What are region codes, country codes, or zone locks? Read the DVD Demystified FAQ section 1.10.
| DVD Player | Hacks | Updated | Add | |
| Sony DVP-NS700P | 5 user region code/hacks | April 04, 2007 | Post region code/hack comment | |
Put the player in standby mode and enter: [NEXT >>] [ENTER] | ||||
I tried the next enter stuff but it did not work.. any news? | ||||
Hi, ALL. DVD-player Sony DVP-NS700P r1/r3/r2-Japan don,t have solderless upgrade (Example: PDA, DESKTOP, IRC, CD - R and etc....) in variant MULTIREGION, and NTSC and PAL-enable, and Macrovision OFF. The modification of this player is done only through special Sony-Data-service-cable and special firm software through plugs On main-board (plug CN-103) and on IR-board (plug CN-405). Best regards Fred | ||||
IT was mentioned there is a special cable and plug. Where do you get this from? | ||||
DVP-NS300, DVP-NS305, DVP-NS400D, DVP-NS700, DVP-S330, DVP-S335, DVP-S360, DVP-S336, DVP-S525D, DVP-S530D, DVP-S535D, DVP-S536D, DVP-S725D, DVP-S735D, Multi-Region: • Turn On the unit with the remote controller • Wait until "no disc" appears in the unit's display • Press Pause, 3, 1, 4, 1, 5, 9 • The word "CODE" should appear in the display • Within five seconds, press the key that corresponds to the zone you want i.e. 0 for region free, 1 for region 1, 2 for region 2 and so on • Again, within 5 seconds, press Pause and Power If the above fails to work then you may wish to try the following: • Put the player into Standby mode • Press 1 and Return on remote for region 1, 2 and Return for region 2, and so on. Use 0 and Return to return player to default region settings • Press P-Mode and Return to play DVD's with the selected region, auto-switching is Off • Press Audio and Return for auto-switching On • Press Angle and Return for MacroVision On • Press Subtitle and Return for MacroVision Off | ||||
| 1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
-
|
New hacks = New region code/hack comments since your last visit.
