Forum Archive Home -> DVD & Blu-ray Writers -> LITE-ON LH-20A1H Problem
| LITE-ON LH-20A1H Problem | ||
| mn072065 posted 2007 Mar 06 18:02 | ||
| Some help please. It's a weird problem that I need some experts advice. I have two burners, my Lite-On and Benq DW1640. On my Lite-On using dvdshrink 3.2 and anydvd, I can't backup my legal copy of an old movie, but with the Benq I can. I have the latest firmware on the lite-on LL06. Why would this happened? I also have Region Free uitility for lite-on that i converted to. Does my Lite-On have a problem, or setting that i'm not doing? Thanks all. | ||
| mn072065 posted 2007 Mar 06 18:04 | ||
| Sorry forgot to show you the error I get.
DVDSHRINK encountered an error and cannot continue. Failed to read file. Copy Protection error, the read failed because the sector is encrypted. Thanks again. | ||
| budz posted 2007 Mar 06 19:42 | ||
Use Ripit4me to rip the files first which incorporates DVD DECRYPTER, DVDSHRINK & FIXVTS. I doubt there's something wrong with your LITEON 20x dvd burner. Try using Ripit4me and see what happens then report back here with your results. http://www.ripit4me.org/download.html http://www.ripit4me.org/guide.html http://download.videohelp.com/FixVTS/ | ||
| mn072065 posted 2007 Mar 06 22:02 | ||
| The point is how come I can use the Benq burner with no problem and get the error with Lite-On. Is there a setting I need to change. I have used Ripit4Me but all i'm trying to find out if the Lite-On burner has problems or has anyone had problems like this before. Thanks. | ||
| OneSickPup posted 2007 Mar 07 07:28 | ||
| If I'm understanding you correctly I don't think what you're describing is all that unusual. No two drives (even of the same make/model) will perform exactly the same when it comes to reading and error correction capabilities. You said it was an old movie which may have diminished readability due to micro-scratches, residue, you name it. What you describe is one of the advantages of having multiple drives.
:D At least one of the drives reads it fine. | ||
| bevills1 posted 2007 Mar 07 12:49 | ||
| I've had similar DVDShrink problems with Pioneer and NEC drives, and running DVDDecrypter first and then DVDShrink has always worked which means budz suggestion should work since Ripit4me incorporates those programs. | ||
| ossie posted 2008 Jul 08 06:23 | ||
| Hi everyone, I'm new here & wanted to ask a question about problems I'm suddenly having with DVD Shrink. I did a search to see if anyone else had reported the same error and found this thread. In my case the error:
DVD Shrink encountered an error and cannot continue. Failed to read file D:\ Copy protection error - the read failed because the sector is encrypted. has only just started to appear on my PC. I haven't changed the burner or anything with my operating system (that I am aware of anyway!) & have the most recent version of AnyDVD installed. I've been using AnyDVD & DVD Shrink on this machine for about 18 months with no problems then suddenly I get this error for almost every disk I put in it. I've experimented with loading the same versions of AnyDVD & DVD Shrink on my machine at work and also a friends machine and they are working fine with disks that are being rejected on my PC. Can anyone shed any light on what might have gone wrong or anything I can do to rectify the problem please? | ||
| KBeee posted 2008 Jul 08 07:39 | ||
| Talk about resurrecting an old thread....
DVDShrink hasn't been updated for a couple of years, so use the latest version of DVDFabDecryptor to rip your files to your hard disk instead. | ||
| jd29 posted 2008 Jul 11 10:38 | ||
| I've been trying to burn a dvd with mine as well and it quits in the finalizing stage - using two different programs - dvd flick and arcsoft showbiz 2... it will burn a audio and data cd however... but no luck with burning a dvd -
i'm out of warranty by 3 months - any suggestions on something i can do to see if it's the burner or the software i'm using? thanks, John i am using maxell dvd+r discs - when i insert the disc it shows up on "my computer" as a cd i inserted a dvd and it showed up as a dvd-ram drive in "my computer" but i couldn't get any sound when i played it this has me thinking the drive is bad?? | ||
| bevills1 posted 2008 Jul 11 11:57 | ||
| Try IMGBurn to see if that helps, and try upgrading firmware if that's not been done. You might also try Verbatim or Taiyo-Yuden media since Maxell is not good media. | ||
| jd29 posted 2008 Jul 11 13:35 | ||
| dvd flick has img burn in it as part of the program - it burns the dvd
that is when i got the error - can't remember exactly - something about no address - i saved the log but i'm not around my home computer right now to see thanks for the heads up on maxell - odd that a name such as maxell wouldn't be good media | ||
| bevills1 posted 2008 Jul 12 13:02 | ||
| You might try a different firmware. I have a LiteOn SHM-165P6S that wouldn't reliably burn Playo +R (fake MCC004, cheap media too) with latest firmware, but flash back to next latest firmware burns same cheap media without problems. BTW I also get best SL burns with Smart Burn disabled as well. |
Login/Register to our forum to be able to post here.