What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
| DVD Player | Hacks | Updated | Add |
| Samsung DVD-M205 | 12 user region code comments |
February 10, 2003 | Post region code/hack comment |
 Region code hack posted by Blotza, July 27 2001: | |||
same as Samsung models 511, 611, 711 and 911. should work also for M105, M305, etc... | |||
| Region code hack posted by Dusky2, August 26 2001: | |||
Region free hack for the Samsung DVD M205 *Turn on your T.V. *Turn on your DVD *Press the OPEN/CLOSE button on the DVD-player *Press on the REPEAT-button on your remote *Press 38767 on your remote (02 disapear on your t.v. screen) *Press 9 on your remote control(press it when 02 disapears) (9 disapear on your t.v. screen) *Press the OPEN/CLOSE-button on your remote *Press the STANDBY-button on your remote And your Samsung DVD M205 DVD player is now permanet region free, you don't have to do it again. | |||
| Region code hack posted by john wessels, September 16 2001: | |||
Region free hack for the Samsung DVD M205 *Turn on your T.V. *Turn on your DVD *Press the OPEN/CLOSE button on the DVD-player *Press on the REPEAT-button on your remote *Press 38767 on your remote (02 disapear on your t.v. screen) *Press 9 on your remote control(press it when 02 disapears) (9 disapear on your t.v. screen) *Press the OPEN/CLOSE-button on your remote *Press the STANDBY-button on your remote And your Samsung DVD M205 DVD player is now permanet region free, you don't have to do it again. | |||
| Region code hack posted by Ben Taylor, September 24 2001: | |||
Regional hack for Samsung M205 ALWAYS PERFORM A COLD START BEFORE APPLYING THE HACK BELOW. 1. Power on your player. 2. Press and hold both the play and the stop buttons on the player. 3. After a short while you should be presented with a set of language options. Release the play and the stop buttons on the player. 4. You will now need to select a language option between 1 and 6. 5. Press the repeat button on your remote control. 6. Using your remote control enter the code below, note that you must know what Region your player is currently set to in order to know which sode is appropriate. * for Region 1 use 2,9,3,3 and 4. * for Region 2 use 3,8,7,6,and 7. * for Region 3 use 5,6,7,3 and 2. * for Region 4 use 7,6,8,8 and 4. * for Region 5 use 5,3,8,1 and 4. * for Region 6 use 2,4,4,6 and 2. 7. A code should be displayed on the screen indicating the current Region setting of your unit. 8. Press the 9 button on your remote for Region free, or press 1 button for Region 1, button 2 for Region 2 and so on. 9. Press the open button on your player. 10. Press the standby button on your remote control. (If the player sticks on FBI warning screens,then press forward search x2 or faster, the disc should skip straight to the main feature.) | |||
| Region code hack posted by Dusky2, October 07 2001: | |||
Region free hack for the Samsung DVD M205 *Turn on your T.V. *Turn on your DVD *Press the OPEN/CLOSE button on the DVD-player *Press on the REPEAT-button on your remote *Press 38767 on your remote (02 disapear on your t.v. screen) *Press 9 on your remote control(press it when 02 disapears) (9 disapear on your t.v. screen) *Press the OPEN/CLOSE-button on your remote *Press the STANDBY-button on your remote And your Samsung DVD M205 DVD player is now permanet region free, you don't have to do it again. | |||
| Region code hack posted by SC, December 25 2001: | |||
Regional hack for Samsung M205 (Region 2-> Multiregion, firmware 5.02Ee). The other codes don't seem to work with this new firmware (I bought mine in Dec. 2001) 1. Power on your player. 2. Press and hold both the play and the stop buttons on the player. 3. After a short while you should be presented with a set of language options. Release the play and the stop buttons on the player. 4. You will now need to select a language option between 1 and 6. 5. Press the repeat button on your remote control. 6. Using your remote control enter the code below, note that you must know what Region your player is currently set to in order to know which sode is appropriate. * for Region 2 use 57538 instead of 38767 ! 7. A code should be displayed on the screen indicating the current Region setting of your unit. 8. Press the 9 button on your remote for Region free, or press 1 button for Region 1, button 2 for Region 2 and so on. 9. Press the open button on your player. 10. Press the standby button on your remote control. | |||
