Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.

What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:


DVD Player Hacks Updated Add
Pioneer DVR-440H

5 user region code comments

February 24, 2007 Post region code/hack comment
PostRegion code hack posted by Support@PioneerFAQ, August 11 2006:


You make this multiregional the same way you make the newer Pioneer dvd players multiregional.
Take a look at: http://www.pioneerfaq.info



PostRegion code hack posted by ChainsawDude, September 01 2006:


see hack for Pioneer DVR-440HX



PostRegion code posted by KyriacosMETAL, November 23 2006:


The following region hack works on all new pioneer dvd players. Many people don't have a PDA or a Palm, so the easiest way to do a region hack follows:

All you need is a motherboard with onboard IRDA. Most motherboards have an onboard irda connector so all you need to buy is a cheap irda motherboard adaptor ( check http://www.actisys.com/act210.html).

Then you have to modify some ini files:

1) Remove folowing strings from netirsir.inf:

%*PNP0510.DevDesc% = PNP, *PNP0510
%*PNP0511.DevDesc% = PNP, *PNP0511

and replace

ExcludeFromSelect=*PNP0510,*PNP0511,*IBM0002,*IBM0034,*IBM0020

to

ExcludeFromSelect=*IBM0002,*IBM0034,*IBM0020

2) Add to msports.inf to section [Std]:

%*PNP0510.DeviceDesc% = ComPort, *PNP0510, *PNP0511 ; Communications Port
%*PNP0511.DeviceDesc% = ComPort, *PNP0511, *PNP0510 ; Communications Port

to section [Strings]:

*PNP0510.DeviceDesc = "Generic Ir Serial Port"
*PNP0511.DeviceDesc = "Generic Ir Serial Port"

add

ExcludeFromSelect=*PNP0510,*PNP0511

to section [ControlFlags]

When you do this windows will recognise irda port as : Generic Ir Serial Port
If you modified the ini files and windows didn't recognise your irda port as Generic Ir Serial Port then remove the irda port and restart your pc. Windows will now find a new hardware (Generic Ir Serial Port) and install it.

Then type the following in a text file:

# Make your Pioneer DVD Player Region Free Easily
# Region Free remote codes by KyriacosMETAL
#

begin remote

name pioneer
flags RAW_CODES
eps 30
aeps 100
ptrail 0
repeat 0 0
gap 35000

begin RAW_codes
name region
8575 4211 576 1547 576 1547
576 493 576 493 576 493
576 1547 576 493 576 1547
576 493 576 493 576 1547
576 1547 576 1547 576 493
576 1547 576 493 576 1547
576 493 576 493 576 1547
576 1547 576 493 576 493
576 1547 576 493 576 1547
576 1547 576 493 576 493
576 1547 576 1547 576 493
576
25454
8575 4211 576 1547 576 1547
576 1547 576 1547 576 493
576 1547 576 493 576 1547
576 493 576 493 576 493
576 493 576 1547 576 493
576 1547 576 493 576 1547
576 493 576 1547 576 1547
576 493 576 1547 576 493
576 1547 576 493 576 1547
576 493 576 493 576 1547
576 493 576 1547 576 1547
576
end RAW_codes

end remote

Save this text file under the name pioneer.conf

Then download Winlirc from http://winlirc.sourceforge.net/
Put the following settings in winlirc:
Reciever type: RX
Virtual Pulse: 300
Speed: 115200
Transmitter Settings: Unselect hardware carrier and select TX
Config: Choose the pioneer.conf file

When you do all these, close the settings page. Choose Pioneer remote and then click: "Send Code"

Your pioneer DVD player n now region free. Enjoy!



PostRegion code hack posted by Peter Malmström, December 31 2006:


region free



PostRegion code hack posted by Nunez, February 24 2007:


Zone fre region 1 & 2




1 DVD Hack hits, Showing 1 to 1 DVD Hacks
   

New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!
Search   Contact us   Privacy Policy   About   Advertise   Forum   RSS Feeds   Statistics   Software   

Site layout: Default Classic Blue

Affiliates: free-codecs.com

©1999-2024 videohelp.com