What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
2 user region code comments
|November 23, 2005||Post region code/hack comment|
|Region code hack posted by qvottrup, July 28 2005:|
Upgade firmware to v. 1.15 (download from http://www.kiss-technology.com/?p=updates&v=users)
Open the CD drawer
Press on the remote: CLEAR, then key's 2-7-6
A hidden menu will come up displaying all sorts of spec about the unit.
2 Options are available to change.
CD-ROM spped: Don not change
REGION: Change setting to "ALL", then click OK/ENTER
|Region code hack posted by Dave Long, November 23 2005:|
First press the Set-Up button on the remote. On screen, top left you'll see the firmware version. If you've got 1.1.4 you'll need the upgrade from the KiSS support site. Load that 1.1.6 upgrade onto a cd using Nero Express ONLY. Pop the disc in the 1100 and you'll see a short message. Power down the unit by removing the AC plug while the disc is still in the unit. Replace the AC, power up with remote if need be and you'll see the directions on screen. Do the full install. It'll let you know when it's done. Take the disc out, let the drawer go back in. Again power down the unit with the AC, plug back in, when you see the KiSS logo, open the drawer. Now press the CLEAR button followed by 276. Change the region code to ALL but don't muck with anything else. Exit out, close the drawer and one last time, power down the unit with the AC, plug back in and you should be OK. THis last power down/up is really necessary because otherwise, the picture pops in and out and changes contrast on the fly. Make sure all these power down/ups are done by unplugging the unit NOT just using the remote to place it on stand by. This all worked for me fine but only after a lot of playing around.
|1 DVD Hack hits, Showing 1 to 1 DVD Hacks|
= New region code/hack comments since your last visit.