| Region code hack posted by Baron, February 27 2002: | |||
Need remember, that a remote control of Samsung DVD M205 have a two button "RESUME", for succsesful hack need to press button "RESUME A-B". | |||
| Region code hack posted by Jalla, March 15 2002: | |||
Here is a little supprise for you....The key is the SETUP button. NOT the Repeat, Repeat AB button...... At least that's what I discovered yesterday when I tried to make my DVD regionfree..........I tried at least ten times, before I discovered that I had to press the SETUP button instead of the Resume button... This is the way to make it regionfree.... 1. Power on your player. 2. Press and hold both the play and the stop buttons on the player. 3. After a short while you should be presented with a set of language options. Release the play and the stop buttons on the player. 4. You will now need to select a language option between 1 and 6. 5. Press the SETUP button on your remote control. 6. Using your remote control enter the code below, note that you must know what Region your player is currently set to in order to know which sode is appropriate. * for Region 2 use 57538 7. A code should be displayed on the screen indicating the current Region setting of your unit. 8. Press the 9 button on your remote for Region free, or press 1 button for Region 1, button 2 for Region 2 and so on. 9. Press the open button on your player. 10. Press the standby button on your remote control. Voila......It worked for me.......... | |||
| Region code hack posted by nunomiranda80, June 10 2002: | |||
For my player it was a little bit more simpler: 1. Turn on your T.V. 2. Turn on your DVD 3. Press the Repeat Button (not the Repeat A-B Button) 4. Using your remote control enter the code below, note that you must know what Region your player is currently set to in order to know which code is appropriate. * for Region 2 use 57538 5. A code should be displayed on the screen indicating the current Region setting of your unit. 6. When it disappears press the 9 button on your remote for Region free, or press 1 button for Region 1, button 2 for Region 2 and so on. 7. Press the standby button on your remote control. | |||
| Region code hack posted by nunomiranda80, June 29 2002: | |||
In the last cracker is one step missing. Here it is the complete step list: 1. Turn on your T.V. 2. Turn on your DVD 3. Press the Repeat Button (not the Repeat A-B Button) 4. Using your remote control enter the code below, note that you must know what Region your player is currently set to in order to know which code is appropriate. * for Region 2 use 57538 5. A code should be displayed on the screen indicating the current Region setting of your unit. 6. When it disappears press the 9 button on your remote for Region free. 7. Press the open button on your player. 8. Press the standby button on your remote control. | |||
| Region code hack posted by MEGATONE, January 05 2003: | |||
After trying many times with all the hacks suggested here and anywhere else that's how I've been able to get finally my R2 M205 Region Free: 1) Unplug and plug back power supply 2) Power - from Remote Control 3) Repeat - from R.C. (don't confuse it with the "Repeat A-B" button, it is exacly by its side) 4) 57538 - a 02 appears 5) 9 - from R.C. 6) Open/Close - from R.C. 7) Power - from R.C. after 15 secs (don't know how time is important) | |||
| Region code hack posted by Gavin Williams, February 10 2003: | |||
Regional Hack For Samsung M205 ALWAYS PERFORM A COLD START BEFOE APPLTING HACK BELOW!!!!!!!!!!! 1.Press the power button on the DVD player(with NO disc in the DVD player) 2.Press and hold both the play button and the stop button when the player reads “no disc” 3.After a short while you should be presented with a set of language options 4.You will now need to select between 1 and 6 5.Press the repeat button on your remote control 6.Using the remote control enter the following code (this is for region 4 users only!!) 76884 7.Press the 9 button on your remote control for region free! 8.Press the open button on your remote control 9.Press the stand by button on your remote control; your DVD player should now be region free! And you don’t have to do this again! (Note: if you press the play and stop button on the player or leave the Player unplugged for a long period of time after performing this task you will have to do it all over again!!) | |||
| 1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!