Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.

What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:


DVD Player Hacks Updated Add
Samsung DVD-HD1080P7

23 user region code comments

May 04, 2009 Post region code/hack comment
PostRegion code hack posted by Maiku, June 10 2007:


I've bought one from Australia and tried out the hack from region 4 that is mentioned for the DVD-HD860 found at the link below and it worked

http://www.videohelp.com/dvdhacks/samsung-dvd-hd860/6897#25699



PostRegion code hack posted by imutau, June 16 2007:


Just bought this DVD player at Best Buy (Region 1 USA)and can confirm this hack doesn't work or I'm doing something wrong.

Probably will take it back.



PostRegion code hack posted by wnijen, June 17 2007:


This hack comes from a Samsung HD870 hack and works for a Samsung HD1080P7 region 2 player:

This works with the Samsung remote supplied with the DVD player.

Turn on the Player with no disc on the tray. The tv screen and the dvd lcd will display "No Disk"

2. Press the "Repeat" key on the Samsung remote control

3. Press the keys: "5 7 5 3 8" on the remote. Number 2 appears on the screen for a short time.

4. Press "9". Number 9 is displayed on the screen.

5. Press the "Open/close" button in the remote. The tray will open. Leave it open for a few seconds.

6. Just press the "On/off" button in the remote.

7. You now have a multi-region dvd player!!






PostRegion code hack posted by drayss, July 01 2007:


Just bought this DVD player at Best Buy (Region 1 USA)and can confirm this hack doesn't work for me. I did everything exactly right and still...
Any idea?
I still have a month to return it. Hope for help!



PostRegion code hack posted by D C, July 14 2007:


Just bought one today, firmware info 04.28.07.02 (with more #s afterward).

All hacks mentioned did not work with the included remote.

Will try one of the remote brands specified by other users but am expecting no miracles... :(



PostRegion code hack posted by Rodrigo, July 18 2007:


Hi, Rodrigo from Brazil here! (Region code 4)
I bought mine yesterday and applied this hack succesfully:

-Turn on (on the remote)
-Wait until appears "no disc"
-Open and shut the tray
-Wait for "no disc" again
-Press REPEAT on remote
-Press 76884 on remote (for region 4. I guess that to other regions the codes below**** will apply)
-When appears the number 4 on TV screen, press number 9 on remote
-Press ENTER

Now you have a region free player!

****Codes for other region players:
R1 - 29334
R2 - 38767
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462

So for example if you have an R2 player, press REPEAT-3-8-7-6-7.




PostRegion code hack posted by Bucko, July 28 2007:



I am in New Zealand (Region 4) and just bought htis player not knowing that it was region locked.

I juts followed Rodrigo's hack (dated 18th July) using the code for Region 4 (76884) and it worked like a dream!



PostRegion code posted by Meep, August 11 2007:


Can someone confirm Rodrigo's hack for the R1 player?



PostRegion code hack posted by Eric, August 16 2007:


I have confirmed that for region 1 (USA) player with newer firmware version disabled the region hack; so all the hacks out there will not work for R1 (USA) player. The newer version starts with 0505 something, don’t remember the version #. The one starts with 04 is old version. I hope someone can find way to hack for USA region.



PostRegion code hack posted by Ambush Greentree, September 05 2007:


HI, my name Siera from Indonesia. After doing suggestion from Rodrigo finaly my player is region all, not anymore only region 3. I can enjoy DVD Star Wars II from Region 1. Amazing!



PostRegion code hack posted by andyB2, November 25 2007:


Hi
Sad to say non of the hacks that I can find, including all above, work for the DVD-1080P7 region 1 bought in the USA. With the draw open and I press info it's version 052107.05.1080P.

I'll keep searching for one that works.
Andy




PostRegion code hack posted by BosGuy, December 30 2007:


The code mentioned in this forum works. Make sure that you select the Repeat button and not the Repeat A-B button. I tried several times until I realized there are 2 Repeat buttons on the remote. The code worked instantly the moment I used the right button. This was a firmware version 5.x



PostRegion code hack posted by fabdum, January 05 2008:


This hack is not working on my player (region 1 / firmware 052107.05.1080PHNXEXAA even with the "repeat" button
BosGuy, do you have the same configuration ?
Thanks



PostRegion code posted by ego1oge, January 12 2008:


Hello, I am also suffering from the region 1 problem. It didn't work for me either. I just got this for xmas. I tried the repeat method, and what happened was the region number didn't even show up after punching in the number sequence.

My firmware version is 071807.07.1080PHNXEXAA.

Is it possible to just download the old firmware onto a disc and "downgrade" the firmware of the dvd player? Just a thought, I'm kinda new to this so bear with me here.

Good luck to everyone with this problem!



PostRegion code hack posted by alexanderi, January 13 2008:


Turn on the Player with no disc on the tray. The tv screen and the dvd lcd will display "No Disk"
2. Press the "Repeat" key on the Samsung remote control
3. Press the keys: "5 7 5 3 8" on the remote. Number 2 appears on the screen for a short time.
4. Press "9". Number 9 is displayed on the screen.
5. Press the "Open/close" button in the remote. The tray will open. Leave it open for a few seconds.
6. Just press the "On/off" button in the remote.
7. You now have a multi-region dvd player!!
*This hack is already in the forum but please note you must use the "Repeat" key. Not the "Repeat A-B Key" the are next to each other and if you use the wrong one by mistake you need to turn off and on again. It does work.




PostRegion code hack posted by alon, January 13 2008:


will someone who succeded hacking post also his firmware code (to know if the new devices with firmware starts with 5 are also hackable)?

thanks,

Alon



PostRegion code posted by uncleyim, January 14 2008:


My firmware is starts at 3 and producted on June 2007. But I still can't make it code free. My player is region 1.



PostRegion code posted by gmgdnj45, January 26 2008:


This is in response to ego1oge.

See this post for firmware change. It takes you to another forum with instructions. It was performed for the Samsung DVD-HD870. Maybe it will work for this unit as well.

"Region code hack posted by Rog, September 16 2007:"
http://www.videohelp.com/dvdhacks/samsung-dvd-hd870/8213#27919

Hope it helps.



PostRegion code hack posted by sheldon165, May 01 2008:


any news. i'm still looking for that hack but wit hregion it still doesn;t work



PostRegion code hack posted by vihkr, May 10 2008:


RE: Region code hack posted by wnijen, June 17 2007:
This hack comes from a Samsung HD870 hack and works for a Samsung HD1080P7 region 2 player.

This works on my Region 2 UK purchased player. Verified.




PostRegion code hack posted by freddy1221, July 18 2008:


I am interested on getting a HD1080P7 Region 1 and try to make it Region Free. So, I have a suggestion to those who have access to Region 1 and have not been able to make it Region Free.
Have you tried downloading the firmware update from another region (let's say from UK for Region 2) and upgrade your Region 1 player? Then, could you try applying the hack afterwards?

If you have done that, please provide feedback on the result.

Thanks.



PostRegion code hack posted by Kevin Cushion, February 16 2009:


DVD-1080P7 model with 050407.04.1080PHNXEXAA firmware. All region code options tried with no luck? Can anyone assist with this model/firmware combination with a region code that works?



PostRegion code hack posted by przypadek, May 04 2009:


For region 1
Go to europe web and donwload firmware.
Open it and open BUILD file.
EXChange two last lines.
ORGINAL LINE 4e584558454700000000000000000000Fc
EXCHANGED LINE 4e584558414100000000000000000000F4
copy change files to cd-r and insert to dvd press enter and do not anything just wait. DVD will updatting open and close tray and turn off itself .
Turn on select language turn off.
Turn on and follow steps:


This works with the Samsung remote supplied with the DVD player.

Turn on the Player with no disc on the tray. The tv screen and the dvd lcd will display "No Disk"

2. Press the "Repeat" key on the Samsung remote control

3. Press the keys: "5 7 5 3 8" on the remote. Number 2 appears on the screen for a short time.

4. Press "9". Number 9 is displayed on the screen.

5. Press the "Open/close" button in the remote. The tray will open. Leave it open for a few seconds.

6. Just press the "On/off" button in the remote.

7. You now have a multi-region dvd player!!

GOOD LUCK ;)




1 DVD Hack hits, Showing 1 to 1 DVD Hacks
   

New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!
Search   Contact us   Privacy Policy   About   Advertise   Forum   RSS Feeds   Statistics   Software   

Site layout: Default Classic Blue

Affiliates: free-codecs.com

©1999-2024 videohelp.com