SmartDVB 0.2.5

v0.2.5 Release
changed: small change to show signal also when not able to decode a channel.
fixed: starting udp streaming from the new tools menu option wasn't working correctly, also the menu checkbox was not always updated correctly.
changed: TS recording is now default on new installations (as mpeg does not yet work correctly for ac3).
changed: some changes to shutdown code as some were having problems there it seems, untested yet as for me it worked without hickups before already.
changed: mousewheel/middle mouse button now switches between floating and main when set in settings.
fixed: latitude for newly added satellite was wrongly set to DVB-S instead of the degree value due to recent changes (and me not testing adding new sats ofcourse).
fixed: small fix when exiting app with recording on and cancelling the exit the video would become unstable.
fixed: some fixes to the scheduling functionality. There was a crash when adding a schedule action from the epg's. Also now the now event scheduling will try to change the starting time so the event actually runs (before it wouldn't as the start time was in the past and the ms scheduler in such case ignores such an event.)
fixed: blindscanner would sometimes not pick up frequencies correctly at the end of the frequency range. min/max sr processing was not working correctly in blindscanner. Also some fix to try to also blindscan correctly at the end of a range (sometimes a last valid frequency was missed it seems).
fixed: some fixes to no signal processing in scanner, let me know if you still encounter problems here.
fixed: gotosat functionality in add frequencies dialog in my case was not always operational, hopefully fixed.
updated: blindscanner strings moved to resources to make translations possible (and other recently added strings, let me know if you're still missing something during translations).
fixed: Some fixes to the sync dialog. Some fecs were being wrongly imported in the sync dialog (91 to smart should be 910) and modulation changes are now also reflected in color changes.
fixed: Numeric keypad should now work again on keyboard input selection (hard to find little bug).
fixed: more udp fixes as in some cases buffer overruns could be wrongly generated due to misconfiguration.
changed: setup filter.ini updated to reflect current codec use better (LAV/MS DTV etc).
changed: updated crazycat streamreader.dll installed to latest one.
fixed: some more fixes to no-signal processing.
fixed: some fixes to switch handling in blindscanner (thanks to moonchild once again for testing this).
updated: transponder lists updated (sats only).
updated: small changes to old bdas.dev stream processing (analog to my recent changes in bda.dev) should make this also more stable with stream, but still use bda.dev for now (in future i might revise and update bdas.dev as this module probably will work better for things like multiple devices, more modular built). Also the smartdump.ax filter used by this was not correctly rebuilt before (still used some older directshow sdk, so maybe this was the reason bdas.dev didn't work that well for some).
fixed: handling of bandstacked lnb's (dbs/fss) as polarization was not always set correctly here (untested).
fixed: small fix which might affect application stability when tuning lots of no-signal or bad signal channels in one go.
fixed: small fix in channel processing which could result in some wrongly lost channels.
fixed: various small fixes in install process (in some cases if things didn't go the default way let's say smart needed to be restarted for the video to work correctly (eg. when failing to start the initial device and needing to select another one).
fixed: some changes to bandstacked dishpro handling which were not working correctly (untested yet).
fixed: some little timing changes to bda.dev (for better stability hopefully).
fixed: atsc was broken due to recent clear-qam support changes (clear-qam still untested, atsc should work again).
fixed: more changes to band-stacked lnb handling in bda.dev and blindscan.dev.
fixed: some changes after rebuild long recordings failed after some hours in the taskbar, oddly enough i'm sure this didn't happen before the new system rebuild with the same compiler (so there are subtle differences even if the same settings, i'll have to test this some more i'm afraid).
fixed: some changes to bda.dev concerning clear-qam (atsc digital cable) handling as this wasn't working yet (tuning space addition/changes, untested).
fixed: some more bugfixes and fixes to blindscan.dev among others again concerning band-stacked lnb's.
fixed: bug in bda.dev which would show zero level in some situations while there actually was level detected.
fixed: still video filter wasn't working with audio channels.Seems to work again, not tested much.
added: alternative signal detection to bda.dev (under device settings).
fixed: some window showing problems when moving from floating to main etc under certain conditions the main window would be hidden instead of shown.
fixed: usals changes were not enabling apply button.
changed: updated american transponder list files (thanks to ger).

Easy to use and user friendly interface .
Low footprint, fast operation with fast channel changing.
Supports Skystar 2 WDM and BDA-S/T/C and ATSC devices.
Includes a BlindScanner (as of 0.2.5 RC1) which also scans for channels (your blindscan card must be supported by the crazycat streamreader.dll blindscan interafce)
Supports SkyWalker devices used in North America for turbo-fec modulations.
Supports diseqc (depending on DVB device used) including motor support.
OSD (on-screen-display) which can also be used as a basic HTPC setup through remote.
DiSeqC support includes using cascaded switches setups (diseqc 1.1)
H264 and S2 support (through bda driver) so you can enjoy full HD channels.
You can create scheduled record tasks for your favorite tv programs .
Supports teletext and multi audio channel, including teletext subtitles.
Supports MD-API plugins.
Supports MPEG and TS record formats .
Supports Windows XP® ,Windows Vista® and Windows 7® operating system .
Includes integrated EPG (Electronic Program Guide)
Supports timeshifting also for H264 channels.
Supports winlirc remotes and native remotes (depending on DVB device used)
Supports basic CI (Common interface)
Optimized EVR (Enhanced Video Renderer) support
Favorite channel list so you can arrange your channels as you want
Remote channel list so you can arrange your channels for customized use with your remote
Snapshots so you can make an image in BMP format of the current channel
UDP streaming to other pc's using a UDP capable viewer like VLC.
Allows you to use multiple monitors in the fullscreen/application mode.
Customizable for usage in North America (scanner and epg parser)
Customizable input settings for keyboard or remotes.
DVB subtitles (not fully functional yet).