Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.

What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:


DVD Player Hacks Updated Add
Panasonic DMR-BWT835 3 user region code/hacks March 24, 2014 Post region code/hack comment
Region code hack posted by WillSelf, March 18 2014:


http://www.videohelp.com/dvdhacks/panasonic-dmp-bdt500/11801

Copying the hack in the above link worked for me on this recorder,
I used the latest firmware which I first upgraded to, and used a One for All
remote control.

Steps below are copied from the post on the link above.

Preparation:
1 - select DVD device on remote,
2 - hold [magic] until the DVD LED lights indicate the press
3 - enter 0490 (DVD LED blinks twice).


Now program button 1,2,3,4,5,6,7,8,9 and 0 with the
following codes:
1. 00191
2. 00120
3. 00065
4. 00180
5. 00143
6. 00155
7. 00122
8. 00117
9. 00129
0. 00123

Use the following steps to program each button:
1 - hold [magic] until the DVD LED lights up (blinks twice on my remote)
2 - press 994 (DVD LED blinks twice),
3 - press [magic],
4 - enter the 5 digit code from above,
5 - press the number button listed, before the code above,
to assign the code to it (DVD LED blinks twice).

Example (button 1 on the control):
Hold [magic] until DVD LED is lit -> press 994 -> press
[magic] -> press 00191 -> press 1.


Switch on DVD player, make sure there is no disc in it.
Press the One For All Remote buttons in the following
sequence
1, 2, 3, 4, 5, 6, 7, 8, 9, 0

The player will restart and then it should be DVD region free.

Good luck.




Region code posted by readyemail, March 19 2014:

This hack seems to work on most Panasonic models on this site.. Do you know if this works for devices that were sources in Region 1 (US)? I have tried this same hack several times on my Panasonic device using a UK sourced One for All remote to no avail.



Region code hack posted by Slimebank, March 24 2014:

American Panasonic devices have been software restricted to NTSC-only playback.

You need to install 3rd party firmware to bypass that restriction and to be able to change DVD and Blu-ray region settings.

http://www.firmwareinfo.com




1 DVD Hack hits, Showing 1 to 1 DVD Hacks
 - 

New hacks = New region code/hack comments since your last visit.
Search   Contact us   About   Advertise   Forum   RSS Feeds   Statistics   Tools   

Site layout: Default Classic Blue

Affiliates: codecs.com   VSO Software

©1999-2014 videohelp.com