have a kameleon is sweet :-) Region code hack posted by Ross, November 16 2003: You might also like to try this method, which worked for my NS-300, if you have a One4all remote control. This is quoted from http://www.regionfreedvd.net/player/sony.html -- I used oneforall kameleon remote to make my ns705 region free. just follow these steps: prepare: 1. select dvd device on remote 2. hold magic button until rabbit comes out 3. enter device code 0533 program buttons 1..5 with the following codes: 1 - 189 2 - 255 3 - 095 4 - 221 5 - 079 1. hold magic button until rabbit comes out 2. press 994 3. press magic 4. enter 3digit code from above 5. press button (1..5) where to program it 6. repeat steps 1 to 5 for all keys. have it a go: 1. remove disk, put player on standby 2. press 1,2,3,4,5 - success is displayed and plyer starts up 3. press 1,2,3,4,5 - player shuts down and BINGO! should work for most of the dvp-ns### players" -- I used a different One4all and it worked fine on the first attempt. The LED flashes twice on other One4all remotes instead of the rabbt appearing. Hope this helps. Ross | |||
| 1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!