Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.

What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:

Try DVDFab and remove iTunes protection, copy, convert or make Blu-rays and DVDs! Download free trial !

DVD Player Hacks Updated Add
Aiwa HV-DH1

2 user region code comments

May 31, 2004 Post region code/hack comment
PostRegion code hack posted by Andy Rigg, January 13 2003:

This is not a Firmware upgrade as such it is just using software to enable Multi Region, this was picked up from the Toshiba SD-42HK which must use the same hardware.
This works 100% on the Aiwa.

Go to this site

And download the zip file.
Extract the zip and burn the file onto a CD.
Load the CD into the player and select region 0
Switch off and back on.

PostRegion code hack posted by davewatson, May 31 2004:

dvd\vhs combination

Multi region hack

1. Go to and download file.
2. Make a temp folder. Extract the contents into the folder you created using Win-Zip. It will create a folder called RMTM0000 plus a read me file.
3. Insert a blank CD-R and using Nero or other copying software (make data cd) Burn at 24x. Donít use direct cd and donít split up the RMTM0000 folder. (file only 5MB when unzipped) if you have done it right you will have a folder called RMTM0000 and read me file on cd. This is all you want.
4. Turn on your TV and DVD. Select station on your TV that you watch your dvds and videos on and make sure that dvd is selected on your Aiwa HV-DH1.
5. Insert the disk into the dvd player you just made, wait for about 20 to 30 seconds and a blue screen will appear with region management test mode. Using your remote press 0 for multi region. Press ok, wait until disk tray opens, remove disk then power off. Turn back on after 10 seconds.
6. You can go back to the factory set region by pressing set up on the remote and going to TV Aspect, selecting 16:9 wide with green triangle at side and keying in the following numbers 1397139 then press enter, (ok button). This screen is system information and the region will show as the region your set was when you bought it (factory set). Press clear to exit or power off. You will have to repeat step 5 again if you want a multi region player.
7. This hack is 100% and still works after a power failure.

1 DVD Hack hits, Showing 1 to 1 DVD Hacks

New hacks = New region code/hack comments since your last visit.
Search   Contact us   Privacy Policy   About   Advertise   Forum   RSS Feeds   Statistics   Software   

Site layout: Default Classic Blue