Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.


What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:


DVD Player Hacks Updated Add
Sony DVP-NS725P 9 user region code/hacks October 18, 2012 Post region code/hack comment
Region code hack posted by Zizou 2000, June 02 2003:

Tried the directions found at:
http://www.selen.org/sonydvd.html

and regardless of the sequence (once/twice, on or stanby) the only result I have had is that the DVD powers up and goes back to standby. The message remains the same, WELCOME and it remains region1.

Thought I'd pass that along.



Region code hack posted by Herrdoctorr, September 20 2003:

This region free hack also works for the DVP-NS725P using the original remote control.If the first one fail try the second one, it works like a charm.
Thanks a lot....
Region code and Macrovision hack posted by Hayley Brimecome at July 27 2003:

SONY DVP-NS300, DVP-NS305, DVP-NS400D, DVP-NS700, DVP-S330, DVP-S335, DVP-S360, DVP-S336, DVP-S525D, DVP-S530D, DVP-S535D, DVP-S536D, DVP-S725D, DVP-S735D

Multi-Region:

Turn On the unit with the remote controller
Wait until "no disc" appears in the unit's display
Press Pause, 3, 1, 4, 1, 5, 9
The word "CODE" should appear in the display
Within five seconds, press the key that corresponds to the zone you want i.e. 0 for region free, 1 for region 1, 2 for region 2 and so on
Again, within 5 seconds, press Pause and Power
If the above fails to work then you may wish to try the following:

Put the player into Standby mode
Press 1 and Return on remote for region 1, 2 and Return for region 2, and so on. Use 0 and Return to return player to default region settings
Press P-Mode and Return to play DVD's with the selected region, auto-switching is Off
Press Audio and Return for auto-switching On
Press Angle and Return for MacroVision On
Press Subtitle and Return for MacroVision Off





Region code hack posted by Herrdocktorr, October 01 2003:

I just would like to let very clear that my dvd player is NTSC and I got it from COSTCO at EL CENTRO CALIFORNIA USA as far as I know US transmision system IS NTSC.
I have allready play region 1,2 and 4 in the dvd player.
As a matter of fact the specific hack that workd it for me is this:
Put the player into Standby mode
Press 1 and Return on remote for region 1, 2 and Return for region 2, and so on. Use 0 and Return to return player to default region settings
Press P-Mode and Return to play DVD's with the selected region, auto-switching is Off
Press Audio and Return for auto-switching On
Press Angle and Return for MacroVision On
Press Subtitle and Return for MacroVision Off
This model of dvd player goes into standby mode when you turn it off via remote control.
Best regards







Region code hack posted by Fred, October 29 2003:

Hi, ALL.

DVD-player Sony DVP-NS725P r1/r3/r2-Japan don,t have solderless upgrade
(Example: PDA, DESKTOP, IRC, CD - R and etc....) in
variant MULTIREGION, and NTSC and PAL-enable, and Macrovision OFF.

The modification of this player is done only through special
Sony-Data-service-cable and special firm software through plugs
On main-board (plug CN-103) and on IR-board (plug CN-405).


Best
regards
Fred






Region code hack posted by Mason, October 30 2003:

I modified the hardware of NS725P, and attached a switch so that I can select R1 or R2.
But theoretically, you can choose any region by the hardware modification.

The modification itself is pretty easy if you have a knowledge of electronics and a few skills of soldering. It's just mounting/replacement of a few chip R, and attachment of wire to switch.
No special IC is required. I just bought a switch at Radioshack.($2 or $3)
But I don't recommend ordinary people try it.

If you can understand what following web site explains, pls try and enjoy.
Though, unfortunately it is mostly written in Japanese.
http://www.asaka.ne.jp/~kei/NS530.htm

Thanks
Mason



Other hack posted by gizbug, November 26 2004:

Turn On the unit with the remote controller
Wait until "no disc" appears in the unit's display
Press Pause, 3, 1, 4, 1, 5, 9
The word "CODE" should appear in the display
Within five seconds, press the key that corresponds to the zone you want i.e. 0 for region free, 1 for region 1, 2 for region 2 and so on
Again, within 5 seconds, press Pause and Power

Does not work on DVP-NS725P at all



Other hack posted by rlayton, January 24 2006:

Region code hack posted by Herrdoctorr, September 20 2003:

Both methods did NOT work for me either.



Region code hack posted by gigity, November 20 2010:

region code



Region code hack posted by RJ1, October 18 2012:

Now region 1 only - need multi-region




1 DVD Hack hits, Showing 1 to 1 DVD Hacks
 - 

New hacks = New region code/hack comments since your last visit.
Search   Contact us   About   Advertise   Forum   RSS Feeds   Statistics   Tools   

Site layout: Default Classic Blue

Affiliates: codecs.com   VSO Software

©1999-2014 videohelp.com