Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.

What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:  
Hits per page:


DVD Player Hacks Updated Add
Panasonic DMP-BD65

4 user region code comments

March 08, 2015 Post region code/hack comment
PostRegion code hack posted by videomaster2307, April 28 2010:


I just applied to the Panasonic DMP-BD65 the (first and for the moment only) region code hack posted in the section for the Panasonic DMP-BD60. I works also very well for the DMP-BD65. I used an older "Kameleon 6" remote control which is also okay (instead of the "Kameleon 8").



PostRegion code hack posted by satyricon, December 04 2010:


I got a Panasonic DMP-BD65 Blu-Ray player and Kameleon URC 9960 B01
remote control in USA. Here it is how I made it DVD-region free based on
suggestions I got from forums.

(http://www.videohelp.com/dvdhacks/panasonic-dmp-bd60/10033)
(http://www.remotecentral.com/cgi-bin/mboard/rc-one4all/thread.cgi?
5631)

Protocol:
Set up the DVD button on the Remote to control the player using code 0490.
The instructions on how to do this is in the Kameleon URC 9960 manual.

Then reprogram these advanced codes to the numeric keys.
1. press and hold SETUP for two blinks
2. press OTHER
3. enter 9-9-4
4. press the DEVICE key (=press DVD icon here)
5. press SETUP for one blink
6. enter advanced code
7. pick a key
8. redo step 2 through 7 for all the codes below.

key 1, code 00191
key 2, code 00120
key 3, code 00065
key 4, code 00180
key 5, code 00143
key 6, code 00155
key 7, code 00122
key 8, code 00117
key 9, code 00129
key 0, code 00123

(If the 9960 is B00 version it takes 3 digit adavanced codes (w/o 00), if it is
the B01 version, 5 digit advanced codes as above.)
Switch on Blu-Ray player, make sure their is no disc in it.
Press the Kameleon URC 9960 buttons in the following sequence with about a
second pause between presses.

1, 2, 3, 4, 5, 6, 7, 8, 9, 0

The Blu-Ray player should reboot itself and then it should play DVD from any
region. ( I also tried this w/ BD85K and it works. )



PostRegion code hack posted by Slimebank, January 31 2011:


A warning for people with American Panasonic Blu-ray players:

It is not possible to "hack" an American Panasonic Blu-ray device with just a remote control.

If you apply the remote control button sequence to an American Panasonic Blu-ray device, you will only gain the ability to play NTSC discs from different regions !

American Panasonic Blu-ray devices are restricted to NTSC playback.

This restriction can only be removed by installing enhanced firmware.

Do a google search for "dmp-bd65 enhanced firmware" and you will get the idea.



PostRegion code hack posted by grahamkilburn, March 08 2015:


Panosonic DMP-BD65, region hack to region 0




1 DVD Hack hits, Showing 1 to 1 DVD Hacks
   

New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!
Search   Contact us   Privacy Policy   About   Advertise   Forum   RSS Feeds   Statistics   Software   

Site layout: Default Classic Blue

Affiliates: free-codecs.com

©1999-2024 videohelp.com