TEncoder Change Log

--2.5
-Added: Support for Speex (FFMpeg only)
-Added: About 840 device presets (old presets will not work!)
-Added: several new skins
-Added: Support for rmvb files as input
-Fixed: Encoding failed if aspect ratio was forced with some video codecs
-Fixed: TEncoder crashed if "Close TEncoder" was selected as post-encode option
-Fixed: Settings weren't saved if "Close TEncoder" was selected as post-encode option 
-Fixed: Video and audio summary problems
-Improved: Audio codec detection (FLAC)
-Updated: MediaInfo to 0.7.60
-Updated: FFmpeg to git-cb3591e

--2.4
-Added: Video "Direct Stream Copy" is going to use selected container
-Added: A few minor UI changes
-Fixed: Selecting Huffyuv disabled all video settings (thx to pintcat)
-Fixed: Huffyuv resizing, aspect ratio etc problems with FFMpeg
-Fixed: FFMpeg is default encoder for Huffyuv now (thx to pintcat)
-Fixed: Audio extraction may not work properly in some cases
-Improved: Audio codec detection
-Updated: AlphaControls to 7.68
-Updated: FFMpeg to git-070b0e1

--2.3
-Added: Support for video codec Huffyuv (thx to pintcat and cauptain)
-Added: Skin "Toxic"
-Fixed: Audio only mode sometimes failed
-Fixed: Audio delay used even though video was disabled
-Fixed: Convertion sometimes failed with files without audio
-Fixed: Passed time was shown wrong
-Fixed: A few UI problems
-Improved: Audio codec detection for audio copying
-Updated: AlphaControls to 7.67

--2.2
-Added: Language info will be shown for audio tracks
-Added: Option to keep audio sampling rate
-Added: Option to keep audio channels
-Added: "Delete" button to Profile editor to delete profiles
-Added: Support for WMAV2
-Added: TEncoder's main window size can be reduced now
-Added: TEncoder will add index if output file already exists
-Added: Option to force encoders to calculate width according to aspect ratio
-Fixed: Logs saving problems (thanks to gnaw)
-Fixed: Changed "Copy" codec to "Direct Stream Copy" (thanks to gnaw)
-Fixed: Problems caused by files without any audio streams
-Fixed: Wrong audio track problem
-Fixed: Filtering problems
-Fixed: Portable version default output path is now application folder (thx to portablefreeware.com/forum users)
-Fixed: Profile editor "Refresh" button press caused profiles to dissappear from main window
-Fixed: Proper skin was not applied when skinning was enabled after fresh start
-Fixed: Some minor UI problmes
-Improved: Some UI changes
-Improved: Filtering options passed to encoder

--2.1
-Added: Cropping (beta)
-Added: Option to disable skinning (thanks to zo-ni)
-Added: Option to do CBR video encoding with FFMpeg
-Fixed: Mencoder hard-coded subtitles eventhought subtitles were disabled (thanks to gnaw)
-Fixed: A few visual problems (thanks to gnaw)
-Fixed: Post-encode action value could not be saved

--2.0.1 Hotfix
-Fixed: Mencoder could not start
-Fixed: Mencoder two pass could not start

--2.0
-Fixed: Didnt keep encoder logs if "Nothing" as post-encode option wasnt selected
-Fixed: FFMpeg could not do two pass h.264 encoding
-Fixed: m2ts files could not be draged and dropped
-Fixed: Custom args were not passed correctly
-Updated: AlphaControls to 7.65
-Updated: MediaInfo.dll to 0.7.58
-Updated: FFMpeg to N-41074-g9c27f29

--1.9
-Added: Option specify custom video width and height values
-Added: Audio extraction now produces valid files
-Added: A new skin: LightBoard
-Fixed: 1440x1080 resolution was passed wrong to the encoders

--1.8.1 Hotfix
-Fixed: New resolution values were not effective
-Fixed: Total progress value would exceed 100

--1.8
-Added: Option to use source folder as output folder
-Added: Hue for skins
-Added: Post-encode option to settings window
-Added: New resolutions
-Added: New fps values
-Improved: Settings window UI layout
-Fixed: 29.99 is corrected to 29.97
-Fixed: Icon resolution problems
-Fixed: Portable version would delete wrong txt files
-Updated: MediaInfo.dll to 0.7.56
-Updated: AlphaControls to 7.63
-Updated: JVCL to 3.45
-Updated: FFMpeg to N-39664-g6bfb304
-Updated: MEncoder and Mplayer to svn-34401

--1.7.1 Hotfix
-Added: Support for m2ts files
-Fixed: FFMpeg two pass problem
-Fixed: FFMpeg aspect ratio problem with VP8
-Improved: A few minor UI improvements

