Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.

What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:


DVD Player Hacks Updated Add
LG 5083

5 user region code comments

May 27, 2005 Post region code/hack comment
PostRegion code hack posted by Nuno Miranda, July 19 2002:


This is the multiregion Hack for the DVD-5000 Series LG DVD Players.

Follow this instructions exactly:


Step 1

Download the file lg5000.zip by clicking on the link:

http://www.area450.co.uk/images/LG5000.zip

(If you have any problems downloading the file e-mail me and i will send it to you: nunomiranda80@hotmail.com)


Step 2

Unzip the file lg5000.zip. It will create a directory folder called RMTM0000.


Step 3

You need a CD Writer to write a new disk with the files you've just unziped (RMTM0000 folder).


Step 4

You need a CD burning software (like Easy CD Creator, Nero, CD Clone, HP RecordNow, etc....) to make a Data disc.


Step 5

I've read not to use a 700mb capacity CD-R, but mine worked just fine! For information, I used a Memorex CD-R 700MB 24x. This speed (24x) I think is the key to success, not the capacity or size of the CD-R.


Step 6

Using the CD burning software, create a Data disc and add the directory folder RMTM0000. That's all you need !
*** When burning the disc do not use DirectCD ***


Step 7

Switch "On" your DVD player and TV and insert the newly burned disc. When prompted select "0" for multiregion and then ENTER. Power off and... it's done!

Good Luck!



PostRegion code hack posted by hack, October 07 2002:


http://www.area450.co.uk/lg5083hack.htm



PostOther hack posted by g-man1, December 22 2002:


Vcd hack as by other players.
1. Power on the player with no disc in the drive.
2. Press Pause on the remote control.
3. Using the remote control, key in the following: 1, 4, 7, 2 (the
characters 01 47 should appear on the display) [If your player is a non UK
model, this number will probably be different - don't worry]
4. Press the UP arrow three times (the characters 04 Fd should appear on the
display)
[This number may be different depending on the configuration of your
specific model - don't worry]
5. Press Program, 6, Program, 5 (the characters 04 FE should now be
displayed).
6. Press Enter (the display should flash briefly).
7. Press Return.
8. Power the player off and then back on.
9. Play a VCD!

This hack was copied off someone elses on this site, searched and found it thanks very much,thought it should be posted here as i have just used it on mine and works fine, but would love another one for svcd etc.



PostRegion code hack posted by Gary Sim, February 15 2004:


MULTI REGION AND VCD HACK



1. Wait until the message "no disc" or "region coding error" appears before you proceed to step 2. You only have a second or two to enter the code below.
2. Press PAUSE, ENTER, 3, 1, 4, 1, 5, 9 on the remote control.
3. Press 0 for region-free, 1 for region 1, 2 for region 2, etc.
4. Press PAUSE on the remote control.
5. Power off the player for few seconds.
6. Power on the player.
Firmware Check:

1. Press Setup button on the remote control.
2. Select TV Aspect.
3. Place the cursor on 16:9 wide.
4. Using the remote control, key in the following: 1, 3, 9, 7, 1, 3, 9.
5. Press Enter on the remote control.
6. Press "SETUP" to clear the information once read.



VCD Enable:

NOTE: This hack should ONLY be used on the following players which have been confirmed elsewhere on the Net. That said, I still cannot take responisibility for things going awry. Try at your own risk!!!

The 'confirmed' players that survive the following hack are:

DVD-2330P, DVD-3000E, DVD-3350/1/E/C (and clones), DA-3520, DVD-4210, DVD-4710, DVD-4730, DVD-4750, DVD-4830, DVD-4950, DVD-5083. DVD-3200E models with firmware above version 1.0 (not including it!) may work. This model has had the most trouble recently, as the hack works, but leaves you with no picture for playback on DVD at the very least! Be warned!!!

1. Power on the player with no disc in the drive. If the hack doesn't work, press Stop on the remote before step 2.
2. Press Pause on the remote control.
3. Using the remote control, key in the following: 1, 4, 7, 2 (the characters 01 47 should appear on the display) [If your player is a non UK model, this number will probably be different - don't worry]
4. Press the UP arrow three times (the characters 04 Fd should appear on the display)
[This number may be different depending on the configuration of your specific model - don't worry]
5. Press Program, 6, Program, 5 (the characters 04 FE should now be displayed).
6. Press Enter (the display should flash briefly).
7. Press Return.
8. Power the player off and then back on.
9. Play a VCD!

One possibility that may get non-working players working again is to try and back-step what you done in the above steps, but seeing as you will working blind, then it may be rather hard work, if not futile. Another possibility is to use the firmware display hack, listed above.

This has the effect of resetting certain TV out aspects, which may help you get your DVD working again.

Another way is possibly the 'blind method' to set S-video for TV output:

1. Power on the DVD without a disc in the drive.
2. Wait for the No Disc illumination on the LED.
3. Press Setup on the remote control.
4. Press Down seven times slowly on the remote control.
5. Press Right, then Up, then Enter on the remote control.
6. The screen should come back on.





PostOther hack posted by jeffrey, May 27 2005:


vcd
svcd




1 DVD Hack hits, Showing 1 to 1 DVD Hacks
   

New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!
Search   Contact us   Privacy Policy   About   Advertise   Forum   RSS Feeds   Statistics   Software   

Site layout: Default Classic Blue

Affiliates: free-codecs.com

©1999-2024 videohelp.com