What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
6 user region code comments
|April 11, 2004||Post region code/hack comment|
|Region code hack posted by qubit, January 02 2003:|
i) Download the .zip file from the following location:
ii) Unzip the file then burn the folder 'RMTM0000' to a CD-R making sure that the directories stay in order.
iii) Insert the disk into your player, you will then be presented with a region change menu.
iv) Select desired region (0 for all regions).
Though the file states it's for the LG 5000 series, LGRegionFree says it will work on any LG 'DA' model.
I have tested this on my 3620 and it works fine.
|Other hack posted by Roberto, March 26 2003:|
to play VCD use the same hack of DA-3520. Work fine...
|Other hack posted by jayjay, April 30 2003:|
VCD and SVCD enable hack.
The VCD enabling guides that circles around the NET is IMO very badly written.
There is also a SVCD hack, that has some flaws, and can give you green picture if you're using a SCART cable (which the 3620 doesn't have, but other 5xxx models does).
You're enabling VCD and SVCD compatibility using the built in PROM editor.
NOTE! fiddling with your PROM might render your DVDplayer useless. Read the instructions carefully, and I will not be responsible for any damage you might cause. This hack should apply to all LG (and aiwa) DVDplayers that the VCD hack and SVCD hack works with.
for VCD, you're changing the byte at position 04. BUT, do not change it to FE as told in many guides, cause then you might loose some functionality that you might want. instead, take your original value (in my case it was CC), convert it to a binary value (1100 1100), then change the 2:nd bit from the right to 1, which gives you (1100 1110) CE. now, edit your PROM and set it to CE (program 3, program 5, enter).
For the SVCD hack, you edit the byte at position 07. With my player, it was default 00, it probably differs on different players. Now, convert to binary (0000 0000), and edit the 5th byte from the right, and switch it to 1 (0001 0000). Now, this gives you 10, now edit your PROM to 10 (1, 0, enter).
NOTE! the numbers I have used, are MY defaults only. you should use your own default values, and modify these according to my instructions, in fact, just change the bits that control VCD and SVCD.
Restart your DVD player, and enjoy your VCD and SVCD, probably with great picture, even with SCART!
|Region code hack posted by Porter, August 17 2003:|
lg 3520 hack is not working on my 3620
|Other hack posted by Roberto, November 16 2003:|
I have hacked my lg 3620 for SVCD and VCD replacing 04 and 07 prom cell with FE values.
now it play VCD and SVCD .....
The hack work on my player LG DA3620
|Region code hack posted by wim, April 11 2004:|
|1 DVD Hack hits, Showing 1 to 1 DVD Hacks|
= New region code/hack comments since your last visit.