--1.7
-Added: Player
-Added: Range Editor
-Added: Option to specify subtitle delay for each file
-Added: Option to scecify audio delay for each file
-Added: Audio and video bitrates can be entered manually
-Added: 4 more aspect ratio options
-Added: Installer can create folder group in start menu
-Added: MPlayer log
-Added: Two new skins Lucy and Air
-Fixed: MEncoder encode range misscalculation
-Fixed: MEncoder no audio problem
-Fixed: None as video and audio codec warning
-Fixed: Subtitle and audio problems if file removed because it doesn't exist
-Fixed: Drag and drop did not work
-Fixed: Encoding time was not accurate
-Removed: Splash screen because it causes problems with drag and drop
-Improved: Some minor UI changes
-Updated: MediaInfo to 0.7.53
-Updated: AlphaControls to 7.60
-Updated: FFMpeg to git-6833fe4

--1.6
-Added: Option to select audio or video only encoding
-Added: Support for audio encoding (mp3 to aac etc.)
-Added: Support for Webm (VP8 + OggVorbis)
-Added: Splash Screen
-Added: Option to apply range settings to all files in the list
-Fixed: FFMpeg encode range misscalculation
-Fixed: Command lines were not shown in logs
-Fixed: Default skin was not Ubuntu
-Fixed: FFmpeg Mpeg4+AAC+Mp4 problem
-Improved: Encoding screen is merged with main screen
-Updated: AlphaControls to 7.59

--1.5 BETA
-Added: 5.1 channel support
-Added: Option to preserve aspect ratio
-Added: Encoder changes according to selected video codec
-Added: Options to select between multiple audio and subtitle tracks for each file
-Added: Option to specify encoding range (in sec.) for each file
-Added: Encoder output is shown during encoding process
-Added: Skins
-Fixed: AAC encoding problems with MEncoder
-Fixed: A few minor bugs
-Improved: Properties windows shows more info now
-Improved: Some UI changes
-Updated: AlphaControls to 7.57
-Updated: MediaInfo to 0.7.52
-Updated: FFmpeg to N-35966-g1d0ae92
-Updated: MPlayer and MEncoder to Sherpya-SVN-r34401-4.6.2
-Updated: libfaac to 1.28

--1.4
-Moved: Custom options, two pass and subtitle options to "Extra Options" window
-Added: Deinterlaceing
-Added: TEncoder will remember its last position and state
-Added: Custom audio and video options
-Added: Total progress is now updated smoothly
-Added: Open output folder option to post-encode options
-Added: Files that do not exist will be removed from list before encoding starts
-Fixed: Temp. folder could not be cleared if encoder log keeping was off
-Fixed: Flv, m4v and m2v files could not be opended sometimes
-Removed: Some of the skins
-Updated: AlphaControls to 7.55
-Updated: MediaInfo to 0.7.51

--1.3
-Added: Option to select what to do after encoding
-Added: Windows 7 taskbar progress
-Added: Option specify audio track for multiple audio tracks
-Added: Properties window now shows multiple audio/vidoe tracks
-Added: Option to specify container for output file 
-Added: New skins
-Added: Shortcut keys
-Added: Drag&Drop support
-Fixed: Two passes being done simultaneously problem
-Fixed: Two pass logs deleted now
-Fixed: FFMpeg path problem with script
-Fixed: FFmpeg video bitrate accuracy problem
-Fixed: Naming issues with script saving on some systems
-Fixed: Some file list menu commands not working
-Fixed: Orignal video size option problem
-Improved: A new UI layout and a few minor changes
-Improved: Encoding window now offers more info
-Updated: MediaInfo to 0.7.50
-Updated: AlphaControls to 7.51
-Updated: MPlayer and Mencoder to r34118

--1.2
-Added: Profiles and profile editor
-Added: Settings window
-Added: 7 Skins
-Added: Saturation option for skins
-Added: More subtitle settings
-Added: A new icon
-Added: A main menu
-Added: A few new options to list menu
-Added: Extra thread options passed to encoders
-Added: Hints to all controls
-Fixed: Two pass log files were not deleted
-Fixed: Mencoder could not encode files to H264
-Fixed: AAc related problems (added faac.dll)
-Fixed: "TEncoder.bat" problem
-Improved: Moved subtitle settings to Settings window 
-Improved: Moved number of processes setting to Settings Window
-Improved: Merged add buttons under a button and a popup menu
-Improved: Set the min. window size
-Improved: Update options are carried to Settings Window
-Updated: MediaInfo to 0.7.46

--1.1--
-Added: Encoder logs
-Added: Two pass options
-Added: Option to pass custom arguments to encoders
-Added: Option to export command lines into a script
-Added: New progress bars
-Fixed: Main window was not disabled when encoding starts 

--1.0--
-First